target-device.def

#######################################
## PART A
##-------------------------------------
## 芯片描述信息
#######################################


#=====================================
##  1 ##
######## 芯片描述信息 ########

## ASIC type: gallite/8808/8809/8810
CT_ASIC         ?= 8810

## Chip package for different sram size:
## CT1128: 0Mbit sram
## CT1129/CT8852D/CT8853D/CT8852M/CT8853M/CT8852A/CT8853A: 16Mbit sram
## CT1130/CT8852B/CT8853B/RDA8810: 32Mbit sram
## CT1131/CT8852C/CT8853C/CT8851C: 64Mbit sram
CT_CHIP_PKG 	?= RDA8810

## Chip die type:
## 8805/8806 (if CT_ASIC is gallite)
## or set to null (otherwise)
CT_CHIP_DIE 	?= 

CHARGERCURRENT_ADJUST_DYNAMIC ?= 1

#######################################
## PART B
##-------------------------------------
## 驱动描述信息
#######################################


## 注意1：除非特别说明，module的名字必须和edrv目录下面的目录名保持一致，
## 否则编译的时候找不到对应的目标。如果edrv下面没有相关的目录，
## 说明暂时没有这个设备的驱动，需要驱动工程师自己去开发一个新的驱动，
## 驱动程序可以根据设备的SPEC参考已有的驱动进行修改。


#=====================================
##  2 ##
######## 触屏驱动 ########

## 芯片集成，需要则设置为rda1203_gallite，否则设置为空
TSD_MODEL       ?=


#=====================================
##  3 ##
######## FM驱动 ########

## rda5802e_gallite (如果使用8805/8806芯片集成的FM模块)
## rda5888e
## (如果使用rda5888s，也需要配成rda5888e)
## rda5888h
## rda5876
## rda5802na
FM_MODEL        ?= 

## 如果使用I2S，则设置为1；
## 如果使用LINE-IN，则设置为0
FM_USING_I2S    ?= 0

## FM使用的32K时钟管脚: 1/0
## 1: 32K_CLK pin
## 0: CLK_OUT pin
FM_USE_32K_CLK_PIN ?= 0

## FM使用外置拉杆天线（不需要插入耳机收听）
#MMI_EXPORT_FLAG += FM_RADIO_WITH_EXTERNAL_ANT


#=====================================
##  4 ##
######## FLASH驱动 ########

## ADMUX MCP
##
## Normal MCP
##
## SPI Flash (RAM is packaged inside baseband chip)
##1 <General> flsh_spi32m     32
##  <General> flsh_spi32x2m   64
##  <General> flsh_spi64m     64
##  <General> flsh_spi64x2m   128
##  <General> flsh_spi128m    128
##
## Modem RAM
##1 <General> modem_ram
FLSH_MODEL      ?= modem_ram

## Flash model interface: parallel/spi
FLSH_IF         ?= 

## EBC CLK cfg:__52MHz__/__78MHz__/__104MHz__/__156MHz__
SYS_MEMD_EBC_CLK ?= __104MHz__

## SPI Flash SPI CLK cfg:__52MHz__/__78MHz__/__104MHz__/__156MHz__
ifeq "$(strip ${FLSH_IF})" "spi"
SYS_MEMD_FLSH_SPI_CLK ?= __78MHz__
endif # (${FLSH_IF},)

## Ram is ADMUX or not
ifeq "$(strip ${CT_ASIC_CFG})" "chip"
TARGET_EXPORT_FLAG    += MEMD_RAM_IS_ADMUX
## Flash is ADMUX or not 
#TARGET_EXPORT_FLAG    += MEMD_FLASH_IS_ADMUX
## Ram support burst mode or not
TARGET_EXPORT_FLAG    += MEMD_RAM_IS_BURST
## Flash support burst mode or not
#TARGET_EXPORT_FLAG    += MEMD_FLASH_IS_BURST
else
#TARGET_EXPORT_FLAG    += MEMD_RAM_PAGE_MODE
TARGET_EXPORT_FLAG    += FPGA_PSRAM_MICRON
endif

