Home

Spopi can only work on Raspberry Pi 2 and 3

Installation

Raspbian 2016-02-26

Download last Raspbian Jessie img here

• Install Raspbian on Mac
• Install Raspbian on Linux
• Install Windows on Linux

Then you can insert the µSD card in the Raspberry Pi 2

Default keyboard configuration

sudo raspi-config => International option and change keyboard layout if needed. Default is english => expand filesystem

Then you can reboot the Raspberry

Network

To set DHCP on the network interface Replace in /dev/network/interface/ iface eth0 inet manual by iface eth0 inet dhcp

If you want static IP address, you have to replace in /dev/network/interface/ iface eth0 inet manual by

auto eth0
iface eth0 inet static
        address 192.168.2.16
        netmask 255.255.255.0
        gateway 192.168.2.1
        dns-nameservers 192.168.2.1

And then relaunch the network with sudo service networking restart Now you can test the network: ping www.ipgp.fr

Dependencies

wget -O /tmp/spopi_install.bash https://raw.githubusercontent.com/IPGP/Spopi/master/spopi_install.bash 
or
wget -O /tmp/spopi_install.bash https://goo.gl/bEwmmC

bash /tmp/spopi_install.bash

Spopi

They are two simple example of Spopi usage in /home/pi/visu:

drum-line

2/3 of the screen with a drum plot and 1/3 of the screen with a line plot

two-drums

half of the screen with a station, the other half with another one

three-lines

3 line-plot stations

You can modify them and choose which of those programms will start at the end of /home/pi/visu/screen_on.bash

To modify th settings, you can either connect to the Raspberry with ssh or change tty