diff --git a/dox/doxygen/doxyfile.in b/dox/doxygen/doxyfile.in
index b4f0062ca..93f6b0af2 100644
--- a/dox/doxygen/doxyfile.in
+++ b/dox/doxygen/doxyfile.in
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.16
+# Doxyfile 1.11.0
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -12,6 +12,16 @@
 # For lists, items can also be appended using:
 # TAG += value [value, ...]
 # Values that contain spaces should be placed between quotes (\" \").
+#
+# Note:
+#
+# Use doxygen to compare the used configuration file with the template
+# configuration file:
+# doxygen -x [configFile]
+# Use doxygen to compare the used configuration file with the template
+# configuration file without replacing the environment variables or CMake type
+# replacement variables:
+# doxygen -x_noenv [configFile]
 
 #---------------------------------------------------------------------------
 # Project related configuration options
@@ -53,6 +63,12 @@ PROJECT_BRIEF          =
 
 PROJECT_LOGO           =
 
+# With the PROJECT_ICON tag one can specify an icon that is included in the tabs
+# when the HTML document is shown. Doxygen will copy the logo to the output
+# directory.
+
+PROJECT_ICON           =
+
 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
 # into which the generated documentation will be written. If a relative path is
 # entered, it will be relative to the location where doxygen was started. If
@@ -60,16 +76,28 @@ PROJECT_LOGO           =
 
 OUTPUT_DIRECTORY       = "@ELASTIX_HELP_DIR@"
 
-# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create up to 4096
+# sub-directories (in 2 levels) under the output directory of each output format
+# and will distribute the generated files over these directories. Enabling this
 # option can be useful when feeding doxygen a huge amount of source files, where
 # putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
+# performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to
+# control the number of sub-directories.
 # The default value is: NO.
 
 CREATE_SUBDIRS         = NO
 
+# Controls the number of sub-directories that will be created when
+# CREATE_SUBDIRS tag is set to YES. Level 0 represents 16 directories, and every
+# level increment doubles the number of directories, resulting in 4096
+# directories at level 8 which is the default and also the maximum value. The
+# sub-directories are organized in 2 levels, the first level always has a fixed
+# number of 16 directories.
+# Minimum value: 0, maximum value: 8, default value: 8.
+# This tag requires that the tag CREATE_SUBDIRS is set to YES.
+
+CREATE_SUBDIRS_LEVEL   = 8
+
 # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
 # characters to appear in the names of generated files. If set to NO, non-ASCII
 # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
@@ -81,26 +109,18 @@ ALLOW_UNICODE_NAMES    = NO
 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
 # documentation generated by doxygen is written. Doxygen will use this
 # information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian,
+# Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English
+# (United States), Esperanto, Farsi (Persian), Finnish, French, German, Greek,
+# Hindi, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with
+# English messages), Korean, Korean-en (Korean with English messages), Latvian,
+# Lithuanian, Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese,
+# Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish,
+# Swedish, Turkish, Ukrainian and Vietnamese.
 # The default value is: English.
 
 OUTPUT_LANGUAGE        = English
 
-# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all generated output in the proper direction.
-# Possible values are: None, LTR, RTL and Context.
-# The default value is: None.
-
-OUTPUT_TEXT_DIRECTION  = None
-
 # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
 # descriptions after the members that are listed in the file and class
 # documentation (similar to Javadoc). Set to NO to disable this.
@@ -227,6 +247,14 @@ QT_AUTOBRIEF           = NO
 
 MULTILINE_CPP_IS_BRIEF = NO
 
+# By default Python docstrings are displayed as preformatted text and doxygen's
+# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the
+# doxygen's special commands can be used and the contents of the docstring
+# documentation blocks is shown as doxygen documentation.
+# The default value is: YES.
+
+PYTHON_DOCSTRING       = YES
+
 # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
 # documentation from any documented member that it re-implements.
 # The default value is: YES.
@@ -250,16 +278,16 @@ TAB_SIZE               = 2
 # the documentation. An alias has the form:
 # name=value
 # For example adding
-# "sideeffect=@par Side Effects:\n"
+# "sideeffect=@par Side Effects:^^"
 # will allow you to put the command \sideeffect (or @sideeffect) in the
 # documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines (in the resulting output). You can put ^^ in the value part of an
-# alias to insert a newline as if a physical newline was in the original file.
-# When you need a literal { or } or , in the value part of an alias you have to
-# escape them by means of a backslash (\), this can lead to conflicts with the
-# commands \{ and \} for these it is advised to use the version @{ and @} or use
-# a double escape (\\{ and \\})
+# "Side Effects:". Note that you cannot put \n's in the value part of an alias
+# to insert newlines (in the resulting output). You can put ^^ in the value part
+# of an alias to insert a newline as if a physical newline was in the original
+# file. When you need a literal { or } or , in the value part of an alias you
+# have to escape them by means of a backslash (\), this can lead to conflicts
+# with the commands \{ and \} for these it is advised to use the version @{ and
+# @} or use a double escape (\\{ and \\})
 
 ALIASES                = "parameter=\xrefitem parameter \"Parameters\" \"Parameters\"" \
                          "transformparameter=\xrefitem transformparameter \"Transform Parameters\" \"%Transform Parameters\"" \
@@ -305,19 +333,22 @@ OPTIMIZE_OUTPUT_SLICE  = NO
 # parses. With this tag you can assign which parser to use for a given
 # extension. Doxygen has a built-in mapping, but you can override or extend it
 # using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice,
-# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran:
+# language is one of the parsers supported by doxygen: IDL, Java, JavaScript,
+# Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice,
+# VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran:
 # FortranFree, unknown formatted Fortran: Fortran. In the later case the parser
 # tries to guess whether the code is fixed or free formatted code, this is the
-# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat
-# .inc files as Fortran files (default is PHP), and .f files as C (default is
-# Fortran), use: inc=Fortran f=C.
+# default for Fortran type files). For instance to make doxygen treat .inc files
+# as Fortran files (default is PHP), and .f files as C (default is Fortran),
+# use: inc=Fortran f=C.
 #
 # Note: For files without extension you can use no_extension as a placeholder.
 #
 # Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
+# the files are not read by doxygen. When specifying no_extension you should add
+# * to the FILE_PATTERNS.
+#
+# Note see also the list of default file extension mappings.
 
