-
FT2 and FT4 are having the wrong time cycles. Both are transmitting 2 cycles in direct order, then listening 2 cycles on IC705
-
calling CQ -> "more" has no back-button
-
function of "radio linked" button is not really clear.
- clicking it will disconnect, clicking again doesn't do anything
- sometimes after disconnecting and clicking the button it shows a yellow light, fading and reappiering, but nothing happens
- sometimes radio links doesn't show green light, but waterfall continues showing audio of the rig and decodes callsings
- active TRXing doesn't stop when losing connection
-
tapping waterfall moves blue line, but red lines doesn't take place on either side of the blue line, sometimes the blue line is not in the middle of the red ones.
-
TRXing on the designated audio frequency shows a difference to the really used audio frequency. The trx-ed audio is okay with the left bar, but exceeds the right bar by some bars.
-
if you're gonna activate TRXing, the waterfall is not visible any more, but waterfall bars are. Instead "waiting for messages" appears. It's a giant waste of limited space using the whole width of the screen for some neat little conversation, which FTx is supposed to be.
I'm going to add a new proposal (picture) to what i think the screen should look like. Gimme an hour to draw. (There's lots of space wasted for big Call CQ button, for seldom used Hunt-button, lower button bar could be more compressed (Decode, Map and so on). Listening, Radio linked-button, Band&mode and shown band/mode/frequency could use same line. Waterfall bars should less high, ideally the layout should be adjustable between waterfall bars and resulting waterfall)
I'm supposed to be a normal user and i would prefer to see waterfall
-
Decode simple list button / extended list button doesn't show same behavor. Depending on how it's adjusted before connection, the function is either in accordance to simple listing (button shows 3 narrow lines) or it's vice versa, button shows bigger distance between the lines, but listing is in "simple mode"
-
Connection FT8AF with WfView on ICOM 7300 doesn't go on trx in a reliable way. If Call CQ is activated, it does nothing for 5 or 6 cycles (depending on what tx period is chosen), then it transmits suddenly and keeps going until watchdog switches off or it's deactivated by user.
That's the first result of testing the dev.1137...
73s Cornel
FT2 and FT4 are having the wrong time cycles. Both are transmitting 2 cycles in direct order, then listening 2 cycles on IC705
calling CQ -> "more" has no back-button
function of "radio linked" button is not really clear.
tapping waterfall moves blue line, but red lines doesn't take place on either side of the blue line, sometimes the blue line is not in the middle of the red ones.
TRXing on the designated audio frequency shows a difference to the really used audio frequency. The trx-ed audio is okay with the left bar, but exceeds the right bar by some bars.
if you're gonna activate TRXing, the waterfall is not visible any more, but waterfall bars are. Instead "waiting for messages" appears. It's a giant waste of limited space using the whole width of the screen for some neat little conversation, which FTx is supposed to be.
I'm going to add a new proposal (picture) to what i think the screen should look like. Gimme an hour to draw. (There's lots of space wasted for big Call CQ button, for seldom used Hunt-button, lower button bar could be more compressed (Decode, Map and so on). Listening, Radio linked-button, Band&mode and shown band/mode/frequency could use same line. Waterfall bars should less high, ideally the layout should be adjustable between waterfall bars and resulting waterfall)
I'm supposed to be a normal user and i would prefer to see waterfall
Decode simple list button / extended list button doesn't show same behavor. Depending on how it's adjusted before connection, the function is either in accordance to simple listing (button shows 3 narrow lines) or it's vice versa, button shows bigger distance between the lines, but listing is in "simple mode"
Connection FT8AF with WfView on ICOM 7300 doesn't go on trx in a reliable way. If Call CQ is activated, it does nothing for 5 or 6 cycles (depending on what tx period is chosen), then it transmits suddenly and keeps going until watchdog switches off or it's deactivated by user.
That's the first result of testing the dev.1137...
73s Cornel