Timer table configurations

[TbsJah]

Is there a possibility that the time tables are also retrieved and editable?

` // ---- Timer table configurations ----

    // Activated timer table for heating operation.
    // Possible values: 0=week (monday-sunday), 1=5+2 (monday-friday), 2=days (mo, tue, ...)
    'heatingOperationTimerTableSelected': heatpumpParameters[222],
    'heatingOperationTimerTableSelectedString': utils.createTimerTableTypeString(heatpumpParameters[222]), // string representation
    // heating operation table 0: week
    'heatingOperationTimerTableWeek': utils.createTimerTable(heatpumpParameters, 223, 3), // 223..528
    // heating operation table 1: 5+2
    'heatingOperationTimerTable52MonFri': utils.createTimerTable(heatpumpParameters, 229, 3), // 229..234
    'heatingOperationTimerTable52SatSun': utils.createTimerTable(heatpumpParameters, 235, 3), // 235..240
    // heating operation table 2: day
    'heatingOperationTimerTableDaySunday': utils.createTimerTable(heatpumpParameters, 241, 3), // 241..246
    'heatingOperationTimerTableDayMonday': utils.createTimerTable(heatpumpParameters, 247, 3), // 247..252
    'heatingOperationTimerTableDayTuesday': utils.createTimerTable(heatpumpParameters, 253, 3), // 253..258
    'heatingOperationTimerTableDayWednesday': utils.createTimerTable(heatpumpParameters, 259, 3), // 259..264
    'heatingOperationTimerTableDayThursday': utils.createTimerTable(heatpumpParameters, 265, 3), // 265..270
    'heatingOperationTimerTableDayFriday': utils.createTimerTable(heatpumpParameters, 271, 3), // 271..276
    'heatingOperationTimerTableDaySaturday': utils.createTimerTable(heatpumpParameters, 277, 3), // 277..282

    // Activated timer table for hot water operation.
    // Possible values: 0=week (monday-sunday), 1=5+2 (monday-friday), 2=days (mo, tue, ...)
    'hotWaterOperationTimerTableSelected': heatpumpParameters[405],
    'hotWaterOperationTimerTableSelectedString': utils.createTimerTableTypeString(heatpumpParameters[405]), // string representation

    // Important: hot water operation table specifies operation in inverse logic. Therefore swap the on/off times.
    // hot water operation table 0: week.
    'hotWaterOperationTimerTableWeek': utils.createTimerTable(heatpumpParameters, 406, 5, true), // 406..415
    // hot water operation table 1: 5+2
    'hotWaterOperationTimerTable52MonFri': utils.createTimerTable(heatpumpParameters, 416, 5, true), // 416..425
    'hotWaterOperationTimerTable52SatSun': utils.createTimerTable(heatpumpParameters, 426, 5, true), // 426..435
    // hot water operation table 2: day
    'hotWaterOperationTimerTableDaySunday': utils.createTimerTable(heatpumpParameters, 436, 5, true), // 436..445
    'hotWaterOperationTimerTableDayMonday': utils.createTimerTable(heatpumpParameters, 446, 5, true), // 446..455
    'hotWaterOperationTimerTableDayTuesday': utils.createTimerTable(heatpumpParameters, 456, 5, true), // 456..465
    'hotWaterOperationTimerTableDayWednesday': utils.createTimerTable(heatpumpParameters, 466, 5, true), // 466..475
    'hotWaterOperationTimerTableDayThursday': utils.createTimerTable(heatpumpParameters, 476, 5, true), // 476..485
    'hotWaterOperationTimerTableDayFriday': utils.createTimerTable(heatpumpParameters, 486, 5, true), // 486..495
    'hotWaterOperationTimerTableDaySaturday': utils.createTimerTable(heatpumpParameters, 496, 5, true), // 496..505

    // Activated timer table for hot water circulation pump.
    // Possible values: 0=week (monday-sunday), 1=5+2 (monday-friday), 2=days (mo, tue, ...)
    'hotWaterCircPumpTimerTableSelected': heatpumpParameters[506],
    'hotWaterCircPumpTimerTableSelectedString': utils.createTimerTableTypeString(heatpumpParameters[506]), // string representation
    // hot water circulation pump table 0: week
    'hotWaterCircPumpTimerTableWeek': utils.createTimerTable(heatpumpParameters, 507, 5), // 507..516
    // hot water circulation pump table 1: 5+2
    'hotWaterCircPumpTimerTable52MonFri': utils.createTimerTable(heatpumpParameters, 517, 5), // 517..526
    'hotWaterCircPumpTimerTable52SatSun': utils.createTimerTable(heatpumpParameters, 527, 5), // 527..536
    // hot water circulation pump table 2: day
    'hotWaterCircPumpTimerTableDaySunday': utils.createTimerTable(heatpumpParameters, 537, 5), // 537..546
    'hotWaterCircPumpTimerTableDayMonday': utils.createTimerTable(heatpumpParameters, 547, 5), // 547..556
    'hotWaterCircPumpTimerTableDayTuesday': utils.createTimerTable(heatpumpParameters, 557, 5), // 557..566
    'hotWaterCircPumpTimerTableDayWednesday': utils.createTimerTable(heatpumpParameters, 567, 5), // 567..576
    'hotWaterCircPumpTimerTableDayThursday': utils.createTimerTable(heatpumpParameters, 577, 5), // 577..586
    'hotWaterCircPumpTimerTableDayFriday': utils.createTimerTable(heatpumpParameters, 587, 5), // 587..596
    'hotWaterCircPumpTimerTableDaySaturday': utils.createTimerTable(heatpumpParameters, 597, 5), // 597..606

    'hotWaterCircPumpOnTime': heatpumpParameters[697], // Time in minutes the circ pump is turned on within one cycle.
    'hotWaterCircPumpOffTime': heatpumpParameters[698] // Time in minutes the circ pump is turned off within one cycle.`

[derelvis]

That would be really, really awesome!! If we can support in any way, please let us know.

[derelvis]

I cloned the repo and fiddled around a little bit. So it seems I made some progress. I can see the datapoints now in objects and the correct values from my pump in the overview. But the data type is not yet correct when I open it. Looks like object or json. Could not yet find out what to set or if it even needs to be converted.

Already tried out some different types and things from other adapters, not solved yet:

    heatingOperationTimerTableWeek: {
	type: 'object',
		common: {
			name: 'heating Operation Timer Table Week',
			type: 'json',
			role: 'value',
			read: true,
			write: true,
			desc: 'heating Operation Timer Table Week',
		},
},
    hotWaterOperationTimerTableWeek: {
	type: 'json',
		common: {
			name: 'hotWater Operation Timer Table Week',
			type: 'string',
			role: 'value',
			read: true,
			write: true,
			desc: 'hotWater Operation Timer Table Week',
		},
},
    hotWaterCircPumpTimerTableWeek: [
		{
			_id: 'hotWaterCircPumpTimerTableWeek',
			type: 'state',
			common: {
				name: 'hotWaterCircPumpTimerTableWeek Json',
				type: 'string',
				role: 'value',
				read: true,
				write: true,
				desc: 'set hotWaterCircPumpTimerTableWeek with a json',
			},
			native: {},
		},
	],

Maybe someone has some ideas or even knows the solution. It's the first time I try to do something like this :D
Until now it is only a readonly datapoint, what's fine for testing.