 EXTENSION_MAPPING      =
 
@@ -335,11 +366,22 @@ MARKDOWN_SUPPORT       = YES
 # to that level are automatically included in the table of contents, even if
 # they do not have an id attribute.
 # Note: This feature currently applies only to Markdown headings.
-# Minimum value: 0, maximum value: 99, default value: 5.
+# Minimum value: 0, maximum value: 99, default value: 6.
 # This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
 
 TOC_INCLUDE_HEADINGS   = 5
 
+# The MARKDOWN_ID_STYLE tag can be used to specify the algorithm used to
+# generate identifiers for the Markdown headings. Note: Every identifier is
+# unique.
+# Possible values are: DOXYGEN use a fixed 'autotoc_md' string followed by a
+# sequence number starting at 0 and GITHUB use the lower case version of title
+# with any whitespace replaced by '-' and punctuation characters removed.
+# The default value is: DOXYGEN.
+# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
+
+MARKDOWN_ID_STYLE      = DOXYGEN
+
 # When enabled doxygen tries to link words that correspond to documented
 # classes, or namespaces to their corresponding documentation. Such a link can
 # be prevented in individual cases by putting a % sign in front of the word or
@@ -352,8 +394,8 @@ AUTOLINK_SUPPORT       = YES
 # to include (a tag file for) the STL sources as input, then you should set this
 # tag to YES in order to let doxygen match functions declarations and
 # definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
+# versus func(std::string) {}). This also makes the inheritance and
+# collaboration diagrams that involve STL classes more complete and accurate.
 # The default value is: NO.
 
 BUILTIN_STL_SUPPORT    = NO
@@ -365,9 +407,9 @@ BUILTIN_STL_SUPPORT    = NO
 CPP_CLI_SUPPORT        = NO
 
 # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
+# https://www.riverbankcomputing.com/software) sources only. Doxygen will parse
+# them like normal C++ but will assume all classes use public instead of private
+# inheritance when no explicit protection keyword is present.
 # The default value is: NO.
 
 SIP_SUPPORT            = NO
@@ -451,6 +493,27 @@ TYPEDEF_HIDES_STRUCT   = NO
 
 LOOKUP_CACHE_SIZE      = 0
 
+# The NUM_PROC_THREADS specifies the number of threads doxygen is allowed to use
+# during processing. When set to 0 doxygen will based this on the number of
+# cores available in the system. You can set it explicitly to a value larger
+# than 0 to get more control over the balance between CPU load and processing
+# speed. At this moment only the input processing can be done using multiple
+# threads. Since this is still an experimental feature the default is set to 1,
+# which effectively disables parallel processing. Please report any issues you
+# encounter. Generating dot graphs in parallel is controlled by the
+# DOT_NUM_THREADS setting.
+# Minimum value: 0, maximum value: 32, default value: 1.
+
+NUM_PROC_THREADS       = 1
+
+# If the TIMESTAMP tag is set different from NO then each generated page will
+# contain the date or date and time when the page was generated. Setting this to
+# NO can help when comparing the output of multiple runs.
+# Possible values are: YES, NO, DATETIME and DATE.
+# The default value is: NO.
+
+TIMESTAMP              = YES
+
 #---------------------------------------------------------------------------
 # Build related configuration options
 #---------------------------------------------------------------------------
@@ -514,6 +577,13 @@ EXTRACT_LOCAL_METHODS  = YES
 
 EXTRACT_ANON_NSPACES   = NO
 
+# If this flag is set to YES, the name of an unnamed parameter in a declaration
+# will be determined by the corresponding definition. By default unnamed
+# parameters remain unnamed in the output.
+# The default value is: YES.
+
+RESOLVE_UNNAMED_PARAMS = YES
+
 # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
 # undocumented members inside documented classes or files. If set to NO these
 # members will be included in the various overviews, but no documentation
@@ -525,14 +595,15 @@ HIDE_UNDOC_MEMBERS     = NO
 # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
 # undocumented classes that are normally visible in the class hierarchy. If set
 # to NO, these classes will be included in the various overviews. This option
-# has no effect if EXTRACT_ALL is enabled.
+# will also hide undocumented C++ concepts if enabled. This option has no effect
+# if EXTRACT_ALL is enabled.
 # The default value is: NO.
 
 HIDE_UNDOC_CLASSES     = NO
 
 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO, these declarations will be
-# included in the documentation.
+# declarations. If set to NO, these declarations will be included in the
+# documentation.
 # The default value is: NO.
 
 HIDE_FRIEND_COMPOUNDS  = NO
@@ -551,12 +622,20 @@ HIDE_IN_BODY_DOCS      = YES
 
 INTERNAL_DOCS          = NO
 
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES, upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# (including Cygwin) ands Mac users are advised to set this option to NO.
-# The default value is: system dependent.
+# With the correct setting of option CASE_SENSE_NAMES doxygen will better be
+# able to match the capabilities of the underlying filesystem. In case the
+# filesystem is case sensitive (i.e. it supports files in the same directory
+# whose names only differ in casing), the option must be set to YES to properly
+# deal with such files in case they appear in the input. For filesystems that
+# are not case sensitive the option should be set to NO to properly deal with
+# output files written for symbols that only differ in casing, such as for two
+# classes, one named CLASS and the other named Class, and to also support
+# references to files without having to specify the exact matching casing. On
+# Windows (including Cygwin) and MacOS, users should typically set this option
+# to NO, whereas on Linux or other Unix flavors it should typically be set to
+# YES.
+# Possible values are: SYSTEM, NO and YES.
+# The default value is: SYSTEM.
 
 CASE_SENSE_NAMES       = YES
 
@@ -574,6 +653,12 @@ HIDE_SCOPE_NAMES       = NO
 
 HIDE_COMPOUND_REFERENCE= NO
 
+# If the SHOW_HEADERFILE tag is set to YES then the documentation for a class
+# will show which file needs to be included to use the class.
+# The default value is: YES.
+
+SHOW_HEADERFILE        = YES
+
 # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
 # the files that are included by a file in the documentation of that file.
 # The default value is: YES.
@@ -731,7 +816,8 @@ FILE_VERSION_FILTER    =
 # output files in an output format independent way. To create the layout file
 # that represents doxygen's defaults, run doxygen with the -l option. You can
 # optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
+# will be used as the name of the layout file. See also section "Changing the
+# layout of pages" for information.
 #
 # Note that if you run doxygen from a directory containing a file called
 # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
@@ -777,24 +863,50 @@ WARNINGS               = YES
 WARN_IF_UNDOCUMENTED   = YES
 
 # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
+# potential errors in the documentation, such as documenting some parameters in
+# a documented function twice, or documenting parameters that don't exist or
+# using markup commands wrongly.
 # The default value is: YES.
 
 WARN_IF_DOC_ERROR      = YES
 
+# If WARN_IF_INCOMPLETE_DOC is set to YES, doxygen will warn about incomplete
+# function parameter documentation. If set to NO, doxygen will accept that some
+# parameters have no documentation without warning.
+# The default value is: YES.
+
+WARN_IF_INCOMPLETE_DOC = YES
+
 # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
 # are documented, but have no documentation for their parameters or return
-# value. If set to NO, doxygen will only warn about wrong or incomplete
-# parameter documentation, but not about the absence of documentation. If
-# EXTRACT_ALL is set to YES then this flag will automatically be disabled.
+# value. If set to NO, doxygen will only warn about wrong parameter
+# documentation, but not about the absence of documentation. If EXTRACT_ALL is
+# set to YES then this flag will automatically be disabled. See also
+# WARN_IF_INCOMPLETE_DOC
 # The default value is: NO.
 
 WARN_NO_PARAMDOC       = NO
 
+# If WARN_IF_UNDOC_ENUM_VAL option is set to YES, doxygen will warn about
+# undocumented enumeration values. If set to NO, doxygen will accept
+# undocumented enumeration values. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: NO.
+
+WARN_IF_UNDOC_ENUM_VAL = NO
+
 # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
-# a warning is encountered.
+# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS
+# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but
+# at the end of the doxygen process doxygen will return with a non-zero status.
+# If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS_PRINT then doxygen behaves
+# like FAIL_ON_WARNINGS but in case no WARN_LOGFILE is defined doxygen will not
+# write the warning messages in between other messages but write them at the end
+# of a run, in case a WARN_LOGFILE is defined the warning messages will be
+# besides being in the defined file also be shown at the end of a run, unless
+# the WARN_LOGFILE is defined as - i.e. standard output (stdout) in that case
+# the behavior will remain as with the setting FAIL_ON_WARNINGS.
+# Possible values are: NO, YES, FAIL_ON_WARNINGS and FAIL_ON_WARNINGS_PRINT.
 # The default value is: NO.
 
 WARN_AS_ERROR          = NO
@@ -805,13 +917,27 @@ WARN_AS_ERROR          = NO
 # and the warning text. Optionally the format may contain $version, which will
 # be replaced by the version of the file (if it could be obtained via
 # FILE_VERSION_FILTER)
+# See also: WARN_LINE_FORMAT
 # The default value is: $file:$line: $text.
 
 WARN_FORMAT            = "$file:$line: $text"
 
+# In the $text part of the WARN_FORMAT command it is possible that a reference
+# to a more specific place is given. To make it easier to jump to this place
+# (outside of doxygen) the user can define a custom "cut" / "paste" string.
+# Example:
+# WARN_LINE_FORMAT = "'vi $file +$line'"
+# See also: WARN_FORMAT
+# The default value is: at line $line of file $file.
+
+WARN_LINE_FORMAT       = "at line $line of file $file"
+
 # The WARN_LOGFILE tag can be used to specify a file to which warning and error
 # messages should be written. If left blank the output is written to standard
-# error (stderr).
+# error (stderr). In case the file specified cannot be opened for writing the
+# warning and error messages are written to standard error. When as file - is
+# specified the warning and error messages are written to standard output
+# (stdout).
 
 WARN_LOGFILE           =
 
@@ -832,12 +958,23 @@ INPUT                  = "@ELASTIX_DOXYGEN_DIR@/Modules.dox" \
 # This tag can be used to specify the character encoding of the source files
 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: https://www.gnu.org/software/libiconv/) for the list of
-# possible encodings.
+# documentation (see:
+# https://www.gnu.org/software/libiconv/) for the list of possible encodings.
+# See also: INPUT_FILE_ENCODING
 # The default value is: UTF-8.
 
 INPUT_ENCODING         = UTF-8
 
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses The INPUT_FILE_ENCODING tag can be used to specify
+# character encoding on a per file pattern basis. Doxygen will compare the file
+# name with each pattern and apply the encoding instead of the default
+# INPUT_ENCODING) if there is a match. The character encodings are a list of the
+# form: pattern=encoding (like *.php=ISO-8859-1).
+# See also: INPUT_ENCODING for further information on supported encodings.
+
+INPUT_FILE_ENCODING    =
+
 # If the value of the INPUT tag contains directories, you can use the
 # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
 # *.h) to filter out the source-files in the directories.
@@ -846,11 +983,15 @@ INPUT_ENCODING         = UTF-8
 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
 # read by doxygen.
 #
-# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
-# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
-# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
-# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
-# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice.
+# Note the list of default checked file patterns might differ from the list of
+# default file extension mappings.
+#
+# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cxxm,
+# *.cpp, *.cppm, *.ccm, *.c++, *.c++m, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl,
+# *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, *.h++, *.ixx, *.l, *.cs, *.d,
+# *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to
+# be provided as doxygen C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
+# *.f18, *.f, *.for, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice.
 
 FILE_PATTERNS          = *.h \
                          *.dox
@@ -894,10 +1035,7 @@ EXCLUDE_PATTERNS       = */.svn/*
 # (namespaces, classes, functions, etc.) that should be excluded from the
 # output. The symbol name can be a fully qualified name, a word, or if the
 # wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
+# ANamespace::AClass, ANamespace::*Test
 
 EXCLUDE_SYMBOLS        = AdaGrad::SettingsType \
                          AdaptiveStochasticGradientDescent::SettingsType \
@@ -960,7 +1098,7 @@ EXAMPLE_RECURSIVE      = NO
 # that contain images that are to be included in the documentation (see the
 # \image command).
 
-IMAGE_PATH             = ""
+IMAGE_PATH             =
 
 # The INPUT_FILTER tag can be used to specify a program that doxygen should
 # invoke to filter for each input file. Doxygen will invoke the filter program
@@ -977,6 +1115,11 @@ IMAGE_PATH             = ""
 # code is scanned, but not when the output code is generated. If lines are added
 # or removed, the anchors will not be placed correctly.
 #
+# Note that doxygen will use the data processed and written to standard output
+# for further processing, therefore nothing else, like debug statements or used
+# commands (so in case of a Windows batch file always use @echo OFF), should be
+# written to standard output.
+#
 # Note that for custom extensions or not directly supported extensions you also
 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
 # properly processed by doxygen.
@@ -1018,6 +1161,15 @@ FILTER_SOURCE_PATTERNS =
 
 USE_MDFILE_AS_MAINPAGE =
 
+# The Fortran standard specifies that for fixed formatted Fortran code all
+# characters from position 72 are to be considered as comment. A common
+# extension is to allow longer lines before the automatic comment starts. The
+# setting FORTRAN_COMMENT_AFTER will also make it possible that longer lines can
+# be processed before the automatic comment starts.
+# Minimum value: 7, maximum value: 10000, default value: 72.
+
+FORTRAN_COMMENT_AFTER  = 72
+
 #---------------------------------------------------------------------------
 # Configuration options related to source browsing
 #---------------------------------------------------------------------------
@@ -1032,7 +1184,8 @@ USE_MDFILE_AS_MAINPAGE =
 SOURCE_BROWSER         = YES
 
 # Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
+# multi-line macros, enums or list initialized variables directly into the
+# documentation.
 # The default value is: NO.
 
 INLINE_SOURCES         = NO
@@ -1105,16 +1258,24 @@ USE_HTAGS              = NO
 VERBATIM_HEADERS       = NO
 
 # If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
+# clang parser (see:
+# http://clang.llvm.org/) for more accurate parsing at the cost of reduced
+# performance. This can be particularly helpful with template rich C++ code for
+# which doxygen's built-in parser lacks the necessary type information.
 # Note: The availability of this option depends on whether or not doxygen was
 # generated with the -Duse_libclang=ON option for CMake.
 # The default value is: NO.
 
 CLANG_ASSISTED_PARSING = NO
 
+# If the CLANG_ASSISTED_PARSING tag is set to YES and the CLANG_ADD_INC_PATHS
+# tag is set to YES then doxygen will add the directory of each input to the
+# include path.
+# The default value is: YES.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_ADD_INC_PATHS    = YES
+
 # If clang assisted parsing is enabled you can provide the compiler with command
 # line options that you would normally use when invoking the compiler. Note that
 # the include paths will already be set by doxygen for the files and directories
@@ -1124,10 +1285,13 @@ CLANG_ASSISTED_PARSING = NO
 CLANG_OPTIONS          =
 
 # If clang assisted parsing is enabled you can provide the clang parser with the
-# path to the compilation database (see:
-# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files
-# were built. This is equivalent to specifying the "-p" option to a clang tool,
-# such as clang-check. These options will then be passed to the parser.
+# path to the directory containing a file called compile_commands.json. This
+# file is the compilation database (see:
+# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) containing the
+# options used when the source files were built. This is equivalent to
+# specifying the -p option to a clang tool, such as clang-check. These options
+# will then be passed to the parser. Any options specified with CLANG_OPTIONS
+# will be added as well.
 # Note: The availability of this option depends on whether or not doxygen was
 # generated with the -Duse_libclang=ON option for CMake.
 
@@ -1144,10 +1308,11 @@ CLANG_DATABASE_PATH    =
 
 ALPHABETICAL_INDEX     = YES
 
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
+# The IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes)
+# that should be ignored while generating the index headers. The IGNORE_PREFIX
+# tag works for classes, function and member names. The entity will be placed in
+# the alphabetical list under the first letter of the entity name that remains
+# after removing the prefix.
 # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
 
 IGNORE_PREFIX          =
@@ -1226,7 +1391,12 @@ HTML_STYLESHEET        =
 # Doxygen will copy the style sheet files to the output directory.
 # Note: The order of the extra style sheet files is of importance (e.g. the last
 # style sheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
+# list).
+# Note: Since the styling of scrollbars can currently not be overruled in
+# Webkit/Chromium, the styling will be left out of the default doxygen.css if
+# one or more extra stylesheets have been specified. So if scrollbar
+# customization is desired it has to be added explicitly. For an example see the
+# documentation.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
 HTML_EXTRA_STYLESHEET  = "@ELASTIX_DOXYGEN_DIR@/elastix.css"
@@ -1241,9 +1411,22 @@ HTML_EXTRA_STYLESHEET  = "@ELASTIX_DOXYGEN_DIR@/elastix.css"
 
 HTML_EXTRA_FILES       =
 
+# The HTML_COLORSTYLE tag can be used to specify if the generated HTML output
+# should be rendered with a dark or light theme.
+# Possible values are: LIGHT always generates light mode output, DARK always
+# generates dark mode output, AUTO_LIGHT automatically sets the mode according
+# to the user preference, uses light mode if no preference is set (the default),
+# AUTO_DARK automatically sets the mode according to the user preference, uses
+# dark mode if no preference is set and TOGGLE allows a user to switch between
+# light and dark mode via a button.
+# The default value is: AUTO_LIGHT.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE        = AUTO_LIGHT
+
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
 # will adjust the colors in the style sheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
+# this color. Hue is specified as an angle on a color-wheel, see
 # https://en.wikipedia.org/wiki/Hue for more information. For instance the value
 # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
 # purple, and 360 is red again.
@@ -1253,7 +1436,7 @@ HTML_EXTRA_FILES       =
 HTML_COLORSTYLE_HUE    = 220
 
 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
+# in the HTML output. For a value of 0 the output will use gray-scales only. A
 # value of 255 will produce the most vivid colors.
 # Minimum value: 0, maximum value: 255, default value: 100.
 # This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1271,20 +1454,11 @@ HTML_COLORSTYLE_SAT    = 100
 
 HTML_COLORSTYLE_GAMMA  = 80
 
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to YES can help to show when doxygen was last run and thus if the
-# documentation is up to date.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = YES
-
 # If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
 # documentation will contain a main index with vertical navigation menus that
-# are dynamically created via Javascript. If disabled, the navigation index will
+# are dynamically created via JavaScript. If disabled, the navigation index will
 # consists of multiple levels of tabs that are statically embedded in every HTML
-# page. Disable this option to support browsers that do not have Javascript,
+# page. Disable this option to support browsers that do not have JavaScript,
 # like the Qt help browser.
 # The default value is: YES.
 # This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1299,6 +1473,33 @@ HTML_DYNAMIC_MENUS     = YES
 
 HTML_DYNAMIC_SECTIONS  = NO
 
+# If the HTML_CODE_FOLDING tag is set to YES then classes and functions can be
+# dynamically folded and expanded in the generated HTML source code.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_CODE_FOLDING      = YES
+
+# If the HTML_COPY_CLIPBOARD tag is set to YES then doxygen will show an icon in
+# the top right corner of code and text fragments that allows the user to copy
+# its content to the clipboard. Note this only works if supported by the browser
+# and the web page is served via a secure context (see:
+# https://www.w3.org/TR/secure-contexts/), i.e. using the https: or file:
+# protocol.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COPY_CLIPBOARD    = YES
+
+# Doxygen stores a couple of settings persistently in the browser (via e.g.
+# cookies). By default these settings apply to all HTML pages generated by
+# doxygen across all projects. The HTML_PROJECT_COOKIE tag can be used to store
+# the settings under a project specific key, such that the user preferences will
+# be stored separately.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_PROJECT_COOKIE    =
+
 # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
 # shown in the various tree structured indices initially; the user can expand
 # and collapse entries dynamically later on. Doxygen will expand the tree to
@@ -1314,10 +1515,11 @@ HTML_INDEX_NUM_ENTRIES = 100
 
 # If the GENERATE_DOCSET tag is set to YES, additional index files will be
 # generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: https://developer.apple.com/xcode/), introduced with OSX
-# 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
+# environment (see:
+# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To
+# create a documentation set, doxygen will generate a Makefile in the HTML
+# output directory. Running make will produce the docset in that directory and
+# running make install will install the docset in
 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
 # startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy
 # genXcode/_index.html for more information.
@@ -1334,6 +1536,13 @@ GENERATE_DOCSET        = NO
 
 DOCSET_FEEDNAME        = "Doxygen generated docs"
 
+# This tag determines the URL of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDURL         =
+
 # This tag specifies a string that should uniquely identify the documentation
 # set bundle. This should be a reverse domain-name style string, e.g.
 # com.mycompany.MyDocSet. Doxygen will append .docset to the name.
@@ -1359,8 +1568,12 @@ DOCSET_PUBLISHER_NAME  = Publisher
 # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
 # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
 # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
+# on Windows. In the beginning of 2021 Microsoft took the original page, with
+# a.o. the download links, offline the HTML help workshop was already many years
+# in maintenance mode). You can download the HTML help workshop from the web
+# archives at Installation executable (see:
+# http://web.archive.org/web/20160201063255/http://download.microsoft.com/downlo
+# ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe).
 #
 # The HTML Help Workshop contains a compiler that can convert all HTML output
 # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
@@ -1390,7 +1603,7 @@ CHM_FILE               =
 HHC_LOCATION           =
 
 # The GENERATE_CHI flag controls if a separate .chi index file is generated
-# (YES) or that it should be included in the master .chm file (NO).
+# (YES) or that it should be included in the main .chm file (NO).
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
 
@@ -1417,6 +1630,16 @@ BINARY_TOC             = NO
 
 TOC_EXPAND             = NO
 
+# The SITEMAP_URL tag is used to specify the full URL of the place where the
+# generated documentation will be placed on the server by the user during the
+# deployment of the documentation. The generated sitemap is called sitemap.xml
+# and placed on the directory specified by HTML_OUTPUT. In case no SITEMAP_URL
+# is specified no sitemap is generated. For information about the sitemap
+# protocol see https://www.sitemaps.org
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SITEMAP_URL            =
+
 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
 # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
 # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
@@ -1435,7 +1658,8 @@ QCH_FILE               =
 
 # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
 # Project output. For more information please see Qt Help Project / Namespace
-# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
+# (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
 # The default value is: org.doxygen.Project.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1443,8 +1667,8 @@ QHP_NAMESPACE          = org.doxygen.Project
 
 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
 # Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-
-# folders).
+# Folders (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders).
 # The default value is: doc.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
@@ -1452,16 +1676,16 @@ QHP_VIRTUAL_FOLDER     = doc
 
 # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
 # filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_NAME   =
 
 # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
 # custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHP_CUST_FILTER_ATTRS  =
@@ -1473,9 +1697,9 @@ QHP_CUST_FILTER_ATTRS  =
 
 QHP_SECT_FILTER_ATTRS  =
 
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
+# The QHG_LOCATION tag can be used to specify the location (absolute path
+# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to
+# run qhelpgenerator on the generated .qhp file.
 # This tag requires that the tag GENERATE_QHP is set to YES.
 
 QHG_LOCATION           =
@@ -1518,16 +1742,28 @@ DISABLE_INDEX          = YES
 # to work a browser that supports JavaScript, DHTML, CSS and frames is required
 # (i.e. any modern browser). Windows users are probably better off using the
 # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
+# further fine tune the look of the index (see "Fine-tuning the output"). As an
+# example, the default style sheet generated by doxygen has an example that
+# shows how to put an image at the root of the tree instead of the PROJECT_NAME.
+# Since the tree basically has the same information as the tab index, you could
+# consider setting DISABLE_INDEX to YES when enabling this option.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
 GENERATE_TREEVIEW      = NO
 
+# When both GENERATE_TREEVIEW and DISABLE_INDEX are set to YES, then the
+# FULL_SIDEBAR option determines if the side bar is limited to only the treeview
+# area (value NO) or if it should extend to the full height of the window (value
+# YES). Setting this to YES gives a layout similar to
+# https://docs.readthedocs.io with more room for contents, but less room for the
+# project logo, title, and description. If either GENERATE_TREEVIEW or
+# DISABLE_INDEX is set to NO, this option has no effect.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FULL_SIDEBAR           = NO
+
 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
 # doxygen will group on one line in the generated HTML documentation.
 #
@@ -1552,6 +1788,24 @@ TREEVIEW_WIDTH         = 250
 
 EXT_LINKS_IN_WINDOW    = NO
 
+# If the OBFUSCATE_EMAILS tag is set to YES, doxygen will obfuscate email
+# addresses.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+OBFUSCATE_EMAILS       = YES
+
+# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg
+# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see
+# https://inkscape.org) to generate formulas as SVG images instead of PNGs for
+# the HTML output. These images will generally look nicer at scaled resolutions.
+# Possible values are: png (the default) and svg (looks nicer but requires the
+# pdf2svg or inkscape tool).
+# The default value is: png.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FORMULA_FORMAT    = png
+
 # Use this tag to change the font size of LaTeX formulas included as images in
 # the HTML documentation. When you change the font size after a successful
 # doxygen run you need to manually remove any form_*.png images from the HTML
@@ -1561,19 +1815,14 @@ EXT_LINKS_IN_WINDOW    = NO
 
 FORMULA_FONTSIZE       = 10
 
-# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
+# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands
+# to create new LaTeX commands to be used in formulas as building blocks. See
+# the section "Including formulas" for details.
 
-FORMULA_TRANSPARENT    = YES
+FORMULA_MACROFILE      =
 
 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# https://www.mathjax.org) which uses client side Javascript for the rendering
+# https://www.mathjax.org) which uses client side JavaScript for the rendering
 # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
 # installed or if you want to formulas look prettier in the HTML output. When
 # enabled you may also need to install MathJax separately and configure the path
@@ -1583,11 +1832,29 @@ FORMULA_TRANSPARENT    = YES
 
 USE_MATHJAX            = NO
 
+# With MATHJAX_VERSION it is possible to specify the MathJax version to be used.
+# Note that the different versions of MathJax have different requirements with
+# regards to the different settings, so it is possible that also other MathJax
+# settings have to be changed when switching between the different MathJax
+# versions.
+# Possible values are: MathJax_2 and MathJax_3.
+# The default value is: MathJax_2.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_VERSION        = MathJax_2
+
 # When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
+# the MathJax output. For more details about the output format see MathJax
+# version 2 (see:
+# http://docs.mathjax.org/en/v2.7-latest/output.html) and MathJax version 3
+# (see:
+# http://docs.mathjax.org/en/latest/web/components/output.html).
 # Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
+# compatibility. This is the name for Mathjax version 2, for MathJax version 3
+# this will be translated into chtml), NativeMML (i.e. MathML. Only supported
+# for MathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This
+# is the name for Mathjax version 3, for MathJax version 2 this will be
+# translated into HTML-CSS) and SVG.
 # The default value is: HTML-CSS.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
@@ -1600,22 +1867,29 @@ MATHJAX_FORMAT         = HTML-CSS
 # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
 # Content Delivery Network so you can quickly see the result without installing
 # MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from https://www.mathjax.org before deployment.
-# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/.
+# MathJax from https://www.mathjax.org before deployment. The default value is:
+# - in case of MathJax version 2: https://cdn.jsdelivr.net/npm/mathjax@2
+# - in case of MathJax version 3: https://cdn.jsdelivr.net/npm/mathjax@3
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
 MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
 
 # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
 # extension names that should be enabled during MathJax rendering. For example
+# for MathJax version 2 (see
+# https://docs.mathjax.org/en/v2.7-latest/tex.html#tex-and-latex-extensions):
 # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# For example for MathJax version 3 (see
+# http://docs.mathjax.org/en/latest/input/tex/extensions/index.html):
+# MATHJAX_EXTENSIONS = ams
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
 MATHJAX_EXTENSIONS     =
 
 # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
 # of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# (see:
+# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an
 # example see the documentation.
 # This tag requires that the tag USE_MATHJAX is set to YES.
 
@@ -1643,7 +1917,7 @@ MATHJAX_CODEFILE       =
 SEARCHENGINE           = NO
 
 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
+# implemented using a web server instead of a web client using JavaScript. There
 # are two flavors of web server based searching depending on the EXTERNAL_SEARCH
 # setting. When disabled, doxygen will generate a PHP script for searching and
 # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
@@ -1662,7 +1936,8 @@ SERVER_BASED_SEARCH    = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/).
+# Xapian (see:
+# https://xapian.org/).
 #
 # See the section "External Indexing and Searching" for details.
 # The default value is: NO.
@@ -1675,8 +1950,9 @@ EXTERNAL_SEARCH        = NO
 #
 # Doxygen ships with an example indexer (doxyindexer) and search engine
 # (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: https://xapian.org/). See the section "External Indexing and
-# Searching" for details.
+# Xapian (see:
+# https://xapian.org/). See the section "External Indexing and Searching" for
+# details.
 # This tag requires that the tag SEARCHENGINE is set to YES.
 
 SEARCHENGINE_URL       =
@@ -1785,29 +2061,31 @@ PAPER_TYPE             = a4
 
 EXTRA_PACKAGES         =
 
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
+# The LATEX_HEADER tag can be used to specify a user-defined LaTeX header for
+# the generated LaTeX document. The header should contain everything until the
+# first chapter. If it is left blank doxygen will generate a standard header. It
+# is highly recommended to start with a default header using
+# doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty
+# and then modify the file new_header.tex. See also section "Doxygen usage" for
+# information on how to generate the default header that doxygen normally uses.
 #
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
-# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
-# string, for the replacement values of the other commands the user is referred
-# to HTML_HEADER.
+# Note: Only use a user-defined header if you know what you are doing!
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. The following
+# commands have a special meaning inside the header (and footer): For a
+# description of the possible markers and block names see the documentation.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
 LATEX_HEADER           =
 
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer. See
+# The LATEX_FOOTER tag can be used to specify a user-defined LaTeX footer for
+# the generated LaTeX document. The footer should contain everything after the
+# last chapter. If it is left blank doxygen will generate a standard footer. See
 # LATEX_HEADER for more information on how to generate a default footer and what
-# special commands can be used inside the footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
+# special commands can be used inside the footer. See also section "Doxygen
+# usage" for information on how to generate the default footer that doxygen
+# normally uses. Note: Only use a user-defined footer if you know what you are
+# doing!
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
 LATEX_FOOTER           =
@@ -1840,18 +2118,26 @@ LATEX_EXTRA_FILES      =
 
 PDF_HYPERLINKS         = NO
 
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES, to get a
-# higher quality PDF documentation.
+# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as
+# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX
+# files. Set this option to YES, to get a higher quality PDF documentation.
+#
+# See also section LATEX_CMD_NAME for selecting the engine.
 # The default value is: YES.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
 USE_PDFLATEX           = NO
 
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
+# The LATEX_BATCHMODE tag signals the behavior of LaTeX in case of an error.
+# Possible values are: NO same as ERROR_STOP, YES same as BATCH, BATCH In batch
+# mode nothing is printed on the terminal, errors are scrolled as if <return> is
+# hit at every error; missing files that TeX tries to input or request from
+# keyboard input (\read on a not open input stream) cause the job to abort,
+# NON_STOP In nonstop mode the diagnostic message will appear on the terminal,
+# but there is no possibility of user interaction just like in batch mode,
+# SCROLL In scroll mode, TeX will stop only for missing files to input or if
+# keyboard input is necessary and ERROR_STOP In errorstop mode, TeX will stop at
+# each error, asking for user intervention.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -1864,16 +2150,6 @@ LATEX_BATCHMODE        = NO
 
 LATEX_HIDE_INDICES     = NO
 
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
 # bibliography, e.g. plainnat, or ieeetr. See
 # https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
@@ -1882,14 +2158,6 @@ LATEX_SOURCE_CODE      = NO
 
 LATEX_BIB_STYLE        = plain
 
-# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_TIMESTAMP        = NO
-
 # The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute)
 # path from which the emoji images will be read. If a relative path is entered,
 # it will be relative to the LATEX_OUTPUT directory. If left blank the
@@ -1954,15 +2222,13 @@ RTF_STYLESHEET_FILE    =
 
 RTF_EXTENSIONS_FILE    =
 
-# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
-# with syntax highlighting in the RTF output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
+# The RTF_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the RTF_OUTPUT output directory.
+# Note that the files will be copied as-is; there are no commands or markers
+# available.
 # This tag requires that the tag GENERATE_RTF is set to YES.
 
