Error when open the fusion model version2

[CS4Liu]

Hello,I try to use Autodesk Fusion 360 to open the fusion model version2 for more details of Doggo.But when I upload the 'Full Doggo Assembly.f3z' in the Autodesk Fusion 360 the error comes:

Do know how can I solve this problem？
Thanks!

[CrazyAZ]

I see that you have closed this issue. Did you find a solution to it? Someone else is having the same problem, but I cannot find anything wrong in the CAD.

[CS4Liu]

I didn't find solution to it. There still error when uploading the version2.Instead, I just download the Inventor 2018 version of the model, then open the '.ipt' file using Autodesk fusion 360 software. then it works. And I think there is some wrong with the model v172 in https://a360.co/2CPZoto because it has became like this now:

…

------------------ 原始邮件 ------------------ 发件人: "Aaron Schultz"<notifications@github.com>; 发送时间: 2019年7月31日(星期三) 中午12:43 收件人: "Nate711/StanfordDoggoProject"<StanfordDoggoProject@noreply.github.com>; 抄送: "csliu"<773849295@qq.com>;"State change"<state_change@noreply.github.com>; 主题: Re: [Nate711/StanfordDoggoProject] Error when open the fusion modelversion2 (#29) I see that you have closed this issue. Did you find a solution to it? Someone else is having the same problem, but I cannot find anything wrong in the CAD. — You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub, or mute the thread.

[maxsu]

@CS4Liu, @CrazyAZ - this is still an issue with the project. It's caused by corrupted Simstudies: See the last post of #34, as well as this fusion 360 support thread for a repaired version of the file.

I'd like to get this issue resolved. Can I join the CAD team?