From 59f4a75cc6b8eac27b2aafbdd923775b0d1a2f11 Mon Sep 17 00:00:00 2001 From: myst6re Date: Wed, 7 Aug 2024 23:14:54 +0200 Subject: [PATCH] Add zlib and lz4 inside the repo for windows builds --- CMakeLists.txt | 3 + lz4/include/lz4.h | 862 +++++++++ lz4/include/lz4frame.h | 702 +++++++ lz4/include/lz4hc.h | 413 +++++ lz4/lib/cmake/lz4/lz4Config.cmake | 26 + lz4/lib/cmake/lz4/lz4ConfigVersion.cmake | 70 + lz4/lib/cmake/lz4/lz4Targets-release.cmake | 29 + lz4/lib/cmake/lz4/lz4Targets.cmake | 101 ++ lz4/lib/pkgconfig/liblz4.pc | 14 + zlib/include/zconf.h | 536 ++++++ zlib/include/zlib.h | 1912 ++++++++++++++++++++ zlib/share/pkgconfig/zlib.pc | 13 + 12 files changed, 4681 insertions(+) create mode 100644 lz4/include/lz4.h create mode 100644 lz4/include/lz4frame.h create mode 100644 lz4/include/lz4hc.h create mode 100644 lz4/lib/cmake/lz4/lz4Config.cmake create mode 100644 lz4/lib/cmake/lz4/lz4ConfigVersion.cmake create mode 100644 lz4/lib/cmake/lz4/lz4Targets-release.cmake create mode 100644 lz4/lib/cmake/lz4/lz4Targets.cmake create mode 100644 lz4/lib/pkgconfig/liblz4.pc create mode 100644 zlib/include/zconf.h create mode 100644 zlib/include/zlib.h create mode 100644 zlib/share/pkgconfig/zlib.pc diff --git a/CMakeLists.txt b/CMakeLists.txt index 59c0c09..cd8fc66 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -43,6 +43,9 @@ set(CMAKE_CXX_STANDARD_REQUIRED ON) if (MSVC) add_compile_options(/W3) + set(lz4_DIR "${CMAKE_CURRENT_SOURCE_DIR}/lz4/lib/cmake/lz4") + set(ZLIB_INCLUDE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/zlib/include") + set(ZLIB_LIBRARY "${CMAKE_CURRENT_SOURCE_DIR}/zlib/lib/zlib.lib") else() add_compile_options(-Wall -Wextra -pedantic) endif() diff --git a/lz4/include/lz4.h b/lz4/include/lz4.h new file mode 100644 index 0000000..f7b255d --- /dev/null +++ b/lz4/include/lz4.h @@ -0,0 +1,862 @@ +/* + * LZ4 - Fast LZ compression algorithm + * Header File + * Copyright (C) 2011-2020, Yann Collet. + + BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php) + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above + copyright notice, this list of conditions and the following disclaimer + in the documentation and/or other materials provided with the + distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + You can contact the author at : + - LZ4 homepage : http://www.lz4.org + - LZ4 source repository : https://github.com/lz4/lz4 +*/ +#if defined (__cplusplus) +extern "C" { +#endif + +#ifndef LZ4_H_2983827168210 +#define LZ4_H_2983827168210 + +/* --- Dependency --- */ +#include /* size_t */ + + +/** + Introduction + + LZ4 is lossless compression algorithm, providing compression speed >500 MB/s per core, + scalable with multi-cores CPU. It features an extremely fast decoder, with speed in + multiple GB/s per core, typically reaching RAM speed limits on multi-core systems. + + The LZ4 compression library provides in-memory compression and decompression functions. + It gives full buffer control to user. + Compression can be done in: + - a single step (described as Simple Functions) + - a single step, reusing a context (described in Advanced Functions) + - unbounded multiple steps (described as Streaming compression) + + lz4.h generates and decodes LZ4-compressed blocks (doc/lz4_Block_format.md). + Decompressing such a compressed block requires additional metadata. + Exact metadata depends on exact decompression function. + For the typical case of LZ4_decompress_safe(), + metadata includes block's compressed size, and maximum bound of decompressed size. + Each application is free to encode and pass such metadata in whichever way it wants. + + lz4.h only handle blocks, it can not generate Frames. + + Blocks are different from Frames (doc/lz4_Frame_format.md). + Frames bundle both blocks and metadata in a specified manner. + Embedding metadata is required for compressed data to be self-contained and portable. + Frame format is delivered through a companion API, declared in lz4frame.h. + The `lz4` CLI can only manage frames. +*/ + +/*^*************************************************************** +* Export parameters +*****************************************************************/ +/* +* LZ4_DLL_EXPORT : +* Enable exporting of functions when building a Windows DLL +* LZ4LIB_VISIBILITY : +* Control library symbols visibility. +*/ +#ifndef LZ4LIB_VISIBILITY +# if defined(__GNUC__) && (__GNUC__ >= 4) +# define LZ4LIB_VISIBILITY __attribute__ ((visibility ("default"))) +# else +# define LZ4LIB_VISIBILITY +# endif +#endif +#if defined(LZ4_DLL_EXPORT) && (LZ4_DLL_EXPORT==1) +# define LZ4LIB_API __declspec(dllexport) LZ4LIB_VISIBILITY +#elif defined(LZ4_DLL_IMPORT) && (LZ4_DLL_IMPORT==1) +# define LZ4LIB_API __declspec(dllimport) LZ4LIB_VISIBILITY /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/ +#else +# define LZ4LIB_API LZ4LIB_VISIBILITY +#endif + +/*! LZ4_FREESTANDING : + * When this macro is set to 1, it enables "freestanding mode" that is + * suitable for typical freestanding environment which doesn't support + * standard C library. + * + * - LZ4_FREESTANDING is a compile-time switch. + * - It requires the following macros to be defined: + * LZ4_memcpy, LZ4_memmove, LZ4_memset. + * - It only enables LZ4/HC functions which don't use heap. + * All LZ4F_* functions are not supported. + * - See tests/freestanding.c to check its basic setup. + */ +#if defined(LZ4_FREESTANDING) && (LZ4_FREESTANDING == 1) +# define LZ4_HEAPMODE 0 +# define LZ4HC_HEAPMODE 0 +# define LZ4_STATIC_LINKING_ONLY_DISABLE_MEMORY_ALLOCATION 1 +# if !defined(LZ4_memcpy) +# error "LZ4_FREESTANDING requires macro 'LZ4_memcpy'." +# endif +# if !defined(LZ4_memset) +# error "LZ4_FREESTANDING requires macro 'LZ4_memset'." +# endif +# if !defined(LZ4_memmove) +# error "LZ4_FREESTANDING requires macro 'LZ4_memmove'." +# endif +#elif ! defined(LZ4_FREESTANDING) +# define LZ4_FREESTANDING 0 +#endif + + +/*------ Version ------*/ +#define LZ4_VERSION_MAJOR 1 /* for breaking interface changes */ +#define LZ4_VERSION_MINOR 9 /* for new (non-breaking) interface capabilities */ +#define LZ4_VERSION_RELEASE 4 /* for tweaks, bug-fixes, or development */ + +#define LZ4_VERSION_NUMBER (LZ4_VERSION_MAJOR *100*100 + LZ4_VERSION_MINOR *100 + LZ4_VERSION_RELEASE) + +#define LZ4_LIB_VERSION LZ4_VERSION_MAJOR.LZ4_VERSION_MINOR.LZ4_VERSION_RELEASE +#define LZ4_QUOTE(str) #str +#define LZ4_EXPAND_AND_QUOTE(str) LZ4_QUOTE(str) +#define LZ4_VERSION_STRING LZ4_EXPAND_AND_QUOTE(LZ4_LIB_VERSION) /* requires v1.7.3+ */ + +LZ4LIB_API int LZ4_versionNumber (void); /**< library version number; useful to check dll version; requires v1.3.0+ */ +LZ4LIB_API const char* LZ4_versionString (void); /**< library version string; useful to check dll version; requires v1.7.5+ */ + + +/*-************************************ +* Tuning parameter +**************************************/ +#define LZ4_MEMORY_USAGE_MIN 10 +#define LZ4_MEMORY_USAGE_DEFAULT 14 +#define LZ4_MEMORY_USAGE_MAX 20 + +/*! + * LZ4_MEMORY_USAGE : + * Memory usage formula : N->2^N Bytes (examples : 10 -> 1KB; 12 -> 4KB ; 16 -> 64KB; 20 -> 1MB; ) + * Increasing memory usage improves compression ratio, at the cost of speed. + * Reduced memory usage may improve speed at the cost of ratio, thanks to better cache locality. + * Default value is 14, for 16KB, which nicely fits into Intel x86 L1 cache + */ +#ifndef LZ4_MEMORY_USAGE +# define LZ4_MEMORY_USAGE LZ4_MEMORY_USAGE_DEFAULT +#endif + +#if (LZ4_MEMORY_USAGE < LZ4_MEMORY_USAGE_MIN) +# error "LZ4_MEMORY_USAGE is too small !" +#endif + +#if (LZ4_MEMORY_USAGE > LZ4_MEMORY_USAGE_MAX) +# error "LZ4_MEMORY_USAGE is too large !" +#endif + +/*-************************************ +* Simple Functions +**************************************/ +/*! LZ4_compress_default() : + * Compresses 'srcSize' bytes from buffer 'src' + * into already allocated 'dst' buffer of size 'dstCapacity'. + * Compression is guaranteed to succeed if 'dstCapacity' >= LZ4_compressBound(srcSize). + * It also runs faster, so it's a recommended setting. + * If the function cannot compress 'src' into a more limited 'dst' budget, + * compression stops *immediately*, and the function result is zero. + * In which case, 'dst' content is undefined (invalid). + * srcSize : max supported value is LZ4_MAX_INPUT_SIZE. + * dstCapacity : size of buffer 'dst' (which must be already allocated) + * @return : the number of bytes written into buffer 'dst' (necessarily <= dstCapacity) + * or 0 if compression fails + * Note : This function is protected against buffer overflow scenarios (never writes outside 'dst' buffer, nor read outside 'source' buffer). + */ +LZ4LIB_API int LZ4_compress_default(const char* src, char* dst, int srcSize, int dstCapacity); + +/*! LZ4_decompress_safe() : + * @compressedSize : is the exact complete size of the compressed block. + * @dstCapacity : is the size of destination buffer (which must be already allocated), + * is an upper bound of decompressed size. + * @return : the number of bytes decompressed into destination buffer (necessarily <= dstCapacity) + * If destination buffer is not large enough, decoding will stop and output an error code (negative value). + * If the source stream is detected malformed, the function will stop decoding and return a negative result. + * Note 1 : This function is protected against malicious data packets : + * it will never writes outside 'dst' buffer, nor read outside 'source' buffer, + * even if the compressed block is maliciously modified to order the decoder to do these actions. + * In such case, the decoder stops immediately, and considers the compressed block malformed. + * Note 2 : compressedSize and dstCapacity must be provided to the function, the compressed block does not contain them. + * The implementation is free to send / store / derive this information in whichever way is most beneficial. + * If there is a need for a different format which bundles together both compressed data and its metadata, consider looking at lz4frame.h instead. + */ +LZ4LIB_API int LZ4_decompress_safe (const char* src, char* dst, int compressedSize, int dstCapacity); + + +/*-************************************ +* Advanced Functions +**************************************/ +#define LZ4_MAX_INPUT_SIZE 0x7E000000 /* 2 113 929 216 bytes */ +#define LZ4_COMPRESSBOUND(isize) ((unsigned)(isize) > (unsigned)LZ4_MAX_INPUT_SIZE ? 0 : (isize) + ((isize)/255) + 16) + +/*! LZ4_compressBound() : + Provides the maximum size that LZ4 compression may output in a "worst case" scenario (input data not compressible) + This function is primarily useful for memory allocation purposes (destination buffer size). + Macro LZ4_COMPRESSBOUND() is also provided for compilation-time evaluation (stack memory allocation for example). + Note that LZ4_compress_default() compresses faster when dstCapacity is >= LZ4_compressBound(srcSize) + inputSize : max supported value is LZ4_MAX_INPUT_SIZE + return : maximum output size in a "worst case" scenario + or 0, if input size is incorrect (too large or negative) +*/ +LZ4LIB_API int LZ4_compressBound(int inputSize); + +/*! LZ4_compress_fast() : + Same as LZ4_compress_default(), but allows selection of "acceleration" factor. + The larger the acceleration value, the faster the algorithm, but also the lesser the compression. + It's a trade-off. It can be fine tuned, with each successive value providing roughly +~3% to speed. + An acceleration value of "1" is the same as regular LZ4_compress_default() + Values <= 0 will be replaced by LZ4_ACCELERATION_DEFAULT (currently == 1, see lz4.c). + Values > LZ4_ACCELERATION_MAX will be replaced by LZ4_ACCELERATION_MAX (currently == 65537, see lz4.c). +*/ +LZ4LIB_API int LZ4_compress_fast (const char* src, char* dst, int srcSize, int dstCapacity, int acceleration); + + +/*! LZ4_compress_fast_extState() : + * Same as LZ4_compress_fast(), using an externally allocated memory space for its state. + * Use LZ4_sizeofState() to know how much memory must be allocated, + * and allocate it on 8-bytes boundaries (using `malloc()` typically). + * Then, provide this buffer as `void* state` to compression function. + */ +LZ4LIB_API int LZ4_sizeofState(void); +LZ4LIB_API int LZ4_compress_fast_extState (void* state, const char* src, char* dst, int srcSize, int dstCapacity, int acceleration); + + +/*! LZ4_compress_destSize() : + * Reverse the logic : compresses as much data as possible from 'src' buffer + * into already allocated buffer 'dst', of size >= 'targetDestSize'. + * This function either compresses the entire 'src' content into 'dst' if it's large enough, + * or fill 'dst' buffer completely with as much data as possible from 'src'. + * note: acceleration parameter is fixed to "default". + * + * *srcSizePtr : will be modified to indicate how many bytes where read from 'src' to fill 'dst'. + * New value is necessarily <= input value. + * @return : Nb bytes written into 'dst' (necessarily <= targetDestSize) + * or 0 if compression fails. + * + * Note : from v1.8.2 to v1.9.1, this function had a bug (fixed un v1.9.2+): + * the produced compressed content could, in specific circumstances, + * require to be decompressed into a destination buffer larger + * by at least 1 byte than the content to decompress. + * If an application uses `LZ4_compress_destSize()`, + * it's highly recommended to update liblz4 to v1.9.2 or better. + * If this can't be done or ensured, + * the receiving decompression function should provide + * a dstCapacity which is > decompressedSize, by at least 1 byte. + * See https://github.com/lz4/lz4/issues/859 for details + */ +LZ4LIB_API int LZ4_compress_destSize (const char* src, char* dst, int* srcSizePtr, int targetDstSize); + + +/*! LZ4_decompress_safe_partial() : + * Decompress an LZ4 compressed block, of size 'srcSize' at position 'src', + * into destination buffer 'dst' of size 'dstCapacity'. + * Up to 'targetOutputSize' bytes will be decoded. + * The function stops decoding on reaching this objective. + * This can be useful to boost performance + * whenever only the beginning of a block is required. + * + * @return : the number of bytes decoded in `dst` (necessarily <= targetOutputSize) + * If source stream is detected malformed, function returns a negative result. + * + * Note 1 : @return can be < targetOutputSize, if compressed block contains less data. + * + * Note 2 : targetOutputSize must be <= dstCapacity + * + * Note 3 : this function effectively stops decoding on reaching targetOutputSize, + * so dstCapacity is kind of redundant. + * This is because in older versions of this function, + * decoding operation would still write complete sequences. + * Therefore, there was no guarantee that it would stop writing at exactly targetOutputSize, + * it could write more bytes, though only up to dstCapacity. + * Some "margin" used to be required for this operation to work properly. + * Thankfully, this is no longer necessary. + * The function nonetheless keeps the same signature, in an effort to preserve API compatibility. + * + * Note 4 : If srcSize is the exact size of the block, + * then targetOutputSize can be any value, + * including larger than the block's decompressed size. + * The function will, at most, generate block's decompressed size. + * + * Note 5 : If srcSize is _larger_ than block's compressed size, + * then targetOutputSize **MUST** be <= block's decompressed size. + * Otherwise, *silent corruption will occur*. + */ +LZ4LIB_API int LZ4_decompress_safe_partial (const char* src, char* dst, int srcSize, int targetOutputSize, int dstCapacity); + + +/*-********************************************* +* Streaming Compression Functions +***********************************************/ +typedef union LZ4_stream_u LZ4_stream_t; /* incomplete type (defined later) */ + +/** + Note about RC_INVOKED + + - RC_INVOKED is predefined symbol of rc.exe (the resource compiler which is part of MSVC/Visual Studio). + https://docs.microsoft.com/en-us/windows/win32/menurc/predefined-macros + + - Since rc.exe is a legacy compiler, it truncates long symbol (> 30 chars) + and reports warning "RC4011: identifier truncated". + + - To eliminate the warning, we surround long preprocessor symbol with + "#if !defined(RC_INVOKED) ... #endif" block that means + "skip this block when rc.exe is trying to read it". +*/ +#if !defined(RC_INVOKED) /* https://docs.microsoft.com/en-us/windows/win32/menurc/predefined-macros */ +#if !defined(LZ4_STATIC_LINKING_ONLY_DISABLE_MEMORY_ALLOCATION) +LZ4LIB_API LZ4_stream_t* LZ4_createStream(void); +LZ4LIB_API int LZ4_freeStream (LZ4_stream_t* streamPtr); +#endif /* !defined(LZ4_STATIC_LINKING_ONLY_DISABLE_MEMORY_ALLOCATION) */ +#endif + +/*! LZ4_resetStream_fast() : v1.9.0+ + * Use this to prepare an LZ4_stream_t for a new chain of dependent blocks + * (e.g., LZ4_compress_fast_continue()). + * + * An LZ4_stream_t must be initialized once before usage. + * This is automatically done when created by LZ4_createStream(). + * However, should the LZ4_stream_t be simply declared on stack (for example), + * it's necessary to initialize it first, using LZ4_initStream(). + * + * After init, start any new stream with LZ4_resetStream_fast(). + * A same LZ4_stream_t can be re-used multiple times consecutively + * and compress multiple streams, + * provided that it starts each new stream with LZ4_resetStream_fast(). + * + * LZ4_resetStream_fast() is much faster than LZ4_initStream(), + * but is not compatible with memory regions containing garbage data. + * + * Note: it's only useful to call LZ4_resetStream_fast() + * in the context of streaming compression. + * The *extState* functions perform their own resets. + * Invoking LZ4_resetStream_fast() before is redundant, and even counterproductive. + */ +LZ4LIB_API void LZ4_resetStream_fast (LZ4_stream_t* streamPtr); + +/*! LZ4_loadDict() : + * Use this function to reference a static dictionary into LZ4_stream_t. + * The dictionary must remain available during compression. + * LZ4_loadDict() triggers a reset, so any previous data will be forgotten. + * The same dictionary will have to be loaded on decompression side for successful decoding. + * Dictionary are useful for better compression of small data (KB range). + * While LZ4 accept any input as dictionary, + * results are generally better when using Zstandard's Dictionary Builder. + * Loading a size of 0 is allowed, and is the same as reset. + * @return : loaded dictionary size, in bytes (necessarily <= 64 KB) + */ +LZ4LIB_API int LZ4_loadDict (LZ4_stream_t* streamPtr, const char* dictionary, int dictSize); + +/*! LZ4_compress_fast_continue() : + * Compress 'src' content using data from previously compressed blocks, for better compression ratio. + * 'dst' buffer must be already allocated. + * If dstCapacity >= LZ4_compressBound(srcSize), compression is guaranteed to succeed, and runs faster. + * + * @return : size of compressed block + * or 0 if there is an error (typically, cannot fit into 'dst'). + * + * Note 1 : Each invocation to LZ4_compress_fast_continue() generates a new block. + * Each block has precise boundaries. + * Each block must be decompressed separately, calling LZ4_decompress_*() with relevant metadata. + * It's not possible to append blocks together and expect a single invocation of LZ4_decompress_*() to decompress them together. + * + * Note 2 : The previous 64KB of source data is __assumed__ to remain present, unmodified, at same address in memory ! + * + * Note 3 : When input is structured as a double-buffer, each buffer can have any size, including < 64 KB. + * Make sure that buffers are separated, by at least one byte. + * This construction ensures that each block only depends on previous block. + * + * Note 4 : If input buffer is a ring-buffer, it can have any size, including < 64 KB. + * + * Note 5 : After an error, the stream status is undefined (invalid), it can only be reset or freed. + */ +LZ4LIB_API int LZ4_compress_fast_continue (LZ4_stream_t* streamPtr, const char* src, char* dst, int srcSize, int dstCapacity, int acceleration); + +/*! LZ4_saveDict() : + * If last 64KB data cannot be guaranteed to remain available at its current memory location, + * save it into a safer place (char* safeBuffer). + * This is schematically equivalent to a memcpy() followed by LZ4_loadDict(), + * but is much faster, because LZ4_saveDict() doesn't need to rebuild tables. + * @return : saved dictionary size in bytes (necessarily <= maxDictSize), or 0 if error. + */ +LZ4LIB_API int LZ4_saveDict (LZ4_stream_t* streamPtr, char* safeBuffer, int maxDictSize); + + +/*-********************************************** +* Streaming Decompression Functions +* Bufferless synchronous API +************************************************/ +typedef union LZ4_streamDecode_u LZ4_streamDecode_t; /* tracking context */ + +/*! LZ4_createStreamDecode() and LZ4_freeStreamDecode() : + * creation / destruction of streaming decompression tracking context. + * A tracking context can be re-used multiple times. + */ +#if !defined(RC_INVOKED) /* https://docs.microsoft.com/en-us/windows/win32/menurc/predefined-macros */ +#if !defined(LZ4_STATIC_LINKING_ONLY_DISABLE_MEMORY_ALLOCATION) +LZ4LIB_API LZ4_streamDecode_t* LZ4_createStreamDecode(void); +LZ4LIB_API int LZ4_freeStreamDecode (LZ4_streamDecode_t* LZ4_stream); +#endif /* !defined(LZ4_STATIC_LINKING_ONLY_DISABLE_MEMORY_ALLOCATION) */ +#endif + +/*! LZ4_setStreamDecode() : + * An LZ4_streamDecode_t context can be allocated once and re-used multiple times. + * Use this function to start decompression of a new stream of blocks. + * A dictionary can optionally be set. Use NULL or size 0 for a reset order. + * Dictionary is presumed stable : it must remain accessible and unmodified during next decompression. + * @return : 1 if OK, 0 if error + */ +LZ4LIB_API int LZ4_setStreamDecode (LZ4_streamDecode_t* LZ4_streamDecode, const char* dictionary, int dictSize); + +/*! LZ4_decoderRingBufferSize() : v1.8.2+ + * Note : in a ring buffer scenario (optional), + * blocks are presumed decompressed next to each other + * up to the moment there is not enough remaining space for next block (remainingSize < maxBlockSize), + * at which stage it resumes from beginning of ring buffer. + * When setting such a ring buffer for streaming decompression, + * provides the minimum size of this ring buffer + * to be compatible with any source respecting maxBlockSize condition. + * @return : minimum ring buffer size, + * or 0 if there is an error (invalid maxBlockSize). + */ +LZ4LIB_API int LZ4_decoderRingBufferSize(int maxBlockSize); +#define LZ4_DECODER_RING_BUFFER_SIZE(maxBlockSize) (65536 + 14 + (maxBlockSize)) /* for static allocation; maxBlockSize presumed valid */ + +/*! LZ4_decompress_safe_continue() : + * This decoding function allows decompression of consecutive blocks in "streaming" mode. + * The difference with the usual independent blocks is that + * new blocks are allowed to find references into former blocks. + * A block is an unsplittable entity, and must be presented entirely to the decompression function. + * LZ4_decompress_safe_continue() only accepts one block at a time. + * It's modeled after `LZ4_decompress_safe()` and behaves similarly. + * + * @LZ4_streamDecode : decompression state, tracking the position in memory of past data + * @compressedSize : exact complete size of one compressed block. + * @dstCapacity : size of destination buffer (which must be already allocated), + * must be an upper bound of decompressed size. + * @return : number of bytes decompressed into destination buffer (necessarily <= dstCapacity) + * If destination buffer is not large enough, decoding will stop and output an error code (negative value). + * If the source stream is detected malformed, the function will stop decoding and return a negative result. + * + * The last 64KB of previously decoded data *must* remain available and unmodified + * at the memory position where they were previously decoded. + * If less than 64KB of data has been decoded, all the data must be present. + * + * Special : if decompression side sets a ring buffer, it must respect one of the following conditions : + * - Decompression buffer size is _at least_ LZ4_decoderRingBufferSize(maxBlockSize). + * maxBlockSize is the maximum size of any single block. It can have any value > 16 bytes. + * In which case, encoding and decoding buffers do not need to be synchronized. + * Actually, data can be produced by any source compliant with LZ4 format specification, and respecting maxBlockSize. + * - Synchronized mode : + * Decompression buffer size is _exactly_ the same as compression buffer size, + * and follows exactly same update rule (block boundaries at same positions), + * and decoding function is provided with exact decompressed size of each block (exception for last block of the stream), + * _then_ decoding & encoding ring buffer can have any size, including small ones ( < 64 KB). + * - Decompression buffer is larger than encoding buffer, by a minimum of maxBlockSize more bytes. + * In which case, encoding and decoding buffers do not need to be synchronized, + * and encoding ring buffer can have any size, including small ones ( < 64 KB). + * + * Whenever these conditions are not possible, + * save the last 64KB of decoded data into a safe buffer where it can't be modified during decompression, + * then indicate where this data is saved using LZ4_setStreamDecode(), before decompressing next block. +*/ +LZ4LIB_API int +LZ4_decompress_safe_continue (LZ4_streamDecode_t* LZ4_streamDecode, + const char* src, char* dst, + int srcSize, int dstCapacity); + + +/*! LZ4_decompress_safe_usingDict() : + * Works the same as + * a combination of LZ4_setStreamDecode() followed by LZ4_decompress_safe_continue() + * However, it's stateless: it doesn't need any LZ4_streamDecode_t state. + * Dictionary is presumed stable : it must remain accessible and unmodified during decompression. + * Performance tip : Decompression speed can be substantially increased + * when dst == dictStart + dictSize. + */ +LZ4LIB_API int +LZ4_decompress_safe_usingDict(const char* src, char* dst, + int srcSize, int dstCapacity, + const char* dictStart, int dictSize); + +/*! LZ4_decompress_safe_partial_usingDict() : + * Behaves the same as LZ4_decompress_safe_partial() + * with the added ability to specify a memory segment for past data. + * Performance tip : Decompression speed can be substantially increased + * when dst == dictStart + dictSize. + */ +LZ4LIB_API int +LZ4_decompress_safe_partial_usingDict(const char* src, char* dst, + int compressedSize, + int targetOutputSize, int maxOutputSize, + const char* dictStart, int dictSize); + +#endif /* LZ4_H_2983827168210 */ + + +/*^************************************* + * !!!!!! STATIC LINKING ONLY !!!!!! + ***************************************/ + +/*-**************************************************************************** + * Experimental section + * + * Symbols declared in this section must be considered unstable. Their + * signatures or semantics may change, or they may be removed altogether in the + * future. They are therefore only safe to depend on when the caller is + * statically linked against the library. + * + * To protect against unsafe usage, not only are the declarations guarded, + * the definitions are hidden by default + * when building LZ4 as a shared/dynamic library. + * + * In order to access these declarations, + * define LZ4_STATIC_LINKING_ONLY in your application + * before including LZ4's headers. + * + * In order to make their implementations accessible dynamically, you must + * define LZ4_PUBLISH_STATIC_FUNCTIONS when building the LZ4 library. + ******************************************************************************/ + +#ifdef LZ4_STATIC_LINKING_ONLY + +#ifndef LZ4_STATIC_3504398509 +#define LZ4_STATIC_3504398509 + +#ifdef LZ4_PUBLISH_STATIC_FUNCTIONS +#define LZ4LIB_STATIC_API LZ4LIB_API +#else +#define LZ4LIB_STATIC_API +#endif + + +/*! LZ4_compress_fast_extState_fastReset() : + * A variant of LZ4_compress_fast_extState(). + * + * Using this variant avoids an expensive initialization step. + * It is only safe to call if the state buffer is known to be correctly initialized already + * (see above comment on LZ4_resetStream_fast() for a definition of "correctly initialized"). + * From a high level, the difference is that + * this function initializes the provided state with a call to something like LZ4_resetStream_fast() + * while LZ4_compress_fast_extState() starts with a call to LZ4_resetStream(). + */ +LZ4LIB_STATIC_API int LZ4_compress_fast_extState_fastReset (void* state, const char* src, char* dst, int srcSize, int dstCapacity, int acceleration); + +/*! LZ4_attach_dictionary() : + * This is an experimental API that allows + * efficient use of a static dictionary many times. + * + * Rather than re-loading the dictionary buffer into a working context before + * each compression, or copying a pre-loaded dictionary's LZ4_stream_t into a + * working LZ4_stream_t, this function introduces a no-copy setup mechanism, + * in which the working stream references the dictionary stream in-place. + * + * Several assumptions are made about the state of the dictionary stream. + * Currently, only streams which have been prepared by LZ4_loadDict() should + * be expected to work. + * + * Alternatively, the provided dictionaryStream may be NULL, + * in which case any existing dictionary stream is unset. + * + * If a dictionary is provided, it replaces any pre-existing stream history. + * The dictionary contents are the only history that can be referenced and + * logically immediately precede the data compressed in the first subsequent + * compression call. + * + * The dictionary will only remain attached to the working stream through the + * first compression call, at the end of which it is cleared. The dictionary + * stream (and source buffer) must remain in-place / accessible / unchanged + * through the completion of the first compression call on the stream. + */ +LZ4LIB_STATIC_API void +LZ4_attach_dictionary(LZ4_stream_t* workingStream, + const LZ4_stream_t* dictionaryStream); + + +/*! In-place compression and decompression + * + * It's possible to have input and output sharing the same buffer, + * for highly constrained memory environments. + * In both cases, it requires input to lay at the end of the buffer, + * and decompression to start at beginning of the buffer. + * Buffer size must feature some margin, hence be larger than final size. + * + * |<------------------------buffer--------------------------------->| + * |<-----------compressed data--------->| + * |<-----------decompressed size------------------>| + * |<----margin---->| + * + * This technique is more useful for decompression, + * since decompressed size is typically larger, + * and margin is short. + * + * In-place decompression will work inside any buffer + * which size is >= LZ4_DECOMPRESS_INPLACE_BUFFER_SIZE(decompressedSize). + * This presumes that decompressedSize > compressedSize. + * Otherwise, it means compression actually expanded data, + * and it would be more efficient to store such data with a flag indicating it's not compressed. + * This can happen when data is not compressible (already compressed, or encrypted). + * + * For in-place compression, margin is larger, as it must be able to cope with both + * history preservation, requiring input data to remain unmodified up to LZ4_DISTANCE_MAX, + * and data expansion, which can happen when input is not compressible. + * As a consequence, buffer size requirements are much higher, + * and memory savings offered by in-place compression are more limited. + * + * There are ways to limit this cost for compression : + * - Reduce history size, by modifying LZ4_DISTANCE_MAX. + * Note that it is a compile-time constant, so all compressions will apply this limit. + * Lower values will reduce compression ratio, except when input_size < LZ4_DISTANCE_MAX, + * so it's a reasonable trick when inputs are known to be small. + * - Require the compressor to deliver a "maximum compressed size". + * This is the `dstCapacity` parameter in `LZ4_compress*()`. + * When this size is < LZ4_COMPRESSBOUND(inputSize), then compression can fail, + * in which case, the return code will be 0 (zero). + * The caller must be ready for these cases to happen, + * and typically design a backup scheme to send data uncompressed. + * The combination of both techniques can significantly reduce + * the amount of margin required for in-place compression. + * + * In-place compression can work in any buffer + * which size is >= (maxCompressedSize) + * with maxCompressedSize == LZ4_COMPRESSBOUND(srcSize) for guaranteed compression success. + * LZ4_COMPRESS_INPLACE_BUFFER_SIZE() depends on both maxCompressedSize and LZ4_DISTANCE_MAX, + * so it's possible to reduce memory requirements by playing with them. + */ + +#define LZ4_DECOMPRESS_INPLACE_MARGIN(compressedSize) (((compressedSize) >> 8) + 32) +#define LZ4_DECOMPRESS_INPLACE_BUFFER_SIZE(decompressedSize) ((decompressedSize) + LZ4_DECOMPRESS_INPLACE_MARGIN(decompressedSize)) /**< note: presumes that compressedSize < decompressedSize. note2: margin is overestimated a bit, since it could use compressedSize instead */ + +#ifndef LZ4_DISTANCE_MAX /* history window size; can be user-defined at compile time */ +# define LZ4_DISTANCE_MAX 65535 /* set to maximum value by default */ +#endif + +#define LZ4_COMPRESS_INPLACE_MARGIN (LZ4_DISTANCE_MAX + 32) /* LZ4_DISTANCE_MAX can be safely replaced by srcSize when it's smaller */ +#define LZ4_COMPRESS_INPLACE_BUFFER_SIZE(maxCompressedSize) ((maxCompressedSize) + LZ4_COMPRESS_INPLACE_MARGIN) /**< maxCompressedSize is generally LZ4_COMPRESSBOUND(inputSize), but can be set to any lower value, with the risk that compression can fail (return code 0(zero)) */ + +#endif /* LZ4_STATIC_3504398509 */ +#endif /* LZ4_STATIC_LINKING_ONLY */ + + + +#ifndef LZ4_H_98237428734687 +#define LZ4_H_98237428734687 + +/*-************************************************************ + * Private Definitions + ************************************************************** + * Do not use these definitions directly. + * They are only exposed to allow static allocation of `LZ4_stream_t` and `LZ4_streamDecode_t`. + * Accessing members will expose user code to API and/or ABI break in future versions of the library. + **************************************************************/ +#define LZ4_HASHLOG (LZ4_MEMORY_USAGE-2) +#define LZ4_HASHTABLESIZE (1 << LZ4_MEMORY_USAGE) +#define LZ4_HASH_SIZE_U32 (1 << LZ4_HASHLOG) /* required as macro for static allocation */ + +#if defined(__cplusplus) || (defined (__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 */) +# include + typedef int8_t LZ4_i8; + typedef uint8_t LZ4_byte; + typedef uint16_t LZ4_u16; + typedef uint32_t LZ4_u32; +#else + typedef signed char LZ4_i8; + typedef unsigned char LZ4_byte; + typedef unsigned short LZ4_u16; + typedef unsigned int LZ4_u32; +#endif + +/*! LZ4_stream_t : + * Never ever use below internal definitions directly ! + * These definitions are not API/ABI safe, and may change in future versions. + * If you need static allocation, declare or allocate an LZ4_stream_t object. +**/ + +typedef struct LZ4_stream_t_internal LZ4_stream_t_internal; +struct LZ4_stream_t_internal { + LZ4_u32 hashTable[LZ4_HASH_SIZE_U32]; + const LZ4_byte* dictionary; + const LZ4_stream_t_internal* dictCtx; + LZ4_u32 currentOffset; + LZ4_u32 tableType; + LZ4_u32 dictSize; + /* Implicit padding to ensure structure is aligned */ +}; + +#define LZ4_STREAM_MINSIZE ((1UL << LZ4_MEMORY_USAGE) + 32) /* static size, for inter-version compatibility */ +union LZ4_stream_u { + char minStateSize[LZ4_STREAM_MINSIZE]; + LZ4_stream_t_internal internal_donotuse; +}; /* previously typedef'd to LZ4_stream_t */ + + +/*! LZ4_initStream() : v1.9.0+ + * An LZ4_stream_t structure must be initialized at least once. + * This is automatically done when invoking LZ4_createStream(), + * but it's not when the structure is simply declared on stack (for example). + * + * Use LZ4_initStream() to properly initialize a newly declared LZ4_stream_t. + * It can also initialize any arbitrary buffer of sufficient size, + * and will @return a pointer of proper type upon initialization. + * + * Note : initialization fails if size and alignment conditions are not respected. + * In which case, the function will @return NULL. + * Note2: An LZ4_stream_t structure guarantees correct alignment and size. + * Note3: Before v1.9.0, use LZ4_resetStream() instead +**/ +LZ4LIB_API LZ4_stream_t* LZ4_initStream (void* buffer, size_t size); + + +/*! LZ4_streamDecode_t : + * Never ever use below internal definitions directly ! + * These definitions are not API/ABI safe, and may change in future versions. + * If you need static allocation, declare or allocate an LZ4_streamDecode_t object. +**/ +typedef struct { + const LZ4_byte* externalDict; + const LZ4_byte* prefixEnd; + size_t extDictSize; + size_t prefixSize; +} LZ4_streamDecode_t_internal; + +#define LZ4_STREAMDECODE_MINSIZE 32 +union LZ4_streamDecode_u { + char minStateSize[LZ4_STREAMDECODE_MINSIZE]; + LZ4_streamDecode_t_internal internal_donotuse; +} ; /* previously typedef'd to LZ4_streamDecode_t */ + + + +/*-************************************ +* Obsolete Functions +**************************************/ + +/*! Deprecation warnings + * + * Deprecated functions make the compiler generate a warning when invoked. + * This is meant to invite users to update their source code. + * Should deprecation warnings be a problem, it is generally possible to disable them, + * typically with -Wno-deprecated-declarations for gcc + * or _CRT_SECURE_NO_WARNINGS in Visual. + * + * Another method is to define LZ4_DISABLE_DEPRECATE_WARNINGS + * before including the header file. + */ +#ifdef LZ4_DISABLE_DEPRECATE_WARNINGS +# define LZ4_DEPRECATED(message) /* disable deprecation warnings */ +#else +# if defined (__cplusplus) && (__cplusplus >= 201402) /* C++14 or greater */ +# define LZ4_DEPRECATED(message) [[deprecated(message)]] +# elif defined(_MSC_VER) +# define LZ4_DEPRECATED(message) __declspec(deprecated(message)) +# elif defined(__clang__) || (defined(__GNUC__) && (__GNUC__ * 10 + __GNUC_MINOR__ >= 45)) +# define LZ4_DEPRECATED(message) __attribute__((deprecated(message))) +# elif defined(__GNUC__) && (__GNUC__ * 10 + __GNUC_MINOR__ >= 31) +# define LZ4_DEPRECATED(message) __attribute__((deprecated)) +# else +# pragma message("WARNING: LZ4_DEPRECATED needs custom implementation for this compiler") +# define LZ4_DEPRECATED(message) /* disabled */ +# endif +#endif /* LZ4_DISABLE_DEPRECATE_WARNINGS */ + +/*! Obsolete compression functions (since v1.7.3) */ +LZ4_DEPRECATED("use LZ4_compress_default() instead") LZ4LIB_API int LZ4_compress (const char* src, char* dest, int srcSize); +LZ4_DEPRECATED("use LZ4_compress_default() instead") LZ4LIB_API int LZ4_compress_limitedOutput (const char* src, char* dest, int srcSize, int maxOutputSize); +LZ4_DEPRECATED("use LZ4_compress_fast_extState() instead") LZ4LIB_API int LZ4_compress_withState (void* state, const char* source, char* dest, int inputSize); +LZ4_DEPRECATED("use LZ4_compress_fast_extState() instead") LZ4LIB_API int LZ4_compress_limitedOutput_withState (void* state, const char* source, char* dest, int inputSize, int maxOutputSize); +LZ4_DEPRECATED("use LZ4_compress_fast_continue() instead") LZ4LIB_API int LZ4_compress_continue (LZ4_stream_t* LZ4_streamPtr, const char* source, char* dest, int inputSize); +LZ4_DEPRECATED("use LZ4_compress_fast_continue() instead") LZ4LIB_API int LZ4_compress_limitedOutput_continue (LZ4_stream_t* LZ4_streamPtr, const char* source, char* dest, int inputSize, int maxOutputSize); + +/*! Obsolete decompression functions (since v1.8.0) */ +LZ4_DEPRECATED("use LZ4_decompress_fast() instead") LZ4LIB_API int LZ4_uncompress (const char* source, char* dest, int outputSize); +LZ4_DEPRECATED("use LZ4_decompress_safe() instead") LZ4LIB_API int LZ4_uncompress_unknownOutputSize (const char* source, char* dest, int isize, int maxOutputSize); + +/* Obsolete streaming functions (since v1.7.0) + * degraded functionality; do not use! + * + * In order to perform streaming compression, these functions depended on data + * that is no longer tracked in the state. They have been preserved as well as + * possible: using them will still produce a correct output. However, they don't + * actually retain any history between compression calls. The compression ratio + * achieved will therefore be no better than compressing each chunk + * independently. + */ +LZ4_DEPRECATED("Use LZ4_createStream() instead") LZ4LIB_API void* LZ4_create (char* inputBuffer); +LZ4_DEPRECATED("Use LZ4_createStream() instead") LZ4LIB_API int LZ4_sizeofStreamState(void); +LZ4_DEPRECATED("Use LZ4_resetStream() instead") LZ4LIB_API int LZ4_resetStreamState(void* state, char* inputBuffer); +LZ4_DEPRECATED("Use LZ4_saveDict() instead") LZ4LIB_API char* LZ4_slideInputBuffer (void* state); + +/*! Obsolete streaming decoding functions (since v1.7.0) */ +LZ4_DEPRECATED("use LZ4_decompress_safe_usingDict() instead") LZ4LIB_API int LZ4_decompress_safe_withPrefix64k (const char* src, char* dst, int compressedSize, int maxDstSize); +LZ4_DEPRECATED("use LZ4_decompress_fast_usingDict() instead") LZ4LIB_API int LZ4_decompress_fast_withPrefix64k (const char* src, char* dst, int originalSize); + +/*! Obsolete LZ4_decompress_fast variants (since v1.9.0) : + * These functions used to be faster than LZ4_decompress_safe(), + * but this is no longer the case. They are now slower. + * This is because LZ4_decompress_fast() doesn't know the input size, + * and therefore must progress more cautiously into the input buffer to not read beyond the end of block. + * On top of that `LZ4_decompress_fast()` is not protected vs malformed or malicious inputs, making it a security liability. + * As a consequence, LZ4_decompress_fast() is strongly discouraged, and deprecated. + * + * The last remaining LZ4_decompress_fast() specificity is that + * it can decompress a block without knowing its compressed size. + * Such functionality can be achieved in a more secure manner + * by employing LZ4_decompress_safe_partial(). + * + * Parameters: + * originalSize : is the uncompressed size to regenerate. + * `dst` must be already allocated, its size must be >= 'originalSize' bytes. + * @return : number of bytes read from source buffer (== compressed size). + * The function expects to finish at block's end exactly. + * If the source stream is detected malformed, the function stops decoding and returns a negative result. + * note : LZ4_decompress_fast*() requires originalSize. Thanks to this information, it never writes past the output buffer. + * However, since it doesn't know its 'src' size, it may read an unknown amount of input, past input buffer bounds. + * Also, since match offsets are not validated, match reads from 'src' may underflow too. + * These issues never happen if input (compressed) data is correct. + * But they may happen if input data is invalid (error or intentional tampering). + * As a consequence, use these functions in trusted environments with trusted data **only**. + */ +LZ4_DEPRECATED("This function is deprecated and unsafe. Consider using LZ4_decompress_safe() instead") +LZ4LIB_API int LZ4_decompress_fast (const char* src, char* dst, int originalSize); +LZ4_DEPRECATED("This function is deprecated and unsafe. Consider using LZ4_decompress_safe_continue() instead") +LZ4LIB_API int LZ4_decompress_fast_continue (LZ4_streamDecode_t* LZ4_streamDecode, const char* src, char* dst, int originalSize); +LZ4_DEPRECATED("This function is deprecated and unsafe. Consider using LZ4_decompress_safe_usingDict() instead") +LZ4LIB_API int LZ4_decompress_fast_usingDict (const char* src, char* dst, int originalSize, const char* dictStart, int dictSize); + +/*! LZ4_resetStream() : + * An LZ4_stream_t structure must be initialized at least once. + * This is done with LZ4_initStream(), or LZ4_resetStream(). + * Consider switching to LZ4_initStream(), + * invoking LZ4_resetStream() will trigger deprecation warnings in the future. + */ +LZ4LIB_API void LZ4_resetStream (LZ4_stream_t* streamPtr); + + +#endif /* LZ4_H_98237428734687 */ + + +#if defined (__cplusplus) +} +#endif diff --git a/lz4/include/lz4frame.h b/lz4/include/lz4frame.h new file mode 100644 index 0000000..2c356a3 --- /dev/null +++ b/lz4/include/lz4frame.h @@ -0,0 +1,702 @@ +/* + LZ4F - LZ4-Frame library + Header File + Copyright (C) 2011-2020, Yann Collet. + BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php) + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above + copyright notice, this list of conditions and the following disclaimer + in the documentation and/or other materials provided with the + distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + You can contact the author at : + - LZ4 source repository : https://github.com/lz4/lz4 + - LZ4 public forum : https://groups.google.com/forum/#!forum/lz4c +*/ + +/* LZ4F is a stand-alone API able to create and decode LZ4 frames + * conformant with specification v1.6.1 in doc/lz4_Frame_format.md . + * Generated frames are compatible with `lz4` CLI. + * + * LZ4F also offers streaming capabilities. + * + * lz4.h is not required when using lz4frame.h, + * except to extract common constants such as LZ4_VERSION_NUMBER. + * */ + +#ifndef LZ4F_H_09782039843 +#define LZ4F_H_09782039843 + +#if defined (__cplusplus) +extern "C" { +#endif + +/* --- Dependency --- */ +#include /* size_t */ + + +/** + * Introduction + * + * lz4frame.h implements LZ4 frame specification: see doc/lz4_Frame_format.md . + * LZ4 Frames are compatible with `lz4` CLI, + * and designed to be interoperable with any system. +**/ + +/*-*************************************************************** + * Compiler specifics + *****************************************************************/ +/* LZ4_DLL_EXPORT : + * Enable exporting of functions when building a Windows DLL + * LZ4FLIB_VISIBILITY : + * Control library symbols visibility. + */ +#ifndef LZ4FLIB_VISIBILITY +# if defined(__GNUC__) && (__GNUC__ >= 4) +# define LZ4FLIB_VISIBILITY __attribute__ ((visibility ("default"))) +# else +# define LZ4FLIB_VISIBILITY +# endif +#endif +#if defined(LZ4_DLL_EXPORT) && (LZ4_DLL_EXPORT==1) +# define LZ4FLIB_API __declspec(dllexport) LZ4FLIB_VISIBILITY +#elif defined(LZ4_DLL_IMPORT) && (LZ4_DLL_IMPORT==1) +# define LZ4FLIB_API __declspec(dllimport) LZ4FLIB_VISIBILITY +#else +# define LZ4FLIB_API LZ4FLIB_VISIBILITY +#endif + +#ifdef LZ4F_DISABLE_DEPRECATE_WARNINGS +# define LZ4F_DEPRECATE(x) x +#else +# if defined(_MSC_VER) +# define LZ4F_DEPRECATE(x) x /* __declspec(deprecated) x - only works with C++ */ +# elif defined(__clang__) || (defined(__GNUC__) && (__GNUC__ >= 6)) +# define LZ4F_DEPRECATE(x) x __attribute__((deprecated)) +# else +# define LZ4F_DEPRECATE(x) x /* no deprecation warning for this compiler */ +# endif +#endif + + +/*-************************************ + * Error management + **************************************/ +typedef size_t LZ4F_errorCode_t; + +LZ4FLIB_API unsigned LZ4F_isError(LZ4F_errorCode_t code); /**< tells when a function result is an error code */ +LZ4FLIB_API const char* LZ4F_getErrorName(LZ4F_errorCode_t code); /**< return error code string; for debugging */ + + +/*-************************************ + * Frame compression types + ************************************* */ +/* #define LZ4F_ENABLE_OBSOLETE_ENUMS // uncomment to enable obsolete enums */ +#ifdef LZ4F_ENABLE_OBSOLETE_ENUMS +# define LZ4F_OBSOLETE_ENUM(x) , LZ4F_DEPRECATE(x) = LZ4F_##x +#else +# define LZ4F_OBSOLETE_ENUM(x) +#endif + +/* The larger the block size, the (slightly) better the compression ratio, + * though there are diminishing returns. + * Larger blocks also increase memory usage on both compression and decompression sides. + */ +typedef enum { + LZ4F_default=0, + LZ4F_max64KB=4, + LZ4F_max256KB=5, + LZ4F_max1MB=6, + LZ4F_max4MB=7 + LZ4F_OBSOLETE_ENUM(max64KB) + LZ4F_OBSOLETE_ENUM(max256KB) + LZ4F_OBSOLETE_ENUM(max1MB) + LZ4F_OBSOLETE_ENUM(max4MB) +} LZ4F_blockSizeID_t; + +/* Linked blocks sharply reduce inefficiencies when using small blocks, + * they compress better. + * However, some LZ4 decoders are only compatible with independent blocks */ +typedef enum { + LZ4F_blockLinked=0, + LZ4F_blockIndependent + LZ4F_OBSOLETE_ENUM(blockLinked) + LZ4F_OBSOLETE_ENUM(blockIndependent) +} LZ4F_blockMode_t; + +typedef enum { + LZ4F_noContentChecksum=0, + LZ4F_contentChecksumEnabled + LZ4F_OBSOLETE_ENUM(noContentChecksum) + LZ4F_OBSOLETE_ENUM(contentChecksumEnabled) +} LZ4F_contentChecksum_t; + +typedef enum { + LZ4F_noBlockChecksum=0, + LZ4F_blockChecksumEnabled +} LZ4F_blockChecksum_t; + +typedef enum { + LZ4F_frame=0, + LZ4F_skippableFrame + LZ4F_OBSOLETE_ENUM(skippableFrame) +} LZ4F_frameType_t; + +#ifdef LZ4F_ENABLE_OBSOLETE_ENUMS +typedef LZ4F_blockSizeID_t blockSizeID_t; +typedef LZ4F_blockMode_t blockMode_t; +typedef LZ4F_frameType_t frameType_t; +typedef LZ4F_contentChecksum_t contentChecksum_t; +#endif + +/*! LZ4F_frameInfo_t : + * makes it possible to set or read frame parameters. + * Structure must be first init to 0, using memset() or LZ4F_INIT_FRAMEINFO, + * setting all parameters to default. + * It's then possible to update selectively some parameters */ +typedef struct { + LZ4F_blockSizeID_t blockSizeID; /* max64KB, max256KB, max1MB, max4MB; 0 == default */ + LZ4F_blockMode_t blockMode; /* LZ4F_blockLinked, LZ4F_blockIndependent; 0 == default */ + LZ4F_contentChecksum_t contentChecksumFlag; /* 1: frame terminated with 32-bit checksum of decompressed data; 0: disabled (default) */ + LZ4F_frameType_t frameType; /* read-only field : LZ4F_frame or LZ4F_skippableFrame */ + unsigned long long contentSize; /* Size of uncompressed content ; 0 == unknown */ + unsigned dictID; /* Dictionary ID, sent by compressor to help decoder select correct dictionary; 0 == no dictID provided */ + LZ4F_blockChecksum_t blockChecksumFlag; /* 1: each block followed by a checksum of block's compressed data; 0: disabled (default) */ +} LZ4F_frameInfo_t; + +#define LZ4F_INIT_FRAMEINFO { LZ4F_default, LZ4F_blockLinked, LZ4F_noContentChecksum, LZ4F_frame, 0ULL, 0U, LZ4F_noBlockChecksum } /* v1.8.3+ */ + +/*! LZ4F_preferences_t : + * makes it possible to supply advanced compression instructions to streaming interface. + * Structure must be first init to 0, using memset() or LZ4F_INIT_PREFERENCES, + * setting all parameters to default. + * All reserved fields must be set to zero. */ +typedef struct { + LZ4F_frameInfo_t frameInfo; + int compressionLevel; /* 0: default (fast mode); values > LZ4HC_CLEVEL_MAX count as LZ4HC_CLEVEL_MAX; values < 0 trigger "fast acceleration" */ + unsigned autoFlush; /* 1: always flush; reduces usage of internal buffers */ + unsigned favorDecSpeed; /* 1: parser favors decompression speed vs compression ratio. Only works for high compression modes (>= LZ4HC_CLEVEL_OPT_MIN) */ /* v1.8.2+ */ + unsigned reserved[3]; /* must be zero for forward compatibility */ +} LZ4F_preferences_t; + +#define LZ4F_INIT_PREFERENCES { LZ4F_INIT_FRAMEINFO, 0, 0u, 0u, { 0u, 0u, 0u } } /* v1.8.3+ */ + + +/*-********************************* +* Simple compression function +***********************************/ + +LZ4FLIB_API int LZ4F_compressionLevel_max(void); /* v1.8.0+ */ + +/*! LZ4F_compressFrameBound() : + * Returns the maximum possible compressed size with LZ4F_compressFrame() given srcSize and preferences. + * `preferencesPtr` is optional. It can be replaced by NULL, in which case, the function will assume default preferences. + * Note : this result is only usable with LZ4F_compressFrame(). + * It may also be relevant to LZ4F_compressUpdate() _only if_ no flush() operation is ever performed. + */ +LZ4FLIB_API size_t LZ4F_compressFrameBound(size_t srcSize, const LZ4F_preferences_t* preferencesPtr); + +/*! LZ4F_compressFrame() : + * Compress srcBuffer content into an LZ4-compressed frame. + * It's a one shot operation, all input content is consumed, and all output is generated. + * + * Note : it's a stateless operation (no LZ4F_cctx state needed). + * In order to reduce load on the allocator, LZ4F_compressFrame(), by default, + * uses the stack to allocate space for the compression state and some table. + * If this usage of the stack is too much for your application, + * consider compiling `lz4frame.c` with compile-time macro LZ4F_HEAPMODE set to 1 instead. + * All state allocations will use the Heap. + * It also means each invocation of LZ4F_compressFrame() will trigger several internal alloc/free invocations. + * + * @dstCapacity MUST be >= LZ4F_compressFrameBound(srcSize, preferencesPtr). + * @preferencesPtr is optional : one can provide NULL, in which case all preferences are set to default. + * @return : number of bytes written into dstBuffer. + * or an error code if it fails (can be tested using LZ4F_isError()) + */ +LZ4FLIB_API size_t LZ4F_compressFrame(void* dstBuffer, size_t dstCapacity, + const void* srcBuffer, size_t srcSize, + const LZ4F_preferences_t* preferencesPtr); + + +/*-*********************************** +* Advanced compression functions +*************************************/ +typedef struct LZ4F_cctx_s LZ4F_cctx; /* incomplete type */ +typedef LZ4F_cctx* LZ4F_compressionContext_t; /* for compatibility with older APIs, prefer using LZ4F_cctx */ + +typedef struct { + unsigned stableSrc; /* 1 == src content will remain present on future calls to LZ4F_compress(); skip copying src content within tmp buffer */ + unsigned reserved[3]; +} LZ4F_compressOptions_t; + +/*--- Resource Management ---*/ + +#define LZ4F_VERSION 100 /* This number can be used to check for an incompatible API breaking change */ +LZ4FLIB_API unsigned LZ4F_getVersion(void); + +/*! LZ4F_createCompressionContext() : + * The first thing to do is to create a compressionContext object, + * which will keep track of operation state during streaming compression. + * This is achieved using LZ4F_createCompressionContext(), which takes as argument a version, + * and a pointer to LZ4F_cctx*, to write the resulting pointer into. + * @version provided MUST be LZ4F_VERSION. It is intended to track potential version mismatch, notably when using DLL. + * The function provides a pointer to a fully allocated LZ4F_cctx object. + * @cctxPtr MUST be != NULL. + * If @return != zero, context creation failed. + * A created compression context can be employed multiple times for consecutive streaming operations. + * Once all streaming compression jobs are completed, + * the state object can be released using LZ4F_freeCompressionContext(). + * Note1 : LZ4F_freeCompressionContext() is always successful. Its return value can be ignored. + * Note2 : LZ4F_freeCompressionContext() works fine with NULL input pointers (do nothing). +**/ +LZ4FLIB_API LZ4F_errorCode_t LZ4F_createCompressionContext(LZ4F_cctx** cctxPtr, unsigned version); +LZ4FLIB_API LZ4F_errorCode_t LZ4F_freeCompressionContext(LZ4F_cctx* cctx); + + +/*---- Compression ----*/ + +#define LZ4F_HEADER_SIZE_MIN 7 /* LZ4 Frame header size can vary, depending on selected parameters */ +#define LZ4F_HEADER_SIZE_MAX 19 + +/* Size in bytes of a block header in little-endian format. Highest bit indicates if block data is uncompressed */ +#define LZ4F_BLOCK_HEADER_SIZE 4 + +/* Size in bytes of a block checksum footer in little-endian format. */ +#define LZ4F_BLOCK_CHECKSUM_SIZE 4 + +/* Size in bytes of the content checksum. */ +#define LZ4F_CONTENT_CHECKSUM_SIZE 4 + +/*! LZ4F_compressBegin() : + * will write the frame header into dstBuffer. + * dstCapacity must be >= LZ4F_HEADER_SIZE_MAX bytes. + * `prefsPtr` is optional : NULL can be provided to set all preferences to default. + * @return : number of bytes written into dstBuffer for the header + * or an error code (which can be tested using LZ4F_isError()) + */ +LZ4FLIB_API size_t LZ4F_compressBegin(LZ4F_cctx* cctx, + void* dstBuffer, size_t dstCapacity, + const LZ4F_preferences_t* prefsPtr); + +/*! LZ4F_compressBound() : + * Provides minimum dstCapacity required to guarantee success of + * LZ4F_compressUpdate(), given a srcSize and preferences, for a worst case scenario. + * When srcSize==0, LZ4F_compressBound() provides an upper bound for LZ4F_flush() and LZ4F_compressEnd() instead. + * Note that the result is only valid for a single invocation of LZ4F_compressUpdate(). + * When invoking LZ4F_compressUpdate() multiple times, + * if the output buffer is gradually filled up instead of emptied and re-used from its start, + * one must check if there is enough remaining capacity before each invocation, using LZ4F_compressBound(). + * @return is always the same for a srcSize and prefsPtr. + * prefsPtr is optional : when NULL is provided, preferences will be set to cover worst case scenario. + * tech details : + * @return if automatic flushing is not enabled, includes the possibility that internal buffer might already be filled by up to (blockSize-1) bytes. + * It also includes frame footer (ending + checksum), since it might be generated by LZ4F_compressEnd(). + * @return doesn't include frame header, as it was already generated by LZ4F_compressBegin(). + */ +LZ4FLIB_API size_t LZ4F_compressBound(size_t srcSize, const LZ4F_preferences_t* prefsPtr); + +/*! LZ4F_compressUpdate() : + * LZ4F_compressUpdate() can be called repetitively to compress as much data as necessary. + * Important rule: dstCapacity MUST be large enough to ensure operation success even in worst case situations. + * This value is provided by LZ4F_compressBound(). + * If this condition is not respected, LZ4F_compress() will fail (result is an errorCode). + * After an error, the state is left in a UB state, and must be re-initialized or freed. + * If previously an uncompressed block was written, buffered data is flushed + * before appending compressed data is continued. + * `cOptPtr` is optional : NULL can be provided, in which case all options are set to default. + * @return : number of bytes written into `dstBuffer` (it can be zero, meaning input data was just buffered). + * or an error code if it fails (which can be tested using LZ4F_isError()) + */ +LZ4FLIB_API size_t LZ4F_compressUpdate(LZ4F_cctx* cctx, + void* dstBuffer, size_t dstCapacity, + const void* srcBuffer, size_t srcSize, + const LZ4F_compressOptions_t* cOptPtr); + +/*! LZ4F_flush() : + * When data must be generated and sent immediately, without waiting for a block to be completely filled, + * it's possible to call LZ4_flush(). It will immediately compress any data buffered within cctx. + * `dstCapacity` must be large enough to ensure the operation will be successful. + * `cOptPtr` is optional : it's possible to provide NULL, all options will be set to default. + * @return : nb of bytes written into dstBuffer (can be zero, when there is no data stored within cctx) + * or an error code if it fails (which can be tested using LZ4F_isError()) + * Note : LZ4F_flush() is guaranteed to be successful when dstCapacity >= LZ4F_compressBound(0, prefsPtr). + */ +LZ4FLIB_API size_t LZ4F_flush(LZ4F_cctx* cctx, + void* dstBuffer, size_t dstCapacity, + const LZ4F_compressOptions_t* cOptPtr); + +/*! LZ4F_compressEnd() : + * To properly finish an LZ4 frame, invoke LZ4F_compressEnd(). + * It will flush whatever data remained within `cctx` (like LZ4_flush()) + * and properly finalize the frame, with an endMark and a checksum. + * `cOptPtr` is optional : NULL can be provided, in which case all options will be set to default. + * @return : nb of bytes written into dstBuffer, necessarily >= 4 (endMark), + * or an error code if it fails (which can be tested using LZ4F_isError()) + * Note : LZ4F_compressEnd() is guaranteed to be successful when dstCapacity >= LZ4F_compressBound(0, prefsPtr). + * A successful call to LZ4F_compressEnd() makes `cctx` available again for another compression task. + */ +LZ4FLIB_API size_t LZ4F_compressEnd(LZ4F_cctx* cctx, + void* dstBuffer, size_t dstCapacity, + const LZ4F_compressOptions_t* cOptPtr); + + +/*-********************************* +* Decompression functions +***********************************/ +typedef struct LZ4F_dctx_s LZ4F_dctx; /* incomplete type */ +typedef LZ4F_dctx* LZ4F_decompressionContext_t; /* compatibility with previous API versions */ + +typedef struct { + unsigned stableDst; /* pledges that last 64KB decompressed data will remain available unmodified between invocations. + * This optimization skips storage operations in tmp buffers. */ + unsigned skipChecksums; /* disable checksum calculation and verification, even when one is present in frame, to save CPU time. + * Setting this option to 1 once disables all checksums for the rest of the frame. */ + unsigned reserved1; /* must be set to zero for forward compatibility */ + unsigned reserved0; /* idem */ +} LZ4F_decompressOptions_t; + + +/* Resource management */ + +/*! LZ4F_createDecompressionContext() : + * Create an LZ4F_dctx object, to track all decompression operations. + * @version provided MUST be LZ4F_VERSION. + * @dctxPtr MUST be valid. + * The function fills @dctxPtr with the value of a pointer to an allocated and initialized LZ4F_dctx object. + * The @return is an errorCode, which can be tested using LZ4F_isError(). + * dctx memory can be released using LZ4F_freeDecompressionContext(); + * Result of LZ4F_freeDecompressionContext() indicates current state of decompressionContext when being released. + * That is, it should be == 0 if decompression has been completed fully and correctly. + */ +LZ4FLIB_API LZ4F_errorCode_t LZ4F_createDecompressionContext(LZ4F_dctx** dctxPtr, unsigned version); +LZ4FLIB_API LZ4F_errorCode_t LZ4F_freeDecompressionContext(LZ4F_dctx* dctx); + + +/*-*********************************** +* Streaming decompression functions +*************************************/ + +#define LZ4F_MAGICNUMBER 0x184D2204U +#define LZ4F_MAGIC_SKIPPABLE_START 0x184D2A50U +#define LZ4F_MIN_SIZE_TO_KNOW_HEADER_LENGTH 5 + +/*! LZ4F_headerSize() : v1.9.0+ + * Provide the header size of a frame starting at `src`. + * `srcSize` must be >= LZ4F_MIN_SIZE_TO_KNOW_HEADER_LENGTH, + * which is enough to decode the header length. + * @return : size of frame header + * or an error code, which can be tested using LZ4F_isError() + * note : Frame header size is variable, but is guaranteed to be + * >= LZ4F_HEADER_SIZE_MIN bytes, and <= LZ4F_HEADER_SIZE_MAX bytes. + */ +LZ4FLIB_API size_t LZ4F_headerSize(const void* src, size_t srcSize); + +/*! LZ4F_getFrameInfo() : + * This function extracts frame parameters (max blockSize, dictID, etc.). + * Its usage is optional: user can also invoke LZ4F_decompress() directly. + * + * Extracted information will fill an existing LZ4F_frameInfo_t structure. + * This can be useful for allocation and dictionary identification purposes. + * + * LZ4F_getFrameInfo() can work in the following situations : + * + * 1) At the beginning of a new frame, before any invocation of LZ4F_decompress(). + * It will decode header from `srcBuffer`, + * consuming the header and starting the decoding process. + * + * Input size must be large enough to contain the full frame header. + * Frame header size can be known beforehand by LZ4F_headerSize(). + * Frame header size is variable, but is guaranteed to be >= LZ4F_HEADER_SIZE_MIN bytes, + * and not more than <= LZ4F_HEADER_SIZE_MAX bytes. + * Hence, blindly providing LZ4F_HEADER_SIZE_MAX bytes or more will always work. + * It's allowed to provide more input data than the header size, + * LZ4F_getFrameInfo() will only consume the header. + * + * If input size is not large enough, + * aka if it's smaller than header size, + * function will fail and return an error code. + * + * 2) After decoding has been started, + * it's possible to invoke LZ4F_getFrameInfo() anytime + * to extract already decoded frame parameters stored within dctx. + * + * Note that, if decoding has barely started, + * and not yet read enough information to decode the header, + * LZ4F_getFrameInfo() will fail. + * + * The number of bytes consumed from srcBuffer will be updated in *srcSizePtr (necessarily <= original value). + * LZ4F_getFrameInfo() only consumes bytes when decoding has not yet started, + * and when decoding the header has been successful. + * Decompression must then resume from (srcBuffer + *srcSizePtr). + * + * @return : a hint about how many srcSize bytes LZ4F_decompress() expects for next call, + * or an error code which can be tested using LZ4F_isError(). + * note 1 : in case of error, dctx is not modified. Decoding operation can resume from beginning safely. + * note 2 : frame parameters are *copied into* an already allocated LZ4F_frameInfo_t structure. + */ +LZ4FLIB_API size_t +LZ4F_getFrameInfo(LZ4F_dctx* dctx, + LZ4F_frameInfo_t* frameInfoPtr, + const void* srcBuffer, size_t* srcSizePtr); + +/*! LZ4F_decompress() : + * Call this function repetitively to regenerate data compressed in `srcBuffer`. + * + * The function requires a valid dctx state. + * It will read up to *srcSizePtr bytes from srcBuffer, + * and decompress data into dstBuffer, of capacity *dstSizePtr. + * + * The nb of bytes consumed from srcBuffer will be written into *srcSizePtr (necessarily <= original value). + * The nb of bytes decompressed into dstBuffer will be written into *dstSizePtr (necessarily <= original value). + * + * The function does not necessarily read all input bytes, so always check value in *srcSizePtr. + * Unconsumed source data must be presented again in subsequent invocations. + * + * `dstBuffer` can freely change between each consecutive function invocation. + * `dstBuffer` content will be overwritten. + * + * @return : an hint of how many `srcSize` bytes LZ4F_decompress() expects for next call. + * Schematically, it's the size of the current (or remaining) compressed block + header of next block. + * Respecting the hint provides some small speed benefit, because it skips intermediate buffers. + * This is just a hint though, it's always possible to provide any srcSize. + * + * When a frame is fully decoded, @return will be 0 (no more data expected). + * When provided with more bytes than necessary to decode a frame, + * LZ4F_decompress() will stop reading exactly at end of current frame, and @return 0. + * + * If decompression failed, @return is an error code, which can be tested using LZ4F_isError(). + * After a decompression error, the `dctx` context is not resumable. + * Use LZ4F_resetDecompressionContext() to return to clean state. + * + * After a frame is fully decoded, dctx can be used again to decompress another frame. + */ +LZ4FLIB_API size_t +LZ4F_decompress(LZ4F_dctx* dctx, + void* dstBuffer, size_t* dstSizePtr, + const void* srcBuffer, size_t* srcSizePtr, + const LZ4F_decompressOptions_t* dOptPtr); + + +/*! LZ4F_resetDecompressionContext() : added in v1.8.0 + * In case of an error, the context is left in "undefined" state. + * In which case, it's necessary to reset it, before re-using it. + * This method can also be used to abruptly stop any unfinished decompression, + * and start a new one using same context resources. */ +LZ4FLIB_API void LZ4F_resetDecompressionContext(LZ4F_dctx* dctx); /* always successful */ + + + +#if defined (__cplusplus) +} +#endif + +#endif /* LZ4F_H_09782039843 */ + +#if defined(LZ4F_STATIC_LINKING_ONLY) && !defined(LZ4F_H_STATIC_09782039843) +#define LZ4F_H_STATIC_09782039843 + +#if defined (__cplusplus) +extern "C" { +#endif + +/* These declarations are not stable and may change in the future. + * They are therefore only safe to depend on + * when the caller is statically linked against the library. + * To access their declarations, define LZ4F_STATIC_LINKING_ONLY. + * + * By default, these symbols aren't published into shared/dynamic libraries. + * You can override this behavior and force them to be published + * by defining LZ4F_PUBLISH_STATIC_FUNCTIONS. + * Use at your own risk. + */ +#ifdef LZ4F_PUBLISH_STATIC_FUNCTIONS +# define LZ4FLIB_STATIC_API LZ4FLIB_API +#else +# define LZ4FLIB_STATIC_API +#endif + + +/* --- Error List --- */ +#define LZ4F_LIST_ERRORS(ITEM) \ + ITEM(OK_NoError) \ + ITEM(ERROR_GENERIC) \ + ITEM(ERROR_maxBlockSize_invalid) \ + ITEM(ERROR_blockMode_invalid) \ + ITEM(ERROR_contentChecksumFlag_invalid) \ + ITEM(ERROR_compressionLevel_invalid) \ + ITEM(ERROR_headerVersion_wrong) \ + ITEM(ERROR_blockChecksum_invalid) \ + ITEM(ERROR_reservedFlag_set) \ + ITEM(ERROR_allocation_failed) \ + ITEM(ERROR_srcSize_tooLarge) \ + ITEM(ERROR_dstMaxSize_tooSmall) \ + ITEM(ERROR_frameHeader_incomplete) \ + ITEM(ERROR_frameType_unknown) \ + ITEM(ERROR_frameSize_wrong) \ + ITEM(ERROR_srcPtr_wrong) \ + ITEM(ERROR_decompressionFailed) \ + ITEM(ERROR_headerChecksum_invalid) \ + ITEM(ERROR_contentChecksum_invalid) \ + ITEM(ERROR_frameDecoding_alreadyStarted) \ + ITEM(ERROR_compressionState_uninitialized) \ + ITEM(ERROR_parameter_null) \ + ITEM(ERROR_maxCode) + +#define LZ4F_GENERATE_ENUM(ENUM) LZ4F_##ENUM, + +/* enum list is exposed, to handle specific errors */ +typedef enum { LZ4F_LIST_ERRORS(LZ4F_GENERATE_ENUM) + _LZ4F_dummy_error_enum_for_c89_never_used } LZ4F_errorCodes; + +LZ4FLIB_STATIC_API LZ4F_errorCodes LZ4F_getErrorCode(size_t functionResult); + + +/*! LZ4F_getBlockSize() : + * Return, in scalar format (size_t), + * the maximum block size associated with blockSizeID. +**/ +LZ4FLIB_STATIC_API size_t LZ4F_getBlockSize(LZ4F_blockSizeID_t blockSizeID); + +/*! LZ4F_uncompressedUpdate() : + * LZ4F_uncompressedUpdate() can be called repetitively to add as much data uncompressed data as necessary. + * Important rule: dstCapacity MUST be large enough to store the entire source buffer as + * no compression is done for this operation + * If this condition is not respected, LZ4F_uncompressedUpdate() will fail (result is an errorCode). + * After an error, the state is left in a UB state, and must be re-initialized or freed. + * If previously a compressed block was written, buffered data is flushed + * before appending uncompressed data is continued. + * This is only supported when LZ4F_blockIndependent is used + * `cOptPtr` is optional : NULL can be provided, in which case all options are set to default. + * @return : number of bytes written into `dstBuffer` (it can be zero, meaning input data was just buffered). + * or an error code if it fails (which can be tested using LZ4F_isError()) + */ +LZ4FLIB_STATIC_API size_t +LZ4F_uncompressedUpdate(LZ4F_cctx* cctx, + void* dstBuffer, size_t dstCapacity, + const void* srcBuffer, size_t srcSize, + const LZ4F_compressOptions_t* cOptPtr); + +/********************************** + * Bulk processing dictionary API + *********************************/ + +/* A Dictionary is useful for the compression of small messages (KB range). + * It dramatically improves compression efficiency. + * + * LZ4 can ingest any input as dictionary, though only the last 64 KB are useful. + * Best results are generally achieved by using Zstandard's Dictionary Builder + * to generate a high-quality dictionary from a set of samples. + * + * Loading a dictionary has a cost, since it involves construction of tables. + * The Bulk processing dictionary API makes it possible to share this cost + * over an arbitrary number of compression jobs, even concurrently, + * markedly improving compression latency for these cases. + * + * The same dictionary will have to be used on the decompression side + * for decoding to be successful. + * To help identify the correct dictionary at decoding stage, + * the frame header allows optional embedding of a dictID field. + */ +typedef struct LZ4F_CDict_s LZ4F_CDict; + +/*! LZ4_createCDict() : + * When compressing multiple messages / blocks using the same dictionary, it's recommended to load it just once. + * LZ4_createCDict() will create a digested dictionary, ready to start future compression operations without startup delay. + * LZ4_CDict can be created once and shared by multiple threads concurrently, since its usage is read-only. + * `dictBuffer` can be released after LZ4_CDict creation, since its content is copied within CDict */ +LZ4FLIB_STATIC_API LZ4F_CDict* LZ4F_createCDict(const void* dictBuffer, size_t dictSize); +LZ4FLIB_STATIC_API void LZ4F_freeCDict(LZ4F_CDict* CDict); + + +/*! LZ4_compressFrame_usingCDict() : + * Compress an entire srcBuffer into a valid LZ4 frame using a digested Dictionary. + * cctx must point to a context created by LZ4F_createCompressionContext(). + * If cdict==NULL, compress without a dictionary. + * dstBuffer MUST be >= LZ4F_compressFrameBound(srcSize, preferencesPtr). + * If this condition is not respected, function will fail (@return an errorCode). + * The LZ4F_preferences_t structure is optional : you may provide NULL as argument, + * but it's not recommended, as it's the only way to provide dictID in the frame header. + * @return : number of bytes written into dstBuffer. + * or an error code if it fails (can be tested using LZ4F_isError()) */ +LZ4FLIB_STATIC_API size_t +LZ4F_compressFrame_usingCDict(LZ4F_cctx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const LZ4F_CDict* cdict, + const LZ4F_preferences_t* preferencesPtr); + + +/*! LZ4F_compressBegin_usingCDict() : + * Inits streaming dictionary compression, and writes the frame header into dstBuffer. + * dstCapacity must be >= LZ4F_HEADER_SIZE_MAX bytes. + * `prefsPtr` is optional : you may provide NULL as argument, + * however, it's the only way to provide dictID in the frame header. + * @return : number of bytes written into dstBuffer for the header, + * or an error code (which can be tested using LZ4F_isError()) */ +LZ4FLIB_STATIC_API size_t +LZ4F_compressBegin_usingCDict(LZ4F_cctx* cctx, + void* dstBuffer, size_t dstCapacity, + const LZ4F_CDict* cdict, + const LZ4F_preferences_t* prefsPtr); + + +/*! LZ4F_decompress_usingDict() : + * Same as LZ4F_decompress(), using a predefined dictionary. + * Dictionary is used "in place", without any preprocessing. +** It must remain accessible throughout the entire frame decoding. */ +LZ4FLIB_STATIC_API size_t +LZ4F_decompress_usingDict(LZ4F_dctx* dctxPtr, + void* dstBuffer, size_t* dstSizePtr, + const void* srcBuffer, size_t* srcSizePtr, + const void* dict, size_t dictSize, + const LZ4F_decompressOptions_t* decompressOptionsPtr); + + +/*! Custom memory allocation : v1.9.4+ + * These prototypes make it possible to pass custom allocation/free functions. + * LZ4F_customMem is provided at state creation time, using LZ4F_create*_advanced() listed below. + * All allocation/free operations will be completed using these custom variants instead of regular ones. + */ +typedef void* (*LZ4F_AllocFunction) (void* opaqueState, size_t size); +typedef void* (*LZ4F_CallocFunction) (void* opaqueState, size_t size); +typedef void (*LZ4F_FreeFunction) (void* opaqueState, void* address); +typedef struct { + LZ4F_AllocFunction customAlloc; + LZ4F_CallocFunction customCalloc; /* optional; when not defined, uses customAlloc + memset */ + LZ4F_FreeFunction customFree; + void* opaqueState; +} LZ4F_CustomMem; +static +#ifdef __GNUC__ +__attribute__((__unused__)) +#endif +LZ4F_CustomMem const LZ4F_defaultCMem = { NULL, NULL, NULL, NULL }; /**< this constant defers to stdlib's functions */ + +LZ4FLIB_STATIC_API LZ4F_cctx* LZ4F_createCompressionContext_advanced(LZ4F_CustomMem customMem, unsigned version); +LZ4FLIB_STATIC_API LZ4F_dctx* LZ4F_createDecompressionContext_advanced(LZ4F_CustomMem customMem, unsigned version); +LZ4FLIB_STATIC_API LZ4F_CDict* LZ4F_createCDict_advanced(LZ4F_CustomMem customMem, const void* dictBuffer, size_t dictSize); + + +#if defined (__cplusplus) +} +#endif + +#endif /* defined(LZ4F_STATIC_LINKING_ONLY) && !defined(LZ4F_H_STATIC_09782039843) */ diff --git a/lz4/include/lz4hc.h b/lz4/include/lz4hc.h new file mode 100644 index 0000000..e937acf --- /dev/null +++ b/lz4/include/lz4hc.h @@ -0,0 +1,413 @@ +/* + LZ4 HC - High Compression Mode of LZ4 + Header File + Copyright (C) 2011-2020, Yann Collet. + BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php) + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above + copyright notice, this list of conditions and the following disclaimer + in the documentation and/or other materials provided with the + distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + You can contact the author at : + - LZ4 source repository : https://github.com/lz4/lz4 + - LZ4 public forum : https://groups.google.com/forum/#!forum/lz4c +*/ +#ifndef LZ4_HC_H_19834876238432 +#define LZ4_HC_H_19834876238432 + +#if defined (__cplusplus) +extern "C" { +#endif + +/* --- Dependency --- */ +/* note : lz4hc requires lz4.h/lz4.c for compilation */ +#include "lz4.h" /* stddef, LZ4LIB_API, LZ4_DEPRECATED */ + + +/* --- Useful constants --- */ +#define LZ4HC_CLEVEL_MIN 3 +#define LZ4HC_CLEVEL_DEFAULT 9 +#define LZ4HC_CLEVEL_OPT_MIN 10 +#define LZ4HC_CLEVEL_MAX 12 + + +/*-************************************ + * Block Compression + **************************************/ +/*! LZ4_compress_HC() : + * Compress data from `src` into `dst`, using the powerful but slower "HC" algorithm. + * `dst` must be already allocated. + * Compression is guaranteed to succeed if `dstCapacity >= LZ4_compressBound(srcSize)` (see "lz4.h") + * Max supported `srcSize` value is LZ4_MAX_INPUT_SIZE (see "lz4.h") + * `compressionLevel` : any value between 1 and LZ4HC_CLEVEL_MAX will work. + * Values > LZ4HC_CLEVEL_MAX behave the same as LZ4HC_CLEVEL_MAX. + * @return : the number of bytes written into 'dst' + * or 0 if compression fails. + */ +LZ4LIB_API int LZ4_compress_HC (const char* src, char* dst, int srcSize, int dstCapacity, int compressionLevel); + + +/* Note : + * Decompression functions are provided within "lz4.h" (BSD license) + */ + + +/*! LZ4_compress_HC_extStateHC() : + * Same as LZ4_compress_HC(), but using an externally allocated memory segment for `state`. + * `state` size is provided by LZ4_sizeofStateHC(). + * Memory segment must be aligned on 8-bytes boundaries (which a normal malloc() should do properly). + */ +LZ4LIB_API int LZ4_sizeofStateHC(void); +LZ4LIB_API int LZ4_compress_HC_extStateHC(void* stateHC, const char* src, char* dst, int srcSize, int maxDstSize, int compressionLevel); + + +/*! LZ4_compress_HC_destSize() : v1.9.0+ + * Will compress as much data as possible from `src` + * to fit into `targetDstSize` budget. + * Result is provided in 2 parts : + * @return : the number of bytes written into 'dst' (necessarily <= targetDstSize) + * or 0 if compression fails. + * `srcSizePtr` : on success, *srcSizePtr is updated to indicate how much bytes were read from `src` + */ +LZ4LIB_API int LZ4_compress_HC_destSize(void* stateHC, + const char* src, char* dst, + int* srcSizePtr, int targetDstSize, + int compressionLevel); + + +/*-************************************ + * Streaming Compression + * Bufferless synchronous API + **************************************/ + typedef union LZ4_streamHC_u LZ4_streamHC_t; /* incomplete type (defined later) */ + +/*! LZ4_createStreamHC() and LZ4_freeStreamHC() : + * These functions create and release memory for LZ4 HC streaming state. + * Newly created states are automatically initialized. + * A same state can be used multiple times consecutively, + * starting with LZ4_resetStreamHC_fast() to start a new stream of blocks. + */ +LZ4LIB_API LZ4_streamHC_t* LZ4_createStreamHC(void); +LZ4LIB_API int LZ4_freeStreamHC (LZ4_streamHC_t* streamHCPtr); + +/* + These functions compress data in successive blocks of any size, + using previous blocks as dictionary, to improve compression ratio. + One key assumption is that previous blocks (up to 64 KB) remain read-accessible while compressing next blocks. + There is an exception for ring buffers, which can be smaller than 64 KB. + Ring-buffer scenario is automatically detected and handled within LZ4_compress_HC_continue(). + + Before starting compression, state must be allocated and properly initialized. + LZ4_createStreamHC() does both, though compression level is set to LZ4HC_CLEVEL_DEFAULT. + + Selecting the compression level can be done with LZ4_resetStreamHC_fast() (starts a new stream) + or LZ4_setCompressionLevel() (anytime, between blocks in the same stream) (experimental). + LZ4_resetStreamHC_fast() only works on states which have been properly initialized at least once, + which is automatically the case when state is created using LZ4_createStreamHC(). + + After reset, a first "fictional block" can be designated as initial dictionary, + using LZ4_loadDictHC() (Optional). + + Invoke LZ4_compress_HC_continue() to compress each successive block. + The number of blocks is unlimited. + Previous input blocks, including initial dictionary when present, + must remain accessible and unmodified during compression. + + It's allowed to update compression level anytime between blocks, + using LZ4_setCompressionLevel() (experimental). + + 'dst' buffer should be sized to handle worst case scenarios + (see LZ4_compressBound(), it ensures compression success). + In case of failure, the API does not guarantee recovery, + so the state _must_ be reset. + To ensure compression success + whenever `dst` buffer size cannot be made >= LZ4_compressBound(), + consider using LZ4_compress_HC_continue_destSize(). + + Whenever previous input blocks can't be preserved unmodified in-place during compression of next blocks, + it's possible to copy the last blocks into a more stable memory space, using LZ4_saveDictHC(). + Return value of LZ4_saveDictHC() is the size of dictionary effectively saved into 'safeBuffer' (<= 64 KB) + + After completing a streaming compression, + it's possible to start a new stream of blocks, using the same LZ4_streamHC_t state, + just by resetting it, using LZ4_resetStreamHC_fast(). +*/ + +LZ4LIB_API void LZ4_resetStreamHC_fast(LZ4_streamHC_t* streamHCPtr, int compressionLevel); /* v1.9.0+ */ +LZ4LIB_API int LZ4_loadDictHC (LZ4_streamHC_t* streamHCPtr, const char* dictionary, int dictSize); + +LZ4LIB_API int LZ4_compress_HC_continue (LZ4_streamHC_t* streamHCPtr, + const char* src, char* dst, + int srcSize, int maxDstSize); + +/*! LZ4_compress_HC_continue_destSize() : v1.9.0+ + * Similar to LZ4_compress_HC_continue(), + * but will read as much data as possible from `src` + * to fit into `targetDstSize` budget. + * Result is provided into 2 parts : + * @return : the number of bytes written into 'dst' (necessarily <= targetDstSize) + * or 0 if compression fails. + * `srcSizePtr` : on success, *srcSizePtr will be updated to indicate how much bytes were read from `src`. + * Note that this function may not consume the entire input. + */ +LZ4LIB_API int LZ4_compress_HC_continue_destSize(LZ4_streamHC_t* LZ4_streamHCPtr, + const char* src, char* dst, + int* srcSizePtr, int targetDstSize); + +LZ4LIB_API int LZ4_saveDictHC (LZ4_streamHC_t* streamHCPtr, char* safeBuffer, int maxDictSize); + + + +/*^********************************************** + * !!!!!! STATIC LINKING ONLY !!!!!! + ***********************************************/ + +/*-****************************************************************** + * PRIVATE DEFINITIONS : + * Do not use these definitions directly. + * They are merely exposed to allow static allocation of `LZ4_streamHC_t`. + * Declare an `LZ4_streamHC_t` directly, rather than any type below. + * Even then, only do so in the context of static linking, as definitions may change between versions. + ********************************************************************/ + +#define LZ4HC_DICTIONARY_LOGSIZE 16 +#define LZ4HC_MAXD (1<= LZ4HC_CLEVEL_OPT_MIN. + */ +LZ4LIB_STATIC_API void LZ4_favorDecompressionSpeed( + LZ4_streamHC_t* LZ4_streamHCPtr, int favor); + +/*! LZ4_resetStreamHC_fast() : v1.9.0+ + * When an LZ4_streamHC_t is known to be in a internally coherent state, + * it can often be prepared for a new compression with almost no work, only + * sometimes falling back to the full, expensive reset that is always required + * when the stream is in an indeterminate state (i.e., the reset performed by + * LZ4_resetStreamHC()). + * + * LZ4_streamHCs are guaranteed to be in a valid state when: + * - returned from LZ4_createStreamHC() + * - reset by LZ4_resetStreamHC() + * - memset(stream, 0, sizeof(LZ4_streamHC_t)) + * - the stream was in a valid state and was reset by LZ4_resetStreamHC_fast() + * - the stream was in a valid state and was then used in any compression call + * that returned success + * - the stream was in an indeterminate state and was used in a compression + * call that fully reset the state (LZ4_compress_HC_extStateHC()) and that + * returned success + * + * Note: + * A stream that was last used in a compression call that returned an error + * may be passed to this function. However, it will be fully reset, which will + * clear any existing history and settings from the context. + */ +LZ4LIB_STATIC_API void LZ4_resetStreamHC_fast( + LZ4_streamHC_t* LZ4_streamHCPtr, int compressionLevel); + +/*! LZ4_compress_HC_extStateHC_fastReset() : + * A variant of LZ4_compress_HC_extStateHC(). + * + * Using this variant avoids an expensive initialization step. It is only safe + * to call if the state buffer is known to be correctly initialized already + * (see above comment on LZ4_resetStreamHC_fast() for a definition of + * "correctly initialized"). From a high level, the difference is that this + * function initializes the provided state with a call to + * LZ4_resetStreamHC_fast() while LZ4_compress_HC_extStateHC() starts with a + * call to LZ4_resetStreamHC(). + */ +LZ4LIB_STATIC_API int LZ4_compress_HC_extStateHC_fastReset ( + void* state, + const char* src, char* dst, + int srcSize, int dstCapacity, + int compressionLevel); + +/*! LZ4_attach_HC_dictionary() : + * This is an experimental API that allows for the efficient use of a + * static dictionary many times. + * + * Rather than re-loading the dictionary buffer into a working context before + * each compression, or copying a pre-loaded dictionary's LZ4_streamHC_t into a + * working LZ4_streamHC_t, this function introduces a no-copy setup mechanism, + * in which the working stream references the dictionary stream in-place. + * + * Several assumptions are made about the state of the dictionary stream. + * Currently, only streams which have been prepared by LZ4_loadDictHC() should + * be expected to work. + * + * Alternatively, the provided dictionary stream pointer may be NULL, in which + * case any existing dictionary stream is unset. + * + * A dictionary should only be attached to a stream without any history (i.e., + * a stream that has just been reset). + * + * The dictionary will remain attached to the working stream only for the + * current stream session. Calls to LZ4_resetStreamHC(_fast) will remove the + * dictionary context association from the working stream. The dictionary + * stream (and source buffer) must remain in-place / accessible / unchanged + * through the lifetime of the stream session. + */ +LZ4LIB_STATIC_API void LZ4_attach_HC_dictionary( + LZ4_streamHC_t *working_stream, + const LZ4_streamHC_t *dictionary_stream); + +#if defined (__cplusplus) +} +#endif + +#endif /* LZ4_HC_SLO_098092834 */ +#endif /* LZ4_HC_STATIC_LINKING_ONLY */ diff --git a/lz4/lib/cmake/lz4/lz4Config.cmake b/lz4/lib/cmake/lz4/lz4Config.cmake new file mode 100644 index 0000000..2911d4b --- /dev/null +++ b/lz4/lib/cmake/lz4/lz4Config.cmake @@ -0,0 +1,26 @@ + +####### Expanded from @PACKAGE_INIT@ by configure_package_config_file() ####### +####### Any changes to this file will be overwritten by the next CMake run #### +####### The input file was lz4Config.cmake.in ######## + +get_filename_component(PACKAGE_PREFIX_DIR "${CMAKE_CURRENT_LIST_DIR}/../../../" ABSOLUTE) + +macro(set_and_check _var _file) + set(${_var} "${_file}") + if(NOT EXISTS "${_file}") + message(FATAL_ERROR "File or directory ${_file} referenced by variable ${_var} does not exist !") + endif() +endmacro() + +macro(check_required_components _NAME) + foreach(comp ${${_NAME}_FIND_COMPONENTS}) + if(NOT ${_NAME}_${comp}_FOUND) + if(${_NAME}_FIND_REQUIRED_${comp}) + set(${_NAME}_FOUND FALSE) + endif() + endif() + endforeach() +endmacro() + +#################################################################################### +include( "${CMAKE_CURRENT_LIST_DIR}/lz4Targets.cmake" ) diff --git a/lz4/lib/cmake/lz4/lz4ConfigVersion.cmake b/lz4/lib/cmake/lz4/lz4ConfigVersion.cmake new file mode 100644 index 0000000..75a3c6d --- /dev/null +++ b/lz4/lib/cmake/lz4/lz4ConfigVersion.cmake @@ -0,0 +1,70 @@ +# This is a basic version file for the Config-mode of find_package(). +# It is used by write_basic_package_version_file() as input file for configure_file() +# to create a version-file which can be installed along a config.cmake file. +# +# The created file sets PACKAGE_VERSION_EXACT if the current version string and +# the requested version string are exactly the same and it sets +# PACKAGE_VERSION_COMPATIBLE if the current version is >= requested version, +# but only if the requested major version is the same as the current one. +# The variable CVF_VERSION must be set before calling configure_file(). + + +set(PACKAGE_VERSION "1.9.4") + +if(PACKAGE_VERSION VERSION_LESS PACKAGE_FIND_VERSION) + set(PACKAGE_VERSION_COMPATIBLE FALSE) +else() + + if("1.9.4" MATCHES "^([0-9]+)\\.") + set(CVF_VERSION_MAJOR "${CMAKE_MATCH_1}") + if(NOT CVF_VERSION_MAJOR VERSION_EQUAL 0) + string(REGEX REPLACE "^0+" "" CVF_VERSION_MAJOR "${CVF_VERSION_MAJOR}") + endif() + else() + set(CVF_VERSION_MAJOR "1.9.4") + endif() + + if(PACKAGE_FIND_VERSION_RANGE) + # both endpoints of the range must have the expected major version + math (EXPR CVF_VERSION_MAJOR_NEXT "${CVF_VERSION_MAJOR} + 1") + if (NOT PACKAGE_FIND_VERSION_MIN_MAJOR STREQUAL CVF_VERSION_MAJOR + OR ((PACKAGE_FIND_VERSION_RANGE_MAX STREQUAL "INCLUDE" AND NOT PACKAGE_FIND_VERSION_MAX_MAJOR STREQUAL CVF_VERSION_MAJOR) + OR (PACKAGE_FIND_VERSION_RANGE_MAX STREQUAL "EXCLUDE" AND NOT PACKAGE_FIND_VERSION_MAX VERSION_LESS_EQUAL CVF_VERSION_MAJOR_NEXT))) + set(PACKAGE_VERSION_COMPATIBLE FALSE) + elseif(PACKAGE_FIND_VERSION_MIN_MAJOR STREQUAL CVF_VERSION_MAJOR + AND ((PACKAGE_FIND_VERSION_RANGE_MAX STREQUAL "INCLUDE" AND PACKAGE_VERSION VERSION_LESS_EQUAL PACKAGE_FIND_VERSION_MAX) + OR (PACKAGE_FIND_VERSION_RANGE_MAX STREQUAL "EXCLUDE" AND PACKAGE_VERSION VERSION_LESS PACKAGE_FIND_VERSION_MAX))) + set(PACKAGE_VERSION_COMPATIBLE TRUE) + else() + set(PACKAGE_VERSION_COMPATIBLE FALSE) + endif() + else() + if(PACKAGE_FIND_VERSION_MAJOR STREQUAL CVF_VERSION_MAJOR) + set(PACKAGE_VERSION_COMPATIBLE TRUE) + else() + set(PACKAGE_VERSION_COMPATIBLE FALSE) + endif() + + if(PACKAGE_FIND_VERSION STREQUAL PACKAGE_VERSION) + set(PACKAGE_VERSION_EXACT TRUE) + endif() + endif() +endif() + + +# if the installed project requested no architecture check, don't perform the check +if("FALSE") + return() +endif() + +# if the installed or the using project don't have CMAKE_SIZEOF_VOID_P set, ignore it: +if("${CMAKE_SIZEOF_VOID_P}" STREQUAL "" OR "8" STREQUAL "") + return() +endif() + +# check that the installed version has the same 32/64bit-ness as the one which is currently searching: +if(NOT CMAKE_SIZEOF_VOID_P STREQUAL "8") + math(EXPR installedBits "8 * 8") + set(PACKAGE_VERSION "${PACKAGE_VERSION} (${installedBits}bit)") + set(PACKAGE_VERSION_UNSUITABLE TRUE) +endif() diff --git a/lz4/lib/cmake/lz4/lz4Targets-release.cmake b/lz4/lib/cmake/lz4/lz4Targets-release.cmake new file mode 100644 index 0000000..654d0e3 --- /dev/null +++ b/lz4/lib/cmake/lz4/lz4Targets-release.cmake @@ -0,0 +1,29 @@ +#---------------------------------------------------------------- +# Generated CMake target import file for configuration "Release". +#---------------------------------------------------------------- + +# Commands may need to know the format version. +set(CMAKE_IMPORT_FILE_VERSION 1) + +# Import target "LZ4::lz4_shared" for configuration "Release" +set_property(TARGET LZ4::lz4_shared APPEND PROPERTY IMPORTED_CONFIGURATIONS RELEASE) +set_target_properties(LZ4::lz4_shared PROPERTIES + IMPORTED_IMPLIB_RELEASE "${_IMPORT_PREFIX}/lib/lz4.lib" + IMPORTED_LOCATION_RELEASE "${_IMPORT_PREFIX}/bin/lz4.dll" + ) + +list(APPEND _IMPORT_CHECK_TARGETS LZ4::lz4_shared ) +list(APPEND _IMPORT_CHECK_FILES_FOR_LZ4::lz4_shared "${_IMPORT_PREFIX}/lib/lz4.lib" "${_IMPORT_PREFIX}/bin/lz4.dll" ) + +# Import target "LZ4::lz4_static" for configuration "Release" +set_property(TARGET LZ4::lz4_static APPEND PROPERTY IMPORTED_CONFIGURATIONS RELEASE) +set_target_properties(LZ4::lz4_static PROPERTIES + IMPORTED_LINK_INTERFACE_LANGUAGES_RELEASE "C" + IMPORTED_LOCATION_RELEASE "${_IMPORT_PREFIX}/lib/lz4_static.lib" + ) + +list(APPEND _IMPORT_CHECK_TARGETS LZ4::lz4_static ) +list(APPEND _IMPORT_CHECK_FILES_FOR_LZ4::lz4_static "${_IMPORT_PREFIX}/lib/lz4_static.lib" ) + +# Commands beyond this point should not need to know the version. +set(CMAKE_IMPORT_FILE_VERSION) diff --git a/lz4/lib/cmake/lz4/lz4Targets.cmake b/lz4/lib/cmake/lz4/lz4Targets.cmake new file mode 100644 index 0000000..27e5fe1 --- /dev/null +++ b/lz4/lib/cmake/lz4/lz4Targets.cmake @@ -0,0 +1,101 @@ +# Generated by CMake + +if("${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}" LESS 2.5) + message(FATAL_ERROR "CMake >= 2.6.0 required") +endif() +cmake_policy(PUSH) +cmake_policy(VERSION 2.6...3.19) +#---------------------------------------------------------------- +# Generated CMake target import file. +#---------------------------------------------------------------- + +# Commands may need to know the format version. +set(CMAKE_IMPORT_FILE_VERSION 1) + +# Protect against multiple inclusion, which would fail when already imported targets are added once more. +set(_targetsDefined) +set(_targetsNotDefined) +set(_expectedTargets) +foreach(_expectedTarget LZ4::lz4_shared LZ4::lz4_static) + list(APPEND _expectedTargets ${_expectedTarget}) + if(NOT TARGET ${_expectedTarget}) + list(APPEND _targetsNotDefined ${_expectedTarget}) + endif() + if(TARGET ${_expectedTarget}) + list(APPEND _targetsDefined ${_expectedTarget}) + endif() +endforeach() +if("${_targetsDefined}" STREQUAL "${_expectedTargets}") + unset(_targetsDefined) + unset(_targetsNotDefined) + unset(_expectedTargets) + set(CMAKE_IMPORT_FILE_VERSION) + cmake_policy(POP) + return() +endif() +if(NOT "${_targetsDefined}" STREQUAL "") + message(FATAL_ERROR "Some (but not all) targets in this export set were already defined.\nTargets Defined: ${_targetsDefined}\nTargets not yet defined: ${_targetsNotDefined}\n") +endif() +unset(_targetsDefined) +unset(_targetsNotDefined) +unset(_expectedTargets) + + +# Compute the installation prefix relative to this file. +get_filename_component(_IMPORT_PREFIX "${CMAKE_CURRENT_LIST_FILE}" PATH) +get_filename_component(_IMPORT_PREFIX "${_IMPORT_PREFIX}" PATH) +get_filename_component(_IMPORT_PREFIX "${_IMPORT_PREFIX}" PATH) +get_filename_component(_IMPORT_PREFIX "${_IMPORT_PREFIX}" PATH) +if(_IMPORT_PREFIX STREQUAL "/") + set(_IMPORT_PREFIX "") +endif() + +# Create imported target LZ4::lz4_shared +add_library(LZ4::lz4_shared SHARED IMPORTED) + +set_target_properties(LZ4::lz4_shared PROPERTIES + INTERFACE_INCLUDE_DIRECTORIES "${_IMPORT_PREFIX}/include" +) + +# Create imported target LZ4::lz4_static +add_library(LZ4::lz4_static STATIC IMPORTED) + +set_target_properties(LZ4::lz4_static PROPERTIES + INTERFACE_INCLUDE_DIRECTORIES "${_IMPORT_PREFIX}/include" +) + +# Load information for each installed configuration. +get_filename_component(_DIR "${CMAKE_CURRENT_LIST_FILE}" PATH) +file(GLOB CONFIG_FILES "${_DIR}/lz4Targets-*.cmake") +foreach(f ${CONFIG_FILES}) + include(${f}) +endforeach() + +# Cleanup temporary variables. +set(_IMPORT_PREFIX) + +# Loop over all imported files and verify that they actually exist +foreach(target ${_IMPORT_CHECK_TARGETS} ) + foreach(file ${_IMPORT_CHECK_FILES_FOR_${target}} ) + if(NOT EXISTS "${file}" ) + message(FATAL_ERROR "The imported target \"${target}\" references the file + \"${file}\" +but this file does not exist. Possible reasons include: +* The file was deleted, renamed, or moved to another location. +* An install or uninstall procedure did not complete successfully. +* The installation package was faulty and contained + \"${CMAKE_CURRENT_LIST_FILE}\" +but not all the files it references. +") + endif() + endforeach() + unset(_IMPORT_CHECK_FILES_FOR_${target}) +endforeach() +unset(_IMPORT_CHECK_TARGETS) + +# This file does not depend on other imported targets which have +# been exported from the same project but in a separate export set. + +# Commands beyond this point should not need to know the version. +set(CMAKE_IMPORT_FILE_VERSION) +cmake_policy(POP) diff --git a/lz4/lib/pkgconfig/liblz4.pc b/lz4/lib/pkgconfig/liblz4.pc new file mode 100644 index 0000000..8330f11 --- /dev/null +++ b/lz4/lib/pkgconfig/liblz4.pc @@ -0,0 +1,14 @@ +# LZ4 - Fast LZ compression algorithm +# Copyright (C) 2011-2020, Yann Collet. +# BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php) + +prefix=C:/Program Files (x86)/LZ4 +libdir=${prefix}/lib +includedir=${prefix}/include + +Name: lz4 +Description: extremely fast lossless compression algorithm library +URL: http://www.lz4.org/ +Version: 1.9.4 +Libs: -L${libdir} -llz4 +Cflags: -I${includedir} diff --git a/zlib/include/zconf.h b/zlib/include/zconf.h new file mode 100644 index 0000000..352f552 --- /dev/null +++ b/zlib/include/zconf.h @@ -0,0 +1,536 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H +/* #undef Z_PREFIX */ +/* #undef Z_HAVE_UNISTD_H */ + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + * Even better than compiling with -DZ_PREFIX would be to use configure to set + * this permanently in zconf.h using "./configure --zprefix". + */ +#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ +# define Z_PREFIX_SET + +/* all linked symbols and init macros */ +# define _dist_code z__dist_code +# define _length_code z__length_code +# define _tr_align z__tr_align +# define _tr_flush_bits z__tr_flush_bits +# define _tr_flush_block z__tr_flush_block +# define _tr_init z__tr_init +# define _tr_stored_block z__tr_stored_block +# define _tr_tally z__tr_tally +# define adler32 z_adler32 +# define adler32_combine z_adler32_combine +# define adler32_combine64 z_adler32_combine64 +# define adler32_z z_adler32_z +# ifndef Z_SOLO +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# endif +# define crc32 z_crc32 +# define crc32_combine z_crc32_combine +# define crc32_combine64 z_crc32_combine64 +# define crc32_z z_crc32_z +# define deflate z_deflate +# define deflateBound z_deflateBound +# define deflateCopy z_deflateCopy +# define deflateEnd z_deflateEnd +# define deflateGetDictionary z_deflateGetDictionary +# define deflateInit z_deflateInit +# define deflateInit2 z_deflateInit2 +# define deflateInit2_ z_deflateInit2_ +# define deflateInit_ z_deflateInit_ +# define deflateParams z_deflateParams +# define deflatePending z_deflatePending +# define deflatePrime z_deflatePrime +# define deflateReset z_deflateReset +# define deflateResetKeep z_deflateResetKeep +# define deflateSetDictionary z_deflateSetDictionary +# define deflateSetHeader z_deflateSetHeader +# define deflateTune z_deflateTune +# define deflate_copyright z_deflate_copyright +# define get_crc_table z_get_crc_table +# ifndef Z_SOLO +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzfread z_gzfread +# define gzfwrite z_gzfwrite +# define gzgetc z_gzgetc +# define gzgetc_ z_gzgetc_ +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# ifdef _WIN32 +# define gzopen_w z_gzopen_w +# endif +# define gzprintf z_gzprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzvprintf z_gzvprintf +# define gzwrite z_gzwrite +# endif +# define inflate z_inflate +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define inflateBackInit z_inflateBackInit +# define inflateBackInit_ z_inflateBackInit_ +# define inflateCodesUsed z_inflateCodesUsed +# define inflateCopy z_inflateCopy +# define inflateEnd z_inflateEnd +# define inflateGetDictionary z_inflateGetDictionary +# define inflateGetHeader z_inflateGetHeader +# define inflateInit z_inflateInit +# define inflateInit2 z_inflateInit2 +# define inflateInit2_ z_inflateInit2_ +# define inflateInit_ z_inflateInit_ +# define inflateMark z_inflateMark +# define inflatePrime z_inflatePrime +# define inflateReset z_inflateReset +# define inflateReset2 z_inflateReset2 +# define inflateResetKeep z_inflateResetKeep +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateUndermine z_inflateUndermine +# define inflateValidate z_inflateValidate +# define inflate_copyright z_inflate_copyright +# define inflate_fast z_inflate_fast +# define inflate_table z_inflate_table +# ifndef Z_SOLO +# define uncompress z_uncompress +# define uncompress2 z_uncompress2 +# endif +# define zError z_zError +# ifndef Z_SOLO +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# endif +# define zlibCompileFlags z_zlibCompileFlags +# define zlibVersion z_zlibVersion + +/* all zlib typedefs in zlib.h and zconf.h */ +# define Byte z_Byte +# define Bytef z_Bytef +# define alloc_func z_alloc_func +# define charf z_charf +# define free_func z_free_func +# ifndef Z_SOLO +# define gzFile z_gzFile +# endif +# define gz_header z_gz_header +# define gz_headerp z_gz_headerp +# define in_func z_in_func +# define intf z_intf +# define out_func z_out_func +# define uInt z_uInt +# define uIntf z_uIntf +# define uLong z_uLong +# define uLongf z_uLongf +# define voidp z_voidp +# define voidpc z_voidpc +# define voidpf z_voidpf + +/* all zlib structs in zlib.h and zconf.h */ +# define gz_header_s z_gz_header_s +# define internal_state z_internal_state + +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +#if defined(ZLIB_CONST) && !defined(z_const) +# define z_const const +#else +# define z_const +#endif + +#ifdef Z_SOLO + typedef unsigned long z_size_t; +#else +# define z_longlong long long +# if defined(NO_SIZE_T) + typedef unsigned NO_SIZE_T z_size_t; +# elif defined(STDC) +# include + typedef size_t z_size_t; +# else + typedef unsigned long z_size_t; +# endif +# undef z_longlong +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus about 7 kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +#ifndef Z_ARG /* function prototypes for stdarg */ +# if defined(STDC) || defined(Z_HAVE_STDARG_H) +# define Z_ARG(args) args +# else +# define Z_ARG(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +# include +# if (UINT_MAX == 0xffffffffUL) +# define Z_U4 unsigned +# elif (ULONG_MAX == 0xffffffffUL) +# define Z_U4 unsigned long +# elif (USHRT_MAX == 0xffffffffUL) +# define Z_U4 unsigned short +# endif +#endif + +#ifdef Z_U4 + typedef Z_U4 z_crc_t; +#else + typedef unsigned long z_crc_t; +#endif + +#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_UNISTD_H +#endif + +#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_STDARG_H +#endif + +#ifdef STDC +# ifndef Z_SOLO +# include /* for off_t */ +# endif +#endif + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +# include /* for va_list */ +# endif +#endif + +#ifdef _WIN32 +# ifndef Z_SOLO +# include /* for wchar_t */ +# endif +#endif + +/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and + * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even + * though the former does not conform to the LFS document), but considering + * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as + * equivalently requesting no 64-bit operations + */ +#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 +# undef _LARGEFILE64_SOURCE +#endif + +#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H) +# define Z_HAVE_UNISTD_H +#endif +#ifndef Z_SOLO +# if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif +# endif +#endif + +#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 +# define Z_LFS64 +#endif + +#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) +# define Z_LARGE64 +#endif + +#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) +# define Z_WANT64 +#endif + +#if !defined(SEEK_SET) && !defined(Z_SOLO) +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#ifndef z_off_t +# define z_off_t long +#endif + +#if !defined(_WIN32) && defined(Z_LARGE64) +# define z_off64_t off64_t +#else +# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO) +# define z_off64_t __int64 +# else +# define z_off64_t z_off_t +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) + #pragma map(deflateInit_,"DEIN") + #pragma map(deflateInit2_,"DEIN2") + #pragma map(deflateEnd,"DEEND") + #pragma map(deflateBound,"DEBND") + #pragma map(inflateInit_,"ININ") + #pragma map(inflateInit2_,"ININ2") + #pragma map(inflateEnd,"INEND") + #pragma map(inflateSync,"INSY") + #pragma map(inflateSetDictionary,"INSEDI") + #pragma map(compressBound,"CMBND") + #pragma map(inflate_table,"INTABL") + #pragma map(inflate_fast,"INFA") + #pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/zlib/include/zlib.h b/zlib/include/zlib.h new file mode 100644 index 0000000..f09cdaf --- /dev/null +++ b/zlib/include/zlib.h @@ -0,0 +1,1912 @@ +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.2.11, January 15th, 2017 + + Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950 + (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format). +*/ + +#ifndef ZLIB_H +#define ZLIB_H + +#include "zconf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ZLIB_VERSION "1.2.11" +#define ZLIB_VERNUM 0x12b0 +#define ZLIB_VER_MAJOR 1 +#define ZLIB_VER_MINOR 2 +#define ZLIB_VER_REVISION 11 +#define ZLIB_VER_SUBREVISION 0 + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed data. + This version of the library supports only one compression method (deflation) + but other algorithms will be added later and will have the same stream + interface. + + Compression can be done in a single step if the buffers are large enough, + or can be done by repeated calls of the compression function. In the latter + case, the application must provide more input and/or consume the output + (providing more output space) before each call. + + The compressed data format used by default by the in-memory functions is + the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped + around a deflate stream, which is itself documented in RFC 1951. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio using the functions that start + with "gz". The gzip format is different from the zlib format. gzip is a + gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. + + This library can optionally read and write gzip and raw deflate streams in + memory as well. + + The zlib format was designed to be compact and fast for use in memory + and on communications channels. The gzip format was designed for single- + file compression on file systems, has a larger header than zlib to maintain + directory information, and uses a different, slower check method than zlib. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never crash + even in the case of corrupted input. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address)); + +struct internal_state; + +typedef struct z_stream_s { + z_const Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total number of input bytes read so far */ + + Bytef *next_out; /* next output byte will go here */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total number of bytes output so far */ + + z_const char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: binary or text + for deflate, or the decoding state for inflate */ + uLong adler; /* Adler-32 or CRC-32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream FAR *z_streamp; + +/* + gzip header information passed to and from zlib routines. See RFC 1952 + for more details on the meanings of these fields. +*/ +typedef struct gz_header_s { + int text; /* true if compressed data believed to be text */ + uLong time; /* modification time */ + int xflags; /* extra flags (not used when writing a gzip file) */ + int os; /* operating system */ + Bytef *extra; /* pointer to extra field or Z_NULL if none */ + uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ + uInt extra_max; /* space at extra (only when reading header) */ + Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ + uInt name_max; /* space at name (only when reading header) */ + Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ + uInt comm_max; /* space at comment (only when reading header) */ + int hcrc; /* true if there was or will be a header crc */ + int done; /* true when done reading gzip header (not used + when writing a gzip file) */ +} gz_header; + +typedef gz_header FAR *gz_headerp; + +/* + The application must update next_in and avail_in when avail_in has dropped + to zero. It must update next_out and avail_out when avail_out has dropped + to zero. The application must initialize zalloc, zfree and opaque before + calling the init function. All other fields are set by the compression + library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. In that case, zlib is thread-safe. When zalloc and zfree are + Z_NULL on entry to the initialization function, they are set to internal + routines that use the standard library functions malloc() and free(). + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this if + the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers + returned by zalloc for objects of exactly 65536 bytes *must* have their + offset normalized to zero. The default allocation function provided by this + library ensures this (see zutil.c). To reduce memory requirements and avoid + any allocation of 64K objects, at the expense of compression ratio, compile + the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or progress + reports. After compression, total_in holds the total size of the + uncompressed data and may be saved for use by the decompressor (particularly + if the decompressor wants to decompress everything in a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +#define Z_BLOCK 5 +#define Z_TREES 6 +/* Allowed flush values; see deflate() and inflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative values + * are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_RLE 3 +#define Z_FIXED 4 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_TEXT 1 +#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ +#define Z_UNKNOWN 2 +/* Possible values of the data_type field for deflate() */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + + /* basic functions */ + +ZEXTERN const char * ZEXPORT zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is not + compatible with the zlib.h header file used by the application. This check + is automatically made by deflateInit and inflateInit. + */ + +/* +ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. If + zalloc and zfree are set to Z_NULL, deflateInit updates them to use default + allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at all + (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION + requests a default compromise between speed and compression (currently + equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if level is not a valid compression level, or + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). msg is set to null + if there is no error message. deflateInit does not perform any compression: + this will be done by deflate(). +*/ + + +ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Generate more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary. Some output may be provided even if + flush is zero. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming more + output, and updating avail_in or avail_out accordingly; avail_out should + never be zero before the call. The application can consume the compressed + output when it wants, for example when the output buffer is full (avail_out + == 0), or after each call of deflate(). If deflate returns Z_OK and with + zero avail_out, it must be called again after making room in the output + buffer because there might be more output pending. See deflatePending(), + which can be used if desired to determine whether or not there is more ouput + in that case. + + Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to + decide how much data to accumulate before producing output, in order to + maximize compression. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In + particular avail_in is zero after the call if enough output space has been + provided before the call.) Flushing may degrade compression for some + compression algorithms and so it should be used only when necessary. This + completes the current deflate block and follows it with an empty stored block + that is three bits plus filler bits to the next byte, followed by four bytes + (00 00 ff ff). + + If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the + output buffer, but the output is not aligned to a byte boundary. All of the + input data so far will be available to the decompressor, as for Z_SYNC_FLUSH. + This completes the current deflate block and follows it with an empty fixed + codes block that is 10 bits long. This assures that enough bytes are output + in order for the decompressor to finish the block before the empty fixed + codes block. + + If flush is set to Z_BLOCK, a deflate block is completed and emitted, as + for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to + seven bits of the current block are held to be written as the next byte after + the next deflate block is completed. In this case, the decompressor may not + be provided enough bits at this point in order to complete decompression of + the data provided so far to the compressor. It may need to wait for the next + block to be emitted. This is for advanced applications that need to control + the emission of deflate blocks. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that + avail_out is greater than six to avoid repeated flush markers due to + avail_out == 0 on return. + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there was + enough output space. If deflate returns with Z_OK or Z_BUF_ERROR, this + function must be called again with Z_FINISH and more output space (updated + avail_out) but no more input data, until it returns with Z_STREAM_END or an + error. After deflate has returned Z_STREAM_END, the only possible operations + on the stream are deflateReset or deflateEnd. + + Z_FINISH can be used in the first deflate call after deflateInit if all the + compression is to be done in a single step. In order to complete in one + call, avail_out must be at least the value returned by deflateBound (see + below). Then deflate is guaranteed to return Z_STREAM_END. If not enough + output space is provided, deflate will not return Z_STREAM_END, and it must + be called again as described above. + + deflate() sets strm->adler to the Adler-32 checksum of all input read + so far (that is, total_in bytes). If a gzip stream is being generated, then + strm->adler will be the CRC-32 checksum of the input read so far. (See + deflateInit2 below.) + + deflate() may update strm->data_type if it can make a good guess about + the input data type (Z_BINARY or Z_TEXT). If in doubt, the data is + considered binary. This field is only for information purposes and does not + affect the compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was Z_NULL or the state was inadvertently written over + by the application), or Z_BUF_ERROR if no progress is possible (for example + avail_in or avail_out was zero). Note that Z_BUF_ERROR is not fatal, and + deflate() can be called again with more input and more output space to + continue compressing. +*/ + + +ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any pending + output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, msg + may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. In the current version of inflate, the provided input is not + read or consumed. The allocation of a sliding window will be deferred to + the first call of inflate (if the decompression does not complete on the + first call). If zalloc and zfree are set to Z_NULL, inflateInit updates + them to use default allocation functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller, or Z_STREAM_ERROR if the parameters are + invalid, such as a null pointer to the structure. msg is set to null if + there is no error message. inflateInit does not perform any decompression. + Actual decompression will be done by inflate(). So next_in, and avail_in, + next_out, and avail_out are unused and unchanged. The current + implementation of inflateInit() does not process any header information -- + that is deferred until inflate() is called. +*/ + + +ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), then next_in and avail_in are updated + accordingly, and processing will resume at this point for the next call of + inflate(). + + - Generate more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there is + no more input data or no more space in the output buffer (see below about + the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming more + output, and updating the next_* and avail_* values accordingly. If the + caller of inflate() does not provide both available input and available + output space, it is possible that there will be no progress made. The + application can consume the uncompressed output when it wants, for example + when the output buffer is full (avail_out == 0), or after each call of + inflate(). If inflate returns Z_OK and with zero avail_out, it must be + called again after making room in the output buffer because there might be + more output pending. + + The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH, + Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much + output as possible to the output buffer. Z_BLOCK requests that inflate() + stop if and when it gets to the next deflate block boundary. When decoding + the zlib or gzip format, this will cause inflate() to return immediately + after the header and before the first block. When doing a raw inflate, + inflate() will go ahead and process the first block, and will return when it + gets to the end of that block, or when it runs out of data. + + The Z_BLOCK option assists in appending to or combining deflate streams. + To assist in this, on return inflate() always sets strm->data_type to the + number of unused bits in the last byte taken from strm->next_in, plus 64 if + inflate() is currently decoding the last block in the deflate stream, plus + 128 if inflate() returned immediately after decoding an end-of-block code or + decoding the complete header up to just before the first byte of the deflate + stream. The end-of-block will not be indicated until all of the uncompressed + data from that block has been written to strm->next_out. The number of + unused bits may in general be greater than seven, except when bit 7 of + data_type is set, in which case the number of unused bits will be less than + eight. data_type is set as noted here every time inflate() returns for all + flush options, and so can be used to determine the amount of currently + consumed input in bits. + + The Z_TREES option behaves as Z_BLOCK does, but it also returns when the + end of each deflate block header is reached, before any actual data in that + block is decoded. This allows the caller to determine the length of the + deflate block header for later use in random access within a deflate block. + 256 is added to the value of strm->data_type when inflate() returns + immediately after reaching the end of the deflate block header. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step (a + single call of inflate), the parameter flush should be set to Z_FINISH. In + this case all pending input is processed and all pending output is flushed; + avail_out must be large enough to hold all of the uncompressed data for the + operation to complete. (The size of the uncompressed data may have been + saved by the compressor for this purpose.) The use of Z_FINISH is not + required to perform an inflation in one step. However it may be used to + inform inflate that a faster approach can be used for the single inflate() + call. Z_FINISH also informs inflate to not maintain a sliding window if the + stream completes, which reduces inflate's memory footprint. If the stream + does not complete, either because not all of the stream is provided or not + enough output space is provided, then a sliding window will be allocated and + inflate() can be called again to continue the operation as if Z_NO_FLUSH had + been used. + + In this implementation, inflate() always flushes as much output as + possible to the output buffer, and always uses the faster approach on the + first call. So the effects of the flush parameter in this implementation are + on the return value of inflate() as noted below, when inflate() returns early + when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of + memory for a sliding window when Z_FINISH is used. + + If a preset dictionary is needed after this call (see inflateSetDictionary + below), inflate sets strm->adler to the Adler-32 checksum of the dictionary + chosen by the compressor and returns Z_NEED_DICT; otherwise it sets + strm->adler to the Adler-32 checksum of all output produced so far (that is, + total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described + below. At the end of the stream, inflate() checks that its computed Adler-32 + checksum is equal to that saved by the compressor and returns Z_STREAM_END + only if the checksum is correct. + + inflate() can decompress and check either zlib-wrapped or gzip-wrapped + deflate data. The header type is detected automatically, if requested when + initializing with inflateInit2(). Any information contained in the gzip + header is not retained unless inflateGetHeader() is used. When processing + gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output + produced so far. The CRC-32 is checked against the gzip trailer, as is the + uncompressed length, modulo 2^32. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect check + value, in which case strm->msg points to a string with a more specific + error), Z_STREAM_ERROR if the stream structure was inconsistent (for example + next_in or next_out was Z_NULL, or the state was inadvertently written over + by the application), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR + if no progress was possible or if there was not enough room in the output + buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and + inflate() can be called again with more input and more output space to + continue decompressing. If Z_DATA_ERROR is returned, the application may + then call inflateSync() to look for a good compression block if a partial + recovery of the data is to be attempted. +*/ + + +ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any pending + output. + + inflateEnd returns Z_OK if success, or Z_STREAM_ERROR if the stream state + was inconsistent. +*/ + + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); + + This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by the + caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + For the current implementation of deflate(), a windowBits value of 8 (a + window size of 256 bytes) is not supported. As a result, a request for 8 + will result in 9 (a 512-byte window). In that case, providing 8 to + inflateInit2() will result in an error when the zlib header with 9 is + checked against the initialization of inflate(). The remedy is to not use 8 + with deflateInit2() with this initialization, or at least in that case use 9 + with inflateInit2(). + + windowBits can also be -8..-15 for raw deflate. In this case, -windowBits + determines the window size. deflate() will then generate raw deflate data + with no zlib header or trailer, and will not compute a check value. + + windowBits can also be greater than 15 for optional gzip encoding. Add + 16 to windowBits to write a simple gzip header and trailer around the + compressed data instead of a zlib wrapper. The gzip header will have no + file name, no extra data, no comment, no modification time (set to zero), no + header crc, and the operating system will be set to the appropriate value, + if the operating system was determined at compile time. If a gzip stream is + being written, strm->adler is a CRC-32 instead of an Adler-32. + + For raw deflate or gzip encoding, a request for a 256-byte window is + rejected as invalid, since only the zlib header provides a means of + transmitting the window size to the decompressor. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but is + slow and reduces compression ratio; memLevel=9 uses maximum memory for + optimal speed. The default value is 8. See zconf.h for total memory usage + as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match), or Z_RLE to limit match distances to one (run-length + encoding). Filtered data consists mostly of small values with a somewhat + random distribution. In this case, the compression algorithm is tuned to + compress them better. The effect of Z_FILTERED is to force more Huffman + coding and less string matching; it is somewhat intermediate between + Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as + fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The + strategy parameter only affects the compression ratio but not the + correctness of the compressed output even if it is not set appropriately. + Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler + decoder for special applications. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid + method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is + incompatible with the version assumed by the caller (ZLIB_VERSION). msg is + set to null if there is no error message. deflateInit2 does not perform any + compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. When using the zlib format, this + function must be called immediately after deflateInit, deflateInit2 or + deflateReset, and before any call of deflate. When doing raw deflate, this + function must be called either before any call of deflate, or immediately + after the completion of a deflate block, i.e. after all input has been + consumed and all output has been delivered when using any of the flush + options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The + compressor and decompressor must use exactly the same dictionary (see + inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size + provided in deflateInit or deflateInit2. Thus the strings most likely to be + useful should be put at the end of the dictionary, not at the front. In + addition, the current implementation of deflate will use at most the window + size minus 262 bytes of the provided dictionary. + + Upon return of this function, strm->adler is set to the Adler-32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The Adler-32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) If a raw deflate was requested, then the + Adler-32 value is not computed and strm->adler is not set. + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if not at a block boundary for raw deflate). deflateSetDictionary does + not perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateGetDictionary OF((z_streamp strm, + Bytef *dictionary, + uInt *dictLength)); +/* + Returns the sliding dictionary being maintained by deflate. dictLength is + set to the number of bytes in the dictionary, and that many bytes are copied + to dictionary. dictionary must have enough space, where 32768 bytes is + always enough. If deflateGetDictionary() is called with dictionary equal to + Z_NULL, then only the dictionary length is returned, and nothing is copied. + Similary, if dictLength is Z_NULL, then it is not set. + + deflateGetDictionary() may return a length less than the window size, even + when more than the window size in input has been provided. It may return up + to 258 bytes less in that case, due to how zlib's implementation of deflate + manages the sliding window and lookahead for matches, where matches can be + up to 258 bytes long. If the application needs the last window-size bytes of + input, then that would need to be saved by the application outside of zlib. + + deflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the + stream state is inconsistent. +*/ + +ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and can + consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being Z_NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, but + does not free and reallocate the internal compression state. The stream + will leave the compression level and any other attributes that may have been + set unchanged. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL). +*/ + +ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, + int level, + int strategy)); +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2(). This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different strategy. + If the compression approach (which is a function of the level) or the + strategy is changed, and if any input has been consumed in a previous + deflate() call, then the input available so far is compressed with the old + level and strategy using deflate(strm, Z_BLOCK). There are three approaches + for the compression levels 0, 1..3, and 4..9 respectively. The new level + and strategy will take effect at the next call of deflate(). + + If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does + not have enough output space to complete, then the parameter change will not + take effect. In this case, deflateParams() can be called again with the + same parameters and more output space to try again. + + In order to assure a change in the parameters on the first try, the + deflate stream should be flushed using deflate() with Z_BLOCK or other flush + request until strm.avail_out is not zero, before calling deflateParams(). + Then no more input data should be provided before the deflateParams() call. + If this is done, the old level and strategy will be applied to the data + compressed before deflateParams(), and the new level and strategy will be + applied to the the data compressed after deflateParams(). + + deflateParams returns Z_OK on success, Z_STREAM_ERROR if the source stream + state was inconsistent or if a parameter was invalid, or Z_BUF_ERROR if + there was not enough output space to complete the compression of the + available input data before a change in the strategy or approach. Note that + in the case of a Z_BUF_ERROR, the parameters are not changed. A return + value of Z_BUF_ERROR is not fatal, in which case deflateParams() can be + retried with more output space. +*/ + +ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, + int good_length, + int max_lazy, + int nice_length, + int max_chain)); +/* + Fine tune deflate's internal compression parameters. This should only be + used by someone who understands the algorithm used by zlib's deflate for + searching for the best matching string, and even then only by the most + fanatic optimizer trying to squeeze out the last compressed bit for their + specific input data. Read the deflate.c source code for the meaning of the + max_lazy, good_length, nice_length, and max_chain parameters. + + deflateTune() can be called after deflateInit() or deflateInit2(), and + returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. + */ + +ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, + uLong sourceLen)); +/* + deflateBound() returns an upper bound on the compressed size after + deflation of sourceLen bytes. It must be called after deflateInit() or + deflateInit2(), and after deflateSetHeader(), if used. This would be used + to allocate an output buffer for deflation in a single pass, and so would be + called before deflate(). If that first deflate() call is provided the + sourceLen input bytes, an output buffer allocated to the size returned by + deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed + to return Z_STREAM_END. Note that it is possible for the compressed size to + be larger than the value returned by deflateBound() if flush options other + than Z_FINISH or Z_NO_FLUSH are used. +*/ + +ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm, + unsigned *pending, + int *bits)); +/* + deflatePending() returns the number of bytes and bits of output that have + been generated, but not yet provided in the available output. The bytes not + provided would be due to the available output space having being consumed. + The number of bits of output not provided are between 0 and 7, where they + await more bits to join them in order to fill out a full byte. If pending + or bits are Z_NULL, then those values are not set. + + deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. + */ + +ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + deflatePrime() inserts bits in the deflate output stream. The intent + is that this function is used to start off the deflate output with the bits + leftover from a previous deflate stream when appending to it. As such, this + function can only be used for raw deflate, and must be used before the first + deflate() call after a deflateInit2() or deflateReset(). bits must be less + than or equal to 16, and that many of the least significant bits of value + will be inserted in the output. + + deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough + room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the + source stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, + gz_headerp head)); +/* + deflateSetHeader() provides gzip header information for when a gzip + stream is requested by deflateInit2(). deflateSetHeader() may be called + after deflateInit2() or deflateReset() and before the first call of + deflate(). The text, time, os, extra field, name, and comment information + in the provided gz_header structure are written to the gzip header (xflag is + ignored -- the extra flags are set according to the compression level). The + caller must assure that, if not Z_NULL, name and comment are terminated with + a zero byte, and that if extra is not Z_NULL, that extra_len bytes are + available there. If hcrc is true, a gzip header crc is included. Note that + the current versions of the command-line version of gzip (up through version + 1.3.x) do not support header crc's, and will report that it is a "multi-part + gzip file" and give up. + + If deflateSetHeader is not used, the default gzip header has text false, + the time set to zero, and os set to 255, with no extra, name, or comment + fields. The gzip header is returned to the default state by deflateReset(). + + deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, + int windowBits)); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. windowBits must be greater than or equal to the windowBits value + provided to deflateInit2() while compressing, or it must be equal to 15 if + deflateInit2() was not used. If a compressed stream with a larger window + size is given as input, inflate() will return with the error code + Z_DATA_ERROR instead of trying to allocate a larger window. + + windowBits can also be zero to request that inflate use the window size in + the zlib header of the compressed stream. + + windowBits can also be -8..-15 for raw inflate. In this case, -windowBits + determines the window size. inflate() will then process raw deflate data, + not looking for a zlib or gzip header, not generating a check value, and not + looking for any check values for comparison at the end of the stream. This + is for use with other formats that use the deflate compressed data format + such as zip. Those formats provide their own check values. If a custom + format is developed using the raw deflate format for compressed data, it is + recommended that a check value such as an Adler-32 or a CRC-32 be applied to + the uncompressed data as is done in the zlib, gzip, and zip formats. For + most applications, the zlib format should be used as is. Note that comments + above on the use in deflateInit2() applies to the magnitude of windowBits. + + windowBits can also be greater than 15 for optional gzip decoding. Add + 32 to windowBits to enable zlib and gzip decoding with automatic header + detection, or add 16 to decode only the gzip format (the zlib format will + return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a + CRC-32 instead of an Adler-32. Unlike the gunzip utility and gzread() (see + below), inflate() will not automatically decode concatenated gzip streams. + inflate() will return Z_STREAM_END at the end of the gzip stream. The state + would need to be reset to continue decoding a subsequent gzip stream. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller, or Z_STREAM_ERROR if the parameters are + invalid, such as a null pointer to the structure. msg is set to null if + there is no error message. inflateInit2 does not perform any decompression + apart from possibly reading the zlib header if present: actual decompression + will be done by inflate(). (So next_in and avail_in may be modified, but + next_out and avail_out are unused and unchanged.) The current implementation + of inflateInit2() does not process any header information -- that is + deferred until inflate() is called. +*/ + +ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate, + if that call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the Adler-32 value returned by that call of inflate. + The compressor and decompressor must use exactly the same dictionary (see + deflateSetDictionary). For raw inflate, this function can be called at any + time to set the dictionary. If the provided dictionary is smaller than the + window and there is already data in the window, then the provided dictionary + will amend what's there. The application must insure that the dictionary + that was used for compression is provided. + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect Adler-32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm, + Bytef *dictionary, + uInt *dictLength)); +/* + Returns the sliding dictionary being maintained by inflate. dictLength is + set to the number of bytes in the dictionary, and that many bytes are copied + to dictionary. dictionary must have enough space, where 32768 bytes is + always enough. If inflateGetDictionary() is called with dictionary equal to + Z_NULL, then only the dictionary length is returned, and nothing is copied. + Similary, if dictLength is Z_NULL, then it is not set. + + inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the + stream state is inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); +/* + Skips invalid compressed data until a possible full flush point (see above + for the description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync searches for a 00 00 FF FF pattern in the compressed data. + All full flush points have this pattern, but not all occurrences of this + pattern are full flush points. + + inflateSync returns Z_OK if a possible full flush point has been found, + Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point + has been found, or Z_STREAM_ERROR if the stream structure was inconsistent. + In the success case, the application may save the current current value of + total_in which indicates where valid compressed data was found. In the + error case, the application may repeatedly call inflateSync, providing more + input each time, until success or end of the input data. +*/ + +ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when randomly accessing a large stream. The + first pass through the stream can periodically record the inflate state, + allowing restarting inflate at those points when randomly accessing the + stream. + + inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being Z_NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate the internal decompression state. The + stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL). +*/ + +ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm, + int windowBits)); +/* + This function is the same as inflateReset, but it also permits changing + the wrap and window size requests. The windowBits parameter is interpreted + the same as it is for inflateInit2. If the window size is changed, then the + memory allocated for the window is freed, and the window will be reallocated + by inflate() if needed. + + inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL), or if + the windowBits parameter is invalid. +*/ + +ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + This function inserts bits in the inflate input stream. The intent is + that this function is used to start inflating at a bit position in the + middle of a byte. The provided bits will be used before any bytes are used + from next_in. This function should only be used with raw inflate, and + should be used before the first inflate() call after inflateInit2() or + inflateReset(). bits must be less than or equal to 16, and that many of the + least significant bits of value will be inserted in the input. + + If bits is negative, then the input stream bit buffer is emptied. Then + inflatePrime() can be called again to put bits in the buffer. This is used + to clear out bits leftover after feeding inflate a block description prior + to feeding inflate codes. + + inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm)); +/* + This function returns two values, one in the lower 16 bits of the return + value, and the other in the remaining upper bits, obtained by shifting the + return value down 16 bits. If the upper value is -1 and the lower value is + zero, then inflate() is currently decoding information outside of a block. + If the upper value is -1 and the lower value is non-zero, then inflate is in + the middle of a stored block, with the lower value equaling the number of + bytes from the input remaining to copy. If the upper value is not -1, then + it is the number of bits back from the current bit position in the input of + the code (literal or length/distance pair) currently being processed. In + that case the lower value is the number of bytes already emitted for that + code. + + A code is being processed if inflate is waiting for more input to complete + decoding of the code, or if it has completed decoding but is waiting for + more output space to write the literal or match data. + + inflateMark() is used to mark locations in the input data for random + access, which may be at bit positions, and to note those cases where the + output of a code may span boundaries of random access blocks. The current + location in the input stream can be determined from avail_in and data_type + as noted in the description for the Z_BLOCK flush parameter for inflate. + + inflateMark returns the value noted above, or -65536 if the provided + source stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, + gz_headerp head)); +/* + inflateGetHeader() requests that gzip header information be stored in the + provided gz_header structure. inflateGetHeader() may be called after + inflateInit2() or inflateReset(), and before the first call of inflate(). + As inflate() processes the gzip stream, head->done is zero until the header + is completed, at which time head->done is set to one. If a zlib stream is + being decoded, then head->done is set to -1 to indicate that there will be + no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be + used to force inflate() to return immediately after header processing is + complete and before any actual data is decompressed. + + The text, time, xflags, and os fields are filled in with the gzip header + contents. hcrc is set to true if there is a header CRC. (The header CRC + was valid if done is set to one.) If extra is not Z_NULL, then extra_max + contains the maximum number of bytes to write to extra. Once done is true, + extra_len contains the actual extra field length, and extra contains the + extra field, or that field truncated if extra_max is less than extra_len. + If name is not Z_NULL, then up to name_max characters are written there, + terminated with a zero unless the length is greater than name_max. If + comment is not Z_NULL, then up to comm_max characters are written there, + terminated with a zero unless the length is greater than comm_max. When any + of extra, name, or comment are not Z_NULL and the respective field is not + present in the header, then that field is set to Z_NULL to signal its + absence. This allows the use of deflateSetHeader() with the returned + structure to duplicate the header. However if those fields are set to + allocated memory, then the application will need to save those pointers + elsewhere so that they can be eventually freed. + + If inflateGetHeader is not used, then the header information is simply + discarded. The header is always checked for validity, including the header + CRC if present. inflateReset() will reset the process to discard the header + information. The application would need to call inflateGetHeader() again to + retrieve the header from the next gzip stream. + + inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, + unsigned char FAR *window)); + + Initialize the internal stream state for decompression using inflateBack() + calls. The fields zalloc, zfree and opaque in strm must be initialized + before the call. If zalloc and zfree are Z_NULL, then the default library- + derived memory allocation routines are used. windowBits is the base two + logarithm of the window size, in the range 8..15. window is a caller + supplied buffer of that size. Except for special applications where it is + assured that deflate was used with small window sizes, windowBits must be 15 + and a 32K byte window must be supplied to be able to decompress general + deflate streams. + + See inflateBack() for the usage of these routines. + + inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of + the parameters are invalid, Z_MEM_ERROR if the internal state could not be + allocated, or Z_VERSION_ERROR if the version of the library does not match + the version of the header file. +*/ + +typedef unsigned (*in_func) OF((void FAR *, + z_const unsigned char FAR * FAR *)); +typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); + +ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, + in_func in, void FAR *in_desc, + out_func out, void FAR *out_desc)); +/* + inflateBack() does a raw inflate with a single call using a call-back + interface for input and output. This is potentially more efficient than + inflate() for file i/o applications, in that it avoids copying between the + output and the sliding window by simply making the window itself the output + buffer. inflate() can be faster on modern CPUs when used with large + buffers. inflateBack() trusts the application to not change the output + buffer passed by the output function, at least until inflateBack() returns. + + inflateBackInit() must be called first to allocate the internal state + and to initialize the state with the user-provided window buffer. + inflateBack() may then be used multiple times to inflate a complete, raw + deflate stream with each call. inflateBackEnd() is then called to free the + allocated state. + + A raw deflate stream is one with no zlib or gzip header or trailer. + This routine would normally be used in a utility that reads zip or gzip + files and writes out uncompressed files. The utility would decode the + header and process the trailer on its own, hence this routine expects only + the raw deflate stream to decompress. This is different from the default + behavior of inflate(), which expects a zlib header and trailer around the + deflate stream. + + inflateBack() uses two subroutines supplied by the caller that are then + called by inflateBack() for input and output. inflateBack() calls those + routines until it reads a complete deflate stream and writes out all of the + uncompressed data, or until it encounters an error. The function's + parameters and return types are defined above in the in_func and out_func + typedefs. inflateBack() will call in(in_desc, &buf) which should return the + number of bytes of provided input, and a pointer to that input in buf. If + there is no input available, in() must return zero -- buf is ignored in that + case -- and inflateBack() will return a buffer error. inflateBack() will + call out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. + out() should return zero on success, or non-zero on failure. If out() + returns non-zero, inflateBack() will return with an error. Neither in() nor + out() are permitted to change the contents of the window provided to + inflateBackInit(), which is also the buffer that out() uses to write from. + The length written by out() will be at most the window size. Any non-zero + amount of input may be provided by in(). + + For convenience, inflateBack() can be provided input on the first call by + setting strm->next_in and strm->avail_in. If that input is exhausted, then + in() will be called. Therefore strm->next_in must be initialized before + calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called + immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in + must also be initialized, and then if strm->avail_in is not zero, input will + initially be taken from strm->next_in[0 .. strm->avail_in - 1]. + + The in_desc and out_desc parameters of inflateBack() is passed as the + first parameter of in() and out() respectively when they are called. These + descriptors can be optionally used to pass any information that the caller- + supplied in() and out() functions need to do their job. + + On return, inflateBack() will set strm->next_in and strm->avail_in to + pass back any unused input that was provided by the last in() call. The + return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR + if in() or out() returned an error, Z_DATA_ERROR if there was a format error + in the deflate stream (in which case strm->msg is set to indicate the nature + of the error), or Z_STREAM_ERROR if the stream was not properly initialized. + In the case of Z_BUF_ERROR, an input or output error can be distinguished + using strm->next_in which will be Z_NULL only if in() returned an error. If + strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning + non-zero. (in() will always be called before out(), so strm->next_in is + assured to be defined if out() returns non-zero.) Note that inflateBack() + cannot return Z_OK. +*/ + +ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); +/* + All memory allocated by inflateBackInit() is freed. + + inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream + state was inconsistent. +*/ + +ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); +/* Return flags indicating compile-time options. + + Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: + 1.0: size of uInt + 3.2: size of uLong + 5.4: size of voidpf (pointer) + 7.6: size of z_off_t + + Compiler, assembler, and debug options: + 8: ZLIB_DEBUG + 9: ASMV or ASMINF -- use ASM code + 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention + 11: 0 (reserved) + + One-time table building (smaller code, but not thread-safe if true): + 12: BUILDFIXED -- build static block decoding tables when needed + 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed + 14,15: 0 (reserved) + + Library content (indicates missing functionality): + 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking + deflate code when not needed) + 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect + and decode gzip streams (to avoid linking crc code) + 18-19: 0 (reserved) + + Operation variations (changes in library functionality): + 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate + 21: FASTEST -- deflate algorithm with only one, lowest compression level + 22,23: 0 (reserved) + + The sprintf variant used by gzprintf (zero is best): + 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format + 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! + 26: 0 = returns value, 1 = void -- 1 means inferred string length returned + + Remainder: + 27-31: 0 (reserved) + */ + +#ifndef Z_SOLO + + /* utility functions */ + +/* + The following utility functions are implemented on top of the basic + stream-oriented functions. To simplify the interface, some default options + are assumed (compression level and memory usage, standard memory allocation + functions). The source code of these utility functions can be modified if + you need special options. +*/ + +ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed data. compress() is equivalent to compress2() with a level + parameter of Z_DEFAULT_COMPRESSION. + + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int level)); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed data. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); +/* + compressBound() returns an upper bound on the compressed size after + compress() or compress2() on sourceLen bytes. It would be used before a + compress() or compress2() call to allocate the destination buffer. +*/ + +ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be large enough to hold the entire + uncompressed data. (The size of the uncompressed data must have been saved + previously by the compressor and transmitted to the decompressor by some + mechanism outside the scope of this compression library.) Upon exit, destLen + is the actual size of the uncompressed data. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In + the case where there is not enough room, uncompress() will fill the output + buffer with the uncompressed data up to that point. +*/ + +ZEXTERN int ZEXPORT uncompress2 OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong *sourceLen)); +/* + Same as uncompress, except that sourceLen is a pointer, where the + length of the source is *sourceLen. On return, *sourceLen is the number of + source bytes consumed. +*/ + + /* gzip file access functions */ + +/* + This library supports reading and writing files in gzip (.gz) format with + an interface similar to that of stdio, using the functions that start with + "gz". The gzip format is different from the zlib format. gzip is a gzip + wrapper, documented in RFC 1952, wrapped around a deflate stream. +*/ + +typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ + +/* +ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); + + Opens a gzip (.gz) file for reading or writing. The mode parameter is as + in fopen ("rb" or "wb") but can also include a compression level ("wb9") or + a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only + compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F' + for fixed code compression as in "wb9F". (See the description of + deflateInit2 for more information about the strategy parameter.) 'T' will + request transparent writing or appending with no compression and not using + the gzip format. + + "a" can be used instead of "w" to request that the gzip stream that will + be written be appended to the file. "+" will result in an error, since + reading and writing to the same gzip file is not supported. The addition of + "x" when writing will create the file exclusively, which fails if the file + already exists. On systems that support it, the addition of "e" when + reading or writing will set the flag to close the file on an execve() call. + + These functions, as well as gzip, will read and decode a sequence of gzip + streams in a file. The append function of gzopen() can be used to create + such a file. (Also see gzflush() for another way to do this.) When + appending, gzopen does not test whether the file begins with a gzip stream, + nor does it look for the end of the gzip streams to begin appending. gzopen + will simply append a gzip stream to the existing file. + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. When + reading, this will be detected automatically by looking for the magic two- + byte gzip header. + + gzopen returns NULL if the file could not be opened, if there was + insufficient memory to allocate the gzFile state, or if an invalid mode was + specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). + errno can be checked to determine if the reason gzopen failed was that the + file could not be opened. +*/ + +ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); +/* + gzdopen associates a gzFile with the file descriptor fd. File descriptors + are obtained from calls like open, dup, creat, pipe or fileno (if the file + has been previously opened with fopen). The mode parameter is as in gzopen. + + The next call of gzclose on the returned gzFile will also close the file + descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor + fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, + mode);. The duplicated descriptor should be saved to avoid a leak, since + gzdopen does not close fd if it fails. If you are using fileno() to get the + file descriptor from a FILE *, then you will have to use dup() to avoid + double-close()ing the file descriptor. Both gzclose() and fclose() will + close the associated file descriptor, so they need to have different file + descriptors. + + gzdopen returns NULL if there was insufficient memory to allocate the + gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not + provided, or '+' was provided), or if fd is -1. The file descriptor is not + used until the next gz* read, write, seek, or close operation, so gzdopen + will not detect if fd is invalid (unless fd is -1). +*/ + +ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size)); +/* + Set the internal buffer size used by this library's functions. The + default buffer size is 8192 bytes. This function must be called after + gzopen() or gzdopen(), and before any other calls that read or write the + file. The buffer memory allocation is always deferred to the first read or + write. Three times that size in buffer space is allocated. A larger buffer + size of, for example, 64K or 128K bytes will noticeably increase the speed + of decompression (reading). + + The new buffer size also affects the maximum length for gzprintf(). + + gzbuffer() returns 0 on success, or -1 on failure, such as being called + too late. +*/ + +ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); +/* + Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. Previously provided + data is flushed before the parameter change. + + gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not + opened for writing, Z_ERRNO if there is an error writing the flushed data, + or Z_MEM_ERROR if there is a memory allocation error. +*/ + +ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. If + the input file is not in gzip format, gzread copies the given number of + bytes into the buffer directly from the file. + + After reaching the end of a gzip stream in the input, gzread will continue + to read, looking for another gzip stream. Any number of gzip streams may be + concatenated in the input file, and will all be decompressed by gzread(). + If something other than a gzip stream is encountered after a gzip stream, + that remaining trailing garbage is ignored (and no error is returned). + + gzread can be used to read a gzip file that is being concurrently written. + Upon reaching the end of the input, gzread will return with the available + data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then + gzclearerr can be used to clear the end of file indicator in order to permit + gzread to be tried again. Z_OK indicates that a gzip stream was completed + on the last gzread. Z_BUF_ERROR indicates that the input file ended in the + middle of a gzip stream. Note that gzread does not return -1 in the event + of an incomplete gzip stream. This error is deferred until gzclose(), which + will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip + stream. Alternatively, gzerror can be used before gzclose to detect this + case. + + gzread returns the number of uncompressed bytes actually read, less than + len for end of file, or -1 for error. If len is too large to fit in an int, + then nothing is read, -1 is returned, and the error state is set to + Z_STREAM_ERROR. +*/ + +ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems, + gzFile file)); +/* + Read up to nitems items of size size from file to buf, otherwise operating + as gzread() does. This duplicates the interface of stdio's fread(), with + size_t request and return types. If the library defines size_t, then + z_size_t is identical to size_t. If not, then z_size_t is an unsigned + integer type that can contain a pointer. + + gzfread() returns the number of full items read of size size, or zero if + the end of the file was reached and a full item could not be read, or if + there was an error. gzerror() must be consulted if zero is returned in + order to determine if there was an error. If the multiplication of size and + nitems overflows, i.e. the product does not fit in a z_size_t, then nothing + is read, zero is returned, and the error state is set to Z_STREAM_ERROR. + + In the event that the end of file is reached and only a partial item is + available at the end, i.e. the remaining uncompressed data length is not a + multiple of size, then the final partial item is nevetheless read into buf + and the end-of-file flag is set. The length of the partial item read is not + provided, but could be inferred from the result of gztell(). This behavior + is the same as the behavior of fread() implementations in common libraries, + but it prevents the direct use of gzfread() to read a concurrently written + file, reseting and retrying on end-of-file, when size is not 1. +*/ + +ZEXTERN int ZEXPORT gzwrite OF((gzFile file, + voidpc buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes written or 0 in case of + error. +*/ + +ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size, + z_size_t nitems, gzFile file)); +/* + gzfwrite() writes nitems items of size size from buf to file, duplicating + the interface of stdio's fwrite(), with size_t request and return types. If + the library defines size_t, then z_size_t is identical to size_t. If not, + then z_size_t is an unsigned integer type that can contain a pointer. + + gzfwrite() returns the number of full items written of size size, or zero + if there was an error. If the multiplication of size and nitems overflows, + i.e. the product does not fit in a z_size_t, then nothing is written, zero + is returned, and the error state is set to Z_STREAM_ERROR. +*/ + +ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...)); +/* + Converts, formats, and writes the arguments to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written, or a negative zlib error code in case + of error. The number of uncompressed bytes written is limited to 8191, or + one less than the buffer size given to gzbuffer(). The caller should assure + that this limit is not exceeded. If it is exceeded, then gzprintf() will + return an error (0) with nothing written. In this case, there may also be a + buffer overflow with unpredictable consequences, which is possible only if + zlib was compiled with the insecure functions sprintf() or vsprintf() + because the secure snprintf() or vsnprintf() functions were not available. + This can be determined using zlibCompileFlags(). +*/ + +ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); +/* + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + + gzputs returns the number of characters written, or -1 in case of error. +*/ + +ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); +/* + Reads bytes from the compressed file until len-1 characters are read, or a + newline character is read and transferred to buf, or an end-of-file + condition is encountered. If any characters are read or if len == 1, the + string is terminated with a null character. If no characters are read due + to an end-of-file or len < 1, then the buffer is left untouched. + + gzgets returns buf which is a null-terminated string, or it returns NULL + for end-of-file or in case of error. If there was an error, the contents at + buf are indeterminate. +*/ + +ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); +/* + Writes c, converted to an unsigned char, into the compressed file. gzputc + returns the value that was written, or -1 in case of error. +*/ + +ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); +/* + Reads one byte from the compressed file. gzgetc returns this byte or -1 + in case of end of file or error. This is implemented as a macro for speed. + As such, it does not do all of the checking the other functions do. I.e. + it does not check to see if file is NULL, nor whether the structure file + points to has been clobbered or not. +*/ + +ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); +/* + Push one character back onto the stream to be read as the first character + on the next read. At least one character of push-back is allowed. + gzungetc() returns the character pushed, or -1 on failure. gzungetc() will + fail if c is -1, and may fail if a character has been pushed but not read + yet. If gzungetc is used immediately after gzopen or gzdopen, at least the + output buffer size of pushed characters is allowed. (See gzbuffer above.) + The pushed character will be discarded if the stream is repositioned with + gzseek() or gzrewind(). +*/ + +ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter flush + is as in the deflate() function. The return value is the zlib error number + (see function gzerror below). gzflush is only permitted when writing. + + If the flush parameter is Z_FINISH, the remaining data is written and the + gzip stream is completed in the output. If gzwrite() is called again, a new + gzip stream will be started in the output. gzread() is able to read such + concatenated gzip streams. + + gzflush should be called only when strictly necessary because it will + degrade compression if called too often. +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, + z_off_t offset, int whence)); + + Sets the starting position for the next gzread or gzwrite on the given + compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); +/* + Rewinds the given file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +*/ + +/* +ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); + + Returns the starting position for the next gzread or gzwrite on the given + compressed file. This position represents a number of bytes in the + uncompressed data stream, and is zero when starting, even if appending or + reading a gzip stream from the middle of a file using gzdopen(). + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file)); + + Returns the current offset in the file being read or written. This offset + includes the count of bytes that precede the gzip stream, for example when + appending or when using gzdopen() for reading. When reading, the offset + does not include as yet unused buffered input. This information can be used + for a progress indicator. On error, gzoffset() returns -1. +*/ + +ZEXTERN int ZEXPORT gzeof OF((gzFile file)); +/* + Returns true (1) if the end-of-file indicator has been set while reading, + false (0) otherwise. Note that the end-of-file indicator is set only if the + read tried to go past the end of the input, but came up short. Therefore, + just like feof(), gzeof() may return false even if there is no more data to + read, in the event that the last read request was for the exact number of + bytes remaining in the input file. This will happen if the input file size + is an exact multiple of the buffer size. + + If gzeof() returns true, then the read functions will return no more data, + unless the end-of-file indicator is reset by gzclearerr() and the input file + has grown since the previous end of file was detected. +*/ + +ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); +/* + Returns true (1) if file is being copied directly while reading, or false + (0) if file is a gzip stream being decompressed. + + If the input file is empty, gzdirect() will return true, since the input + does not contain a gzip stream. + + If gzdirect() is used immediately after gzopen() or gzdopen() it will + cause buffers to be allocated to allow reading the file to determine if it + is a gzip file. Therefore if gzbuffer() is used, it should be called before + gzdirect(). + + When writing, gzdirect() returns true (1) if transparent writing was + requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: + gzdirect() is not needed when writing. Transparent writing must be + explicitly requested, so the application already knows the answer. When + linking statically, using gzdirect() will include all of the zlib code for + gzip file reading and decompression, which may not be desired.) +*/ + +ZEXTERN int ZEXPORT gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file and + deallocates the (de)compression state. Note that once file is closed, you + cannot call gzerror with file, since its structures have been deallocated. + gzclose must not be called more than once on the same file, just as free + must not be called more than once on the same allocation. + + gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a + file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the + last read ended in the middle of a gzip stream, or Z_OK on success. +*/ + +ZEXTERN int ZEXPORT gzclose_r OF((gzFile file)); +ZEXTERN int ZEXPORT gzclose_w OF((gzFile file)); +/* + Same as gzclose(), but gzclose_r() is only for use when reading, and + gzclose_w() is only for use when writing or appending. The advantage to + using these instead of gzclose() is that they avoid linking in zlib + compression or decompression code that is not used when only reading or only + writing respectively. If gzclose() is used, then both compression and + decompression code will be included the application when linking to a static + zlib library. +*/ + +ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the given + compressed file. errnum is set to zlib error number. If an error occurred + in the file system and not in the compression library, errnum is set to + Z_ERRNO and the application may consult errno to get the exact error code. + + The application must not modify the returned string. Future calls to + this function may invalidate the previously returned string. If file is + closed, then the string previously returned by gzerror will no longer be + available. + + gzerror() should be used to distinguish errors from end-of-file for those + functions above that do not distinguish those cases in their return values. +*/ + +ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); +/* + Clears the error and end-of-file flags for file. This is analogous to the + clearerr() function in stdio. This is useful for continuing to read a gzip + file that is being written concurrently. +*/ + +#endif /* !Z_SOLO */ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the compression + library. +*/ + +ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is Z_NULL, this function returns the + required initial value for the checksum. + + An Adler-32 checksum is almost as reliable as a CRC-32 but can be computed + much faster. + + Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +ZEXTERN uLong ZEXPORT adler32_z OF((uLong adler, const Bytef *buf, + z_size_t len)); +/* + Same as adler32(), but with a size_t length. +*/ + +/* +ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, + z_off_t len2)); + + Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 + and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for + each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note + that the z_off_t type (like off_t) is a signed integer. If len2 is + negative, the result has no meaning or utility. +*/ + +ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); +/* + Update a running CRC-32 with the bytes buf[0..len-1] and return the + updated CRC-32. If buf is Z_NULL, this function returns the required + initial value for the crc. Pre- and post-conditioning (one's complement) is + performed within this function so it shouldn't be done by the application. + + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + +ZEXTERN uLong ZEXPORT crc32_z OF((uLong adler, const Bytef *buf, + z_size_t len)); +/* + Same as crc32(), but with a size_t length. +*/ + +/* +ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); + + Combine two CRC-32 check values into one. For two sequences of bytes, + seq1 and seq2 with lengths len1 and len2, CRC-32 check values were + calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 + check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and + len2. +*/ + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size)); +ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, + unsigned char FAR *window, + const char *version, + int stream_size)); +#ifdef Z_PREFIX_SET +# define z_deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) +# define z_inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) +# define z_deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) +# define z_inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ + (int)sizeof(z_stream)) +# define z_inflateBackInit(strm, windowBits, window) \ + inflateBackInit_((strm), (windowBits), (window), \ + ZLIB_VERSION, (int)sizeof(z_stream)) +#else +# define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) +# define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) +# define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) +# define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ + (int)sizeof(z_stream)) +# define inflateBackInit(strm, windowBits, window) \ + inflateBackInit_((strm), (windowBits), (window), \ + ZLIB_VERSION, (int)sizeof(z_stream)) +#endif + +#ifndef Z_SOLO + +/* gzgetc() macro and its supporting function and exposed data structure. Note + * that the real internal state is much larger than the exposed structure. + * This abbreviated structure exposes just enough for the gzgetc() macro. The + * user should not mess with these exposed elements, since their names or + * behavior could change in the future, perhaps even capriciously. They can + * only be used by the gzgetc() macro. You have been warned. + */ +struct gzFile_s { + unsigned have; + unsigned char *next; + z_off64_t pos; +}; +ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */ +#ifdef Z_PREFIX_SET +# undef z_gzgetc +# define z_gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g)) +#else +# define gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g)) +#endif + +/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or + * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if + * both are true, the application gets the *64 functions, and the regular + * functions are changed to 64 bits) -- in case these are set on systems + * without large file support, _LFS64_LARGEFILE must also be true + */ +#ifdef Z_LARGE64 + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int)); + ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t)); +#endif + +#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) +# ifdef Z_PREFIX_SET +# define z_gzopen z_gzopen64 +# define z_gzseek z_gzseek64 +# define z_gztell z_gztell64 +# define z_gzoffset z_gzoffset64 +# define z_adler32_combine z_adler32_combine64 +# define z_crc32_combine z_crc32_combine64 +# else +# define gzopen gzopen64 +# define gzseek gzseek64 +# define gztell gztell64 +# define gzoffset gzoffset64 +# define adler32_combine adler32_combine64 +# define crc32_combine crc32_combine64 +# endif +# ifndef Z_LARGE64 + ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *)); + ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int)); + ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile)); + ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t)); +# endif +#else + ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *)); + ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int)); + ZEXTERN z_off_t ZEXPORT gztell OF((gzFile)); + ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile)); + ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); +#endif + +#else /* Z_SOLO */ + + ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t)); + ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t)); + +#endif /* !Z_SOLO */ + +/* undocumented functions */ +ZEXTERN const char * ZEXPORT zError OF((int)); +ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp)); +ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void)); +ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int)); +ZEXTERN int ZEXPORT inflateValidate OF((z_streamp, int)); +ZEXTERN unsigned long ZEXPORT inflateCodesUsed OF ((z_streamp)); +ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp)); +ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp)); +#if (defined(_WIN32) || defined(__CYGWIN__)) && !defined(Z_SOLO) +ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path, + const char *mode)); +#endif +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file, + const char *format, + va_list va)); +# endif +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* ZLIB_H */ diff --git a/zlib/share/pkgconfig/zlib.pc b/zlib/share/pkgconfig/zlib.pc new file mode 100644 index 0000000..b9866be --- /dev/null +++ b/zlib/share/pkgconfig/zlib.pc @@ -0,0 +1,13 @@ +prefix=C:/Program Files (x86)/zlib +exec_prefix=C:/Program Files (x86)/zlib +libdir=C:/Program Files (x86)/zlib/lib +sharedlibdir=C:/Program Files (x86)/zlib/lib +includedir=C:/Program Files (x86)/zlib/include + +Name: zlib +Description: zlib compression library +Version: 1.2.11 + +Requires: +Libs: -L${libdir} -L${sharedlibdir} -lz +Cflags: -I${includedir}