-RTF_SOURCE_CODE        = NO
+RTF_EXTRA_FILES        =
 
 #---------------------------------------------------------------------------
 # Configuration options related to the man page output
@@ -2060,27 +2326,44 @@ GENERATE_DOCBOOK       = NO
 
 DOCBOOK_OUTPUT         = docbook
 
-# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
-# program listings (including syntax highlighting and cross-referencing
-# information) to the DOCBOOK output. Note that enabling this will significantly
-# increase the size of the DOCBOOK output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_PROGRAMLISTING = NO
-
 #---------------------------------------------------------------------------
 # Configuration options for the AutoGen Definitions output
 #---------------------------------------------------------------------------
 
 # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
-# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
+# AutoGen Definitions (see https://autogen.sourceforge.net/) file that captures
 # the structure of the code including all documentation. Note that this feature
 # is still experimental and incomplete at the moment.
 # The default value is: NO.
 
 GENERATE_AUTOGEN_DEF   = NO
 
+#---------------------------------------------------------------------------
+# Configuration options related to Sqlite3 output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_SQLITE3 tag is set to YES doxygen will generate a Sqlite3
+# database with symbols found by doxygen stored in tables.
+# The default value is: NO.
+
+GENERATE_SQLITE3       = NO
+
+# The SQLITE3_OUTPUT tag is used to specify where the Sqlite3 database will be
+# put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put
+# in front of it.
+# The default directory is: sqlite3.
+# This tag requires that the tag GENERATE_SQLITE3 is set to YES.
+
+SQLITE3_OUTPUT         = sqlite3
+
+# The SQLITE3_RECREATE_DB tag is set to YES, the existing doxygen_sqlite3.db
+# database file will be recreated with each doxygen run. If set to NO, doxygen
+# will warn if a database file is already found and not modify it.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_SQLITE3 is set to YES.
+
+SQLITE3_RECREATE_DB    = YES
+
 #---------------------------------------------------------------------------
 # Configuration options related to the Perl module output
 #---------------------------------------------------------------------------
@@ -2155,7 +2438,8 @@ SEARCH_INCLUDES        = NO
 
 # The INCLUDE_PATH tag can be used to specify one or more directories that
 # contain include files that are not input files but should be processed by the
-# preprocessor.
+# preprocessor. Note that the INCLUDE_PATH is not recursive, so the setting of
+# RECURSIVE has no effect here.
 # This tag requires that the tag SEARCH_INCLUDES is set to YES.
 
 INCLUDE_PATH           =
@@ -2268,15 +2552,15 @@ TAGFILES               =
 
 GENERATE_TAGFILE       =
 
-# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
-# the class index. If set to NO, only the inherited external classes will be
-# listed.
+# If the ALLEXTERNALS tag is set to YES, all external classes and namespaces
+# will be listed in the class and namespace index. If set to NO, only the
+# inherited external classes will be listed.
 # The default value is: NO.
 
 ALLEXTERNALS           = NO
 
 # If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will be
+# in the topic index. If set to NO, only the current project's groups will be
 # listed.
 # The default value is: YES.
 
@@ -2290,25 +2574,9 @@ EXTERNAL_GROUPS        = NO
 EXTERNAL_PAGES         = YES
 
 #---------------------------------------------------------------------------
-# Configuration options related to the dot tool
+# Configuration options related to diagram generator tools
 #---------------------------------------------------------------------------
 
-# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = YES
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
 # If set to YES the inheritance and collaboration graphs will hide inheritance
 # and usage relations if the target is undocumented or is not a class.
 # The default value is: YES.
@@ -2317,7 +2585,7 @@ HIDE_UNDOC_RELATIONS   = NO
 
 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
 # available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# https://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
 # Bell Labs. The other options in this section have no effect if this option is
 # set to NO
 # The default value is: NO.
@@ -2334,49 +2602,77 @@ HAVE_DOT               = YES
 
 DOT_NUM_THREADS        = 0
 
-# When you want a differently looking font in the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
+# DOT_COMMON_ATTR is common attributes for nodes, edges and labels of
+# subgraphs. When you want a differently looking font in the dot files that
+# doxygen generates you can specify fontname, fontcolor and fontsize attributes.
+# For details please see <a href=https://graphviz.org/doc/info/attrs.html>Node,
+# Edge and Graph Attributes specification</a> You need to make sure dot is able
+# to find the font, which can be done by putting it in a standard location or by
+# setting the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
+# directory containing the font. Default graphviz fontsize is 14.
+# The default value is: fontname=Helvetica,fontsize=10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_COMMON_ATTR        = "fontname=Helvetica,fontsize=10"
+
+# DOT_EDGE_ATTR is concatenated with DOT_COMMON_ATTR. For elegant style you can
+# add 'arrowhead=open, arrowtail=open, arrowsize=0.5'. <a
+# href=https://graphviz.org/doc/info/arrows.html>Complete documentation about
+# arrows shapes.</a>
+# The default value is: labelfontname=Helvetica,labelfontsize=10.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
-DOT_FONTNAME           = Helvetica
+DOT_EDGE_ATTR          = "labelfontname=Helvetica,labelfontsize=10"
 
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
+# DOT_NODE_ATTR is concatenated with DOT_COMMON_ATTR. For view without boxes
+# around nodes set 'shape=plain' or 'shape=plaintext' <a
+# href=https://www.graphviz.org/doc/info/shapes.html>Shapes specification</a>
+# The default value is: shape=box,height=0.2,width=0.4.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
-DOT_FONTSIZE           = 10
+DOT_NODE_ATTR          = "shape=box,height=0.2,width=0.4"
 
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
+# You can set the path where dot can find font specified with fontname in
+# DOT_COMMON_ATTR and others dot attributes.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
 DOT_FONTPATH           =
 
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# If the CLASS_GRAPH tag is set to YES or GRAPH or BUILTIN then doxygen will
+# generate a graph for each documented class showing the direct and indirect
+# inheritance relations. In case the CLASS_GRAPH tag is set to YES or GRAPH and
+# HAVE_DOT is enabled as well, then dot will be used to draw the graph. In case
+# the CLASS_GRAPH tag is set to YES and HAVE_DOT is disabled or if the
+# CLASS_GRAPH tag is set to BUILTIN, then the built-in generator will be used.
+# If the CLASS_GRAPH tag is set to TEXT the direct and indirect inheritance
+# relations will be shown as texts / links. Explicit enabling an inheritance
+# graph or choosing a different representation for an inheritance graph of a
+# specific class, can be accomplished by means of the command \inheritancegraph.
+# Disabling an inheritance graph can be accomplished by means of the command
+# \hideinheritancegraph.
+# Possible values are: NO, YES, TEXT, GRAPH and BUILTIN.
 # The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
 
 CLASS_GRAPH            = YES
 
 # If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
 # graph for each documented class showing the direct and indirect implementation
 # dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
+# class with other documented classes. Explicit enabling a collaboration graph,
+# when COLLABORATION_GRAPH is set to NO, can be accomplished by means of the
+# command \collaborationgraph. Disabling a collaboration graph can be
+# accomplished by means of the command \hidecollaborationgraph.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
 COLLABORATION_GRAPH    = NO
 
 # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
+# groups, showing the direct groups dependencies. Explicit enabling a group
+# dependency graph, when GROUP_GRAPHS is set to NO, can be accomplished by means
+# of the command \groupgraph. Disabling a directory graph can be accomplished by
+# means of the command \hidegroupgraph. See also the chapter Grouping in the
+# manual.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2399,10 +2695,32 @@ UML_LOOK               = NO
 # but if the number exceeds 15, the total amount of fields shown is limited to
 # 10.
 # Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
+# This tag requires that the tag UML_LOOK is set to YES.
 
 UML_LIMIT_NUM_FIELDS   = 10
 
+# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and
+# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS
+# tag is set to YES, doxygen will add type and arguments for attributes and
+# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen
+# will not generate fields with class member information in the UML graphs. The
+# class diagrams will look similar to the default class diagrams but using UML
+# notation for the relationships.
+# Possible values are: NO, YES and NONE.
+# The default value is: NO.
+# This tag requires that the tag UML_LOOK is set to YES.
+
+DOT_UML_DETAILS        = NO
+
+# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters
+# to display on a single line. If the actual line length exceeds this threshold
+# significantly it will be wrapped across multiple lines. Some heuristics are
+# applied to avoid ugly line breaks.
+# Minimum value: 0, maximum value: 1000, default value: 17.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_WRAP_THRESHOLD     = 17
+
 # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
 # collaboration graphs will show the relations between templates and their
 # instances.
@@ -2414,7 +2732,9 @@ TEMPLATE_RELATIONS     = NO
 # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
 # YES then doxygen will generate a graph for each documented file showing the
 # direct and indirect include dependencies of the file with other documented
-# files.
+# files. Explicit enabling an include graph, when INCLUDE_GRAPH is is set to NO,
+# can be accomplished by means of the command \includegraph. Disabling an
+# include graph can be accomplished by means of the command \hideincludegraph.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2423,7 +2743,10 @@ INCLUDE_GRAPH          = YES
 # If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
 # set to YES then doxygen will generate a graph for each documented file showing
 # the direct and indirect include dependencies of the file with other documented
-# files.
+# files. Explicit enabling an included by graph, when INCLUDED_BY_GRAPH is set
+# to NO, can be accomplished by means of the command \includedbygraph. Disabling
+# an included by graph can be accomplished by means of the command
+# \hideincludedbygraph.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2463,16 +2786,26 @@ GRAPHICAL_HIERARCHY    = YES
 # If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
 # dependencies a directory has on other directories in a graphical way. The
 # dependency relations are determined by the #include relations between the
-# files in the directories.
+# files in the directories. Explicit enabling a directory graph, when
+# DIRECTORY_GRAPH is set to NO, can be accomplished by means of the command
+# \directorygraph. Disabling a directory graph can be accomplished by means of
+# the command \hidedirectorygraph.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
 DIRECTORY_GRAPH        = YES
 
+# The DIR_GRAPH_MAX_DEPTH tag can be used to limit the maximum number of levels
+# of child directories generated in directory dependency graphs by dot.
+# Minimum value: 1, maximum value: 25, default value: 1.
+# This tag requires that the tag DIRECTORY_GRAPH is set to YES.
+
+DIR_GRAPH_MAX_DEPTH    = 1
+
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
 # generated by dot. For an explanation of the image formats see the section
 # output formats in the documentation of the dot tool (Graphviz (see:
-# http://www.graphviz.org/)).
+# https://www.graphviz.org/)).
 # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
 # to make the SVG files visible in IE 9+ (other browsers do not have this
 # requirement).
@@ -2500,7 +2833,7 @@ INTERACTIVE_SVG        = NO
 # found. If left blank, it is assumed the dot tool can be found in the path.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
-DOT_PATH               = ""
+DOT_PATH               =
 
 # The DOTFILE_DIRS tag can be used to specify one or more directories that
 # contain dot files that are included in the documentation (see the \dotfile
@@ -2509,11 +2842,12 @@ DOT_PATH               = ""
 
 DOTFILE_DIRS           =
 
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
 
-MSCFILE_DIRS           =
+DIA_PATH               =
 
 # The DIAFILE_DIRS tag can be used to specify one or more directories that
 # contain dia files that are included in the documentation (see the \diafile
@@ -2522,10 +2856,10 @@ MSCFILE_DIRS           =
 DIAFILE_DIRS           =
 
 # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
-# path where java can find the plantuml.jar file. If left blank, it is assumed
-# PlantUML is not used or called during a preprocessing step. Doxygen will
-# generate a warning when it encounters a \startuml command in this case and
-# will not generate output for the diagram.
+# path where java can find the plantuml.jar file or to the filename of jar file
+# to be used. If left blank, it is assumed PlantUML is not used or called during
+# a preprocessing step. Doxygen will generate a warning when it encounters a
+# \startuml command in this case and will not generate output for the diagram.
 
 PLANTUML_JAR_PATH      =
 
@@ -2542,7 +2876,7 @@ PLANTUML_INCLUDE_PATH  =
 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
 # that will be shown in the graph. If the number of nodes in a graph becomes
 # larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
+# by representing a node as a red box. Note that if the number of direct
 # children of the root node in a graph is already larger than
 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
 # the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
@@ -2563,18 +2897,6 @@ DOT_GRAPH_MAX_NODES    = 50
 
 MAX_DOT_GRAPH_DEPTH    = 1000
 
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
 # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
 # files in one run (i.e. multiple -o and -T options on the command line). This
 # makes dot run faster, but since only newer versions of dot (>1.8.10) support
@@ -2587,14 +2909,34 @@ DOT_MULTI_TARGETS      = NO
 # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
 # explaining the meaning of the various boxes and arrows in the dot generated
 # graphs.
+# Note: This tag requires that UML_LOOK isn't set, i.e. the doxygen internal
+# graphical representation for inheritance and collaboration diagrams is used.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
 GENERATE_LEGEND        = YES
 
-# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate
 # files that are used to generate the various graphs.
+#
+# Note: This setting is not only used for dot files but also for msc temporary
+# files.
 # The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
 
 DOT_CLEANUP            = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. If the MSCGEN_TOOL tag is left empty (the default), then doxygen will
+# use a built-in version of mscgen tool to produce the charts. Alternatively,
+# the MSCGEN_TOOL tag can also specify the name an external tool. For instance,
+# specifying prog as the value, doxygen will call the tool as prog -T
+# <outfile_format> -o <outputfile> <inputfile>. The external tool should support
+# output file formats "png", "eps", "svg", and "ismap".
+
+MSCGEN_TOOL            =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =