We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Example when we get the error: In this case the water in the feed is set to 0, and we will only have gas and oil in inlet separator.
feedFluid = {'ComponentName': ['water', 'MEG', "methane", "ethane", "propane","i-butane", "n-butane","i-pentane","n-pentane", "C6", "C7", "C8", "C9", "C10"], 'MolarComposition[-]': [0.0, 0.0, 80.0, 6.0, 2.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 0.01, 0.05, 1.01], 'MolarMass[kg/mol]': [None,None, None,None,None,None, None,None,None,0.091, 0.110, 0.13, 0.15, 0.25], 'RelativeDensity[-]': [None,None, None,None,None,None, None,None,None, 0.7, 0.78, 0.8, 0.82, 0.83] }
reservoirFluiddf = pd.DataFrame(feedFluid) fluid7 = fluid_df(reservoirFluiddf).autoSelectModel() fluid7.setMultiPhaseCheck(True) glycolFluid = fluid7.clone() glycolFluid.setMolarComposition([0.0, 1.0, 0.0, 0.0,0.0, 0.0,0.0, 0.0,0.0, 0.0,0.0, 0.0,0.0,0.0]) clearProcess() feedStream = stream(fluid7) feedStream.setFlowRate(self.feedFlowRateTrain1, 'kg/hr') feedStream.setPressure(self.feedPressure, 'barg') feedStream.setTemperature(self.feedTemperature, 'C') glycolFeedStream = stream(glycolFluid) glycolFeedStream.setFlowRate(self.glycolFlow, 'kg/hr') glycolFeedStream.setTemperature(self.feedTemperature, 'C') glycolFeedStream.setPressure(self.feedPressure, 'barg') slugCatcher = separator3phase(feedStream) saturatedGasFromSlugCatcher = saturator(slugCatcher.getGasOutStream(), 'water saturator') valve1 = valve(saturatedGasFromSlugCatcher.getOutStream()) valve1.setOutletPressure(self.sep1Pressure) sep1 = separator3phase(valve1.getOutStream()) cooler1 = cooler(sep1.getGasOutStream()) cooler1.setOutTemperature(self.cooler1T, 'C') sep2 = separator3phase(cooler1.getOutStream()) mixer1 = mixer() mixer1.addStream(sep2.getGasOutStream()) mixer1.addStream(glycolFeedStream) expander1 = expander(mixer1.getOutStream(), self.expOutPressure) sep3 = separator3phase(expander1.getOutStream()) gasToExport = stream(sep3.getGasOutStream()) runProcess()
The text was updated successfully, but these errors were encountered:
EvenSol
No branches or pull requests
Example when we get the error:
In this case the water in the feed is set to 0, and we will only have gas and oil in inlet separator.
feedFluid = {'ComponentName': ['water', 'MEG', "methane", "ethane", "propane","i-butane", "n-butane","i-pentane","n-pentane", "C6", "C7", "C8", "C9", "C10"],
'MolarComposition[-]': [0.0, 0.0, 80.0, 6.0, 2.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 0.01, 0.05, 1.01],
'MolarMass[kg/mol]': [None,None, None,None,None,None, None,None,None,0.091, 0.110, 0.13, 0.15, 0.25],
'RelativeDensity[-]': [None,None, None,None,None,None, None,None,None, 0.7, 0.78, 0.8, 0.82, 0.83]
}
The text was updated successfully, but these errors were encountered: