-
Notifications
You must be signed in to change notification settings - Fork 91
/
NORway_README.txt
175 lines (133 loc) · 6.37 KB
/
NORway_README.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
NORway v0.7 - Teensy++ 2.0 NOR and Dual NAND flasher
Disclaimer
----------
WARNING: Use this software at your own risk. The author accepts no
responsibility for the consequences of your use of this software.
This project has been ported for the Teensy++ 2.0 from the original NOR flasher tool
("noralizer" by Hector Martin "marcan" <hector@marcansoft.com>) that was used to flash
AsbestOS onto the demo PS3 at 27C3, and for experimentation.
Contents:
\teensyNOR\NORway.avrsln - Source code for the Teensy++ 2.0 (AVR Studio 5.0)
\teensyNOR\default\NORway.hex - Compiled hex-file for the Teensy++ 2.0 (AT90USB1286)
\teensyNAND\NANDway.atsln - Source code for the Teensy++ 2.0 (AVR Studio 6.0)
\teensyNAND\default\NANDway.hex - Compiled hex-file for the Teensy++ 2.0 (AT90USB1286)
\hwinstall\install-*.jpg - Some pics of how I've mounted the Teensy (CECH-2504A/B)
\hwinstall\nor_testpoints.png - Connection diagram of the NOR testpoints (CECH-2504A/B)
\hwinstall\teensy.jpg - Teensy connection points (see chart below)
\serial_install.exe - Teensy serial drivers for Windows
\norpatch.exe - Small tool to verify content of NOR dump (recognizes any OFW),
replace ros0/ros1 with new core os (.NET 2.0 required)
\NORway.py - NOR PC Python client
\NANDway.py - NAND PC Python client
\changes.txt - Version history
\perf-test.txt - Performance tests for the different writing modes
\README.txt - This file
NOR Hardware connections (see "\hwinstall\nor_testpoints.png" + "\hwinstall\teensy.jpg"):
PS3 Teensy
A0-7 PF0-7
A8-15 PA0-7
A16-22 PB0-6
D0-7 PD0-7
D8-15 PC0-7
CE# PE0
OE# PE1
RESET# PE4
WE# PE5
RY/BY# PE6
TRISTATE# PE7
GND GND
NAND Hardware connections:
NAND Teensy - nand0 Teensy - nand1
* IO0-7 PF0-7 PC0-7
7 RY/BY# PB6 PD6
8 RE# PB1 PD1
9 CE# PB0 PD0
12 Vcc 3.3v - Vcc 3.3v - Vcc
13 GND GND GND
16 CLE PB2 PD2
17 ALE PB3 PD3
18 WE# PB5 PD5
19 WP# PB4 PD4
Tristate:
PS3 Teensy
TRISTATE PB7/PD7
--------------------------------------------
Powering option 1 (voltage regulator, Teensy powered by USB):
Install the 3.3V voltage regulator available at pjrc.com! 5V trace has to be cut and 3V pads have to be shorted!
Please refer to https://www.pjrc.com/teensy/3volt.html
DON'T CONNECT THE VCC SOLDER PADS TO ANYTHING!
--------------------------------------------
--------------------------------------------
Powering option 2 (external power, Teensy powered by console):
Connect Teensy's VCC solder pad to PS3's 3.3V supply (see connection diagram). 5V trace has to be cut and
3V pads have to be shorted!
Please refer to https://www.pjrc.com/teensy/3volt.html
DON'T INSTALL VOLTAGE REGULATOR!
--------------------------------------------
Connection diagrams for other boards can be found at:
http://ps3devwiki.com/index.php?title=Hardware_flashing
Prerequisites for Windows:
Python 2.7.2 (http://www.python.org/ftp/python/2.7.2/python-2.7.2.msi)
pyserial 2.5 (http://pypi.python.org/packages/any/p/pyserial/pyserial-2.5.win32.exe)
Usage:
Install Python + pyserial (see "Prerequisites for Windows"). Install drivers. Connect Teensy
directly to your PC (not an USB hub, might cause trouble). Flash Teensy with "\teensy\default\NORway.hex"
and reset it after completion. Start Windows' "Device Manager", expand the "Ports (COM & LPT)" node,
you should see something like "USB Serial (Communication Class, Abstract Control Model) (COM4)". This
tells you that "COM4" (or whatever shows up) is the COM port used by Teensy.
-Norway.py
* Flash Teensy with "\teensyNOR\default\NORway.hex"
At the command prompt enter "NORway.py" to display help.
Procedure to dump your flash:
- PS3 is turned off
- At the command prompt enter:
NORway.py <your com port>
- Turn on your PS3, it shouldn't boot
- At the command prompt enter:
NORway.py <your com port> dump flash.bin
- When dumping is finished enter:
NORway.py <your com port> release
- Power off your PS3 (disconnect Teensy if PS3 doesn't boot when restarted)
Dumping takes about 1 minute. A file "flash.bin" with a size of exactly 16 MB (16.777.216 bytes)
has been created in your current directory.
Writing a complete flash using the "write" command takes about 4:30 minutes.
-NANDway.py
* Flash Teensy with "\teensyNAND\default\NANDway.hex"
At the command prompt enter "NANDway.py" to display help.
first make sure that you are able to read the NAND's info. do this by using
the info command.
get information:
NANDway.py COMx NAND_ID info
dump:
NANDway.py COMx NAND_ID dump filename
write:
NANDway.py COMx NAND_ID write filename
NAND_ID is the id number of the NAND. it can be either 0 for NAND0 or 1 for
NAND1 on your motherboard.
Bad blocks (currently only PS3 is supported):
- Locate and print bad blocks in an input NAND dump file:
NANDWay.py badblocks Filename
- Remap the bad blocks of an input file to a new NAND given the new nand's dump (that is used to locate the bad blocks on the new NAND)
NANDWay.py remapbadblocks InputFile NewNand OutputFile
IMPORTANT:
Before you flash your PS3 with anything new, make sure that the content of your dump is correct
(use the supplied tool "norpatch.exe", it's able to recognize any OFW core os).
And keep your original dump in a safe place. You might need it.
Support thread:
http://www.ps3hax.net/showthread.php?t=25408
More information available at (thanks to eussNL and all contributors for maintaining this great wiki!):
http://ps3devwiki.com/wiki/Teensy_2.0%2B%2B
http://ps3devwiki.com/wiki/Hardware_flashing
It's tested on Win7 x86/x64, but should also work just fine on any other x86/x64 Windows >=XP. Basically
it should also work on Linux and OSX, but I didn't test. If you're running Linux/OSX, you probably know what to do. ;-)
Serial drivers are not required for Linux/OSX.
Thanks to "marcan" for the original implementation.
Thanks to "baileyscream" for his "Ultimate Fool Proof Guide: Ps3 Hardware Downgrading"!
http://www.ps3hax.net/showthread.php?t=39766
Thanks to "xanadu247" for his "GUIDE to self powering TEENSY 2.0++/ 360Clip (NOR)"!
http://www.ps3hax.net/showthread.php?t=78378
Thanks to "CrackMyDay" for code optimizations and his Samsung tutorial!
check this out if you run into troubles (last resort):
http://www.ps3hax.net/showthread.php?p=284070#post284070
Thanks to everyone else for contributing and beta testing!
-- judges (judges@eEcho.com)