Skip to content

Latest commit

 

History

History
39 lines (26 loc) · 1.3 KB

README.md

File metadata and controls

39 lines (26 loc) · 1.3 KB

Reflow Oven Controller - Soldering

Software to build a reflow solder oven using a cheap pizza oven.

Build using the xpcc microcontroller framework.

Hardware

  • Cheap pizza oven (or similar)
  • Solid State Relais (e.g. Fotek SSR-25 DA)
  • SSD1306 OLED Display (128x64 px, 1")
  • Pt100 temperature sensor (and LTC2984 measurement IC)
  • High temperature wire (e.g.)
  • 5V Power supply

Ui

The oven has two buttons

Start / Temperature button

This button starts the reflow process or increases the temperature by 5°C if the reflow process is already running.

Stop / Mode button

To stop a running reflow process press this button. If no reflow process is running the button is used to switch between the reflow modes (displayes in the upper right corner of the display):

  • NoPb
  • Pb
  • Constant Temperature (e.g. T85 = 85°C)

Get the code

git clone --recursive https://github.com/rleh/reflow-oven-xpcc.git

The repository contains the lastest release of the xpcc framework as a git submodule, a SConstruct file for the xpcc build system and the source code.