#=====================================
##  5 ##
######## LCD驱动 ########

##	1 QVGA	240*320
##	hx8347 lgdp4532 st7781 ssd1297 spfd5408b
##	hx8367 s6d1121 st7787 ili9320
##	otm3225 ili9325 ili9328 ili9340
##	s6d04h0a01(无id寄存器)
##	2 QCIF	176*220
##	hx8340b kc20 r61503v otm2201a
##	ili9225 lgb4525b r61503vr otm2201h
##	ili9225b ili9225br s6d0164 dc2200
##	3 QQVGA	128*160
##	ili9163 s6b33bf st7669v s6d0144
##	st7735 hx8345a fd54124bv
## （支持自适应选择，可以同时设置多个驱动）

## MainLCD
LCD_MODEL       ?=  

## LCD interface: gouda/slcd
LCD_IF          ?= 

## GOUDA can support serial LCD starting from 8808
ifeq "$(strip ${LCD_IF})" "gouda"
USE_SPI_LCD     ?= 0
endif

## Define LCD resolution:
## LCDSIZE_128_160/LCDSIZE_176_220/LCDSIZE_240_320
GLOBAL_EXPORT_FLAG += LCDSIZE_128_160

## 将QQVGA放大到QCIF
#GLOBAL_EXPORT_FLAG    += LCD_SCALE_128_160_TO_176_220

## SubLCD
SUBLCD_MODEL	?= 

ifneq "$(strip ${SUBLCD_MODEL})" ""
## SubLCD interface: gouda/slcd
SUBLCD_IF       ?= gouda

## GOUDA can support serial LCD starting from 8808
ifeq "$(strip ${SUBLCD_IF})" "gouda"
USE_SPI_SUBLCD  ?= 0
endif

## Define SUB LCD resolution
## SUBLCDSIZE_128_128/SUBLCDSIZE_96_64/SUBLCDSIZE_64_96
GLOBAL_EXPORT_FLAG += SUBLCDSIZE_128_128
endif # SUBLCD_MODEL

## Whether to enable charge pump to avoid screen flicker
## (If enabled, AUD_SPK_LINE_CLASS_MODE must be set to class_k)
LCD_BACKLIGHT_CHARGE_PUMP ?= 0


#=====================================
##  6 ##
######## CAMERA驱动 ########

##1 OmniVision OV7660 VGA
##  OmniVision OV7670 VGA
##  OmniVision OV7675 VGA
##2 GalaxyCore GC0306 VGA
##  GalaxyCore GC0307 VGA
##  GalaxyCore GC0309 VGA
##3 BYD BYD3503 VGA
##  BYD BYD3603 VGA
##  BYD BYD3703 VGA
##4 HYNIX YACBAA0SDDAS VGA
##  HYNIX HYA10S VGA
##5 SET SIV100B VGA
##6 Superpix SP80818 VGA  
## （支持自适应选择，可以同时设置多个驱动）
CAMERA_MODEL    ?= 

## Camera model interface: parallel/spi
## 对于spi接口，8805/8806只支持pas6175与sp0828，
##     而且必须与串口LCD配合使用；
##     后续芯片(8808及以后)则无此限制。
## 对于gc6113串口摄像头，需要使用并口模拟串口时，
##     接口需配置成parallel，而且不能与串口LCD配合使用;
##     8805/8806只支持并口模拟串口的方式；
##     后续芯片(8808及以后)则无此限制。
CAMERA_IF       ?= 

## 支持双camera
#TARGET_EXPORT_FLAG += SUPPORT_DUAL_CAMERA

## 是否支持大照片拍摄(要求有足够内存)
GLOBAL_EXPORT_FLAG += MEM_3216_CAMERA_LARGE_MODE

## 使用8w sensor时，必须打开；
## 如果ULC（3216）项目中使用30w sensor，建议打开;
## 注意不能和_CAM_SPECIAL_GC6113_同时定义
TARGET_EXPORT_FLAG += _CAM_SMALL_MEM_


#=====================================
##  7 ##
######## 蓝牙驱动 ########

## rda5870
## rda5872
## rda5875
## rda5876 (如果使用rda5875y，也需要配置成rda5876)
##（支持自适应选择，可以同时设置多个驱动）
BT_MODEL        ?= 

ifneq "$(strip ${BT_MODEL})" ""
## 当不支持A2DP的时候需要定义这个宏
#GLOBAL_EXPORT_FLAG += __BT_NO_A2DP_PROFILE__

## Define BT crystal flag
BT_SHARE_CRYSTAL ?= 1

## 蓝牙使用的32K时钟管脚: 1/0
## 1: 32K_CLK pin
## 0: CLK_OUT pin
BT_USE_32K_CLK_PIN ?= 0
endif # (${BT_MODEL},)

#TARGET_EXPORT_FLAG += __BT_PCM_OVER_UART__


#=====================================
##  8 ##
######## 模拟电视驱动 ########

## rda5888e (如果使用rda5888s，也需要配置成rda5888e)
## rda5888h
## rda5888he
ATV_MODEL       ?= 

## If 5888h or 5888he then USING I2S need set 0
#TV_USING_I2S    ?= 0

## 模拟电视使用的32K时钟管脚: 1/0
## 1: 32K_CLK pin
## 0: CLK_OUT pin
TV_USE_32K_CLK_PIN ?= 0


#=====================================
##  9 ##
######## T卡驱动 ########

## Interface: sdmmc/spi
MCD_IF          ?= 


#=====================================
## 10 ##
######## 软I2C驱动 ########

## 当配置了这项为i2c_gpio之后，会使用GPIO来软件模拟I2C接口;
## 不使用软件模拟时设置为空
I2C_MODEL       ?=


#=====================================
## 11 ##
######## GSENSOR驱动 ########

## mma7660fc
## mma7660fc_gpio
GSENSOR_MODEL   ?= 


#=====================================
## 12 ##
######## SIM卡驱动 ########

## 8805: rda1203_gallite(2卡驱动), threesimd（3卡驱动），fourdimd（4卡驱动）
## 8806/8808: rda1203_gallite_CT1129
DUALSIM_MODEL   ?= rda1203_gallite_CT1129

## 支持的多卡的数量***
NUMBER_OF_SIM   ?= 2

## 支持多卡的卡序排列***
USER_SIM_ORDER  ?= 1 2

## 如果用了SIM switch开关，就打开此宏
ifeq "$(strip ${CT_CHIP_DIE})" "8805"
#TARGET_EXPORT_FLAG    += SIM_SWITCH_USED
endif

## Whether to support USIM
USIM_SUPPORT ?= 1


#=====================================
## 13 ##
######## 音频驱动 #########

## MIC电路是否采用节省电容器的方案（是填1；否则填0）
MIC_CAPLESS_MODE ?= 1

## The usage of L&R speaker lines: both, left, right
AUD_SPK_LINE_USAGE ?= both

## Whether to enable speaker line L-R-double mode
AUD_SPK_LINE_L_R_DOUBLE ?= 1

## Whether to enable headphone charge pump mode
## (If enabled, AUD_SPK_LINE_CLASS_MODE must be set to class_k)
HEADPHONE_CHARGE_PUMP ?= 0

## Select speaker class mode: class_ab, class_d, class_k
## (If LCD_BACKLIGHT_CHARGE_PUMP or HEADPHONE_CHARGE_PUMP is
## enabled, class_k must be selected)
AUD_SPK_LINE_CLASS_MODE ?= class_d

## Receiver uses one speaker line (using left line by default)
#TARGET_EXPORT_FLAG    += RECV_USE_SPK_LINE

## If using right line, the following macro should be added as well
#TARGET_EXPORT_FLAG    += RECV_USE_SPK_LINE_R

## Alleviate the "pop" sound on loud speaker for some external audio PAs
#TARGET_EXPORT_FLAG    += AUD_SPK_ON_WITH_LCD

# ABB headphone detection
#TARGET_EXPORT_FLAG += ABB_HP_DETECT


#=====================================
## 14 ##
######## 射频驱动 #########

## pasw_rda6231
## pasw_rda6625
PA_MODEL        ?= pasw_rda6231

## RF优化选项
## 若XCV直接控制PA与SW的可以打开此宏，若TCO控制则必须关掉此宏（请先咨询FAE）
TARGET_EXPORT_FLAG += INTERNAL_XCV_CONTROL_PASW
TARGET_EXPORT_FLAG += __RF_RDAPASW_TWOBAND_AS_FOURBAND__

## PA RAMP电容是否使用220pF: 1/0
PA_VRAMP_220PF ?= 1


#=====================================
## 15 ##
######## WIFI驱动 #########

## rdawifi
WIFI_MODEL      ?= 

## WIFI使用的32K时钟管脚: 1/0
## 1: 32K_CLK pin
## 0: CLK_OUT pin
WIFI_USE_32K_CLK_PIN ?= 0


#=====================================
## 16 ##
######## 32K时钟配置 #########

## 基带芯片是否使用外部晶体提供的32K时钟（XTAL32K_IN管脚）：1/0
## （注意：8805/8806芯片不需要配置此选项）
USE_EXT_XTAL_32K ?= 0


#=====================================
## 17 ##
######## GPRS支持 ########

## 1为支持GPRS，0为不支持
GPRS_SUPPORT ?= 1
EGPRS_SUPPORT ?= 1

## 1为支持PPP，0为不支持
PPP_SUPPORT ?= 1

## 当运行camera/video player/video recorder等应用时不自动下载彩信内容，
## 只下载彩信通知，用户可以之后手动下载彩信内容
## 对于读写速度较慢的flash，需要定义
#GLOBAL_EXPORT_FLAG += MANUAL_DOWNLOAD_MMS


#=====================================
## 18 ##
######## 射频校准屏幕显示支持 ########

## Screen display in RF calibration: 1/0
## 如果不在这里设置，CES_DISPLAY会在platform/calib被默认设置为1;
## 对于ULC项目可以将其设置为0，以节省flash空间
CES_DISPLAY ?= 0


#######################################
## PART C
##-------------------------------------
## 应用描述信息
#######################################


#=====================================
## 19 ##
######## 资源包 ########

## 选择application/target_res目录下的资源包；
## 设置为空则选择系统默认的资源包
CT_ERES ?= g021_441_3216


#=====================================
## 20 ##
######## ULC选项 ########

## 是否启用ULC: YES/NO (注意都是大写字母!)
TARGET_MEM_ULC_3216 ?= YES


#=====================================
## 21 ##
######## 空间压缩 ########

## 是否启用压缩代码: yes/no
CT_COMPRESS_CODE_SECTION ?= no

## 是否启用字符串资源压缩
MMI_EXPORT_FLAG += COMPRESS_OPTIMIZE_FLASH_SIZE
MMI_EXPORT_FLAG += COMPRESS_USE_LZMA

ifeq "$(strip ${CT_COMPRESS_CODE_SECTION})" "yes"
## Compression state: 3232/3264/6464 or set to null
COMPRESS_STATE ?= 
## Compression strategy (please consult FAE):
## 1/2 or set to null
COMPRESS_STRATEGY ?= 

#TARGET_EXPORT_FLAG += __CODE_DECOMPRESS_WITH_VOC__
endif

#=====================================
## 22 ##
######## USB支持类型 ########

## umss_storage_flashmc表示支持FLASH和T卡U盘
## umss_storage_mc 表示仅支持T卡U盘
UCTLS_SERVICE   ?= umss_storage_flashmc


#=====================================
## 23 ##
######## 多国语言设置 ########

SUPPORT_MULTI_LANG_FRENCH			:= NO	#French
SUPPORT_MULTI_LANG_ITALIAN			:= NO	#Italian
SUPPORT_MULTