Replies: 1 comment 2 replies
-
|
yes, just add to an available GPIO, set the GPIO in EMS-ESP Setting's and it'll be automatically discovered. Don't forget to add a resistor. |
Beta Was this translation helpful? Give feedback.
-
|
Hello, "add an available GPIO, set the GPIO in the EMS-ESP settings" that's exactly what I tried. Without success. Is there a specific GPIO? Or, where in the EMS-ESP will I find the sensor? |
Beta Was this translation helpful? Give feedback.
-
|
Look at the manufacture's recommendations for your ESP32 (az delivery?). Generally any input GPIO will work. There are listed on https://emsesp.github.io/docs/Configuring/#network-settings-network-network-settings The Sensor will show in the Sensor tab under the Dashboard. You can see an example at https://ems-esp.derbyshire.nl/dashboard/sensors |
Beta Was this translation helpful? Give feedback.
-
Hello,
I use EMS-ESP with the "BBQ interface card V3.1". And an "az delivery esp32 wroom 32" module.
Works great in conjunction with Home Assistant.
Is it possible to connect a DS18B20 to the ESP32 module and display it in EMS-ESP? And then send the “room temperature” to Home Assistant?
Thanks in advance.
Beta Was this translation helpful? Give feedback.
All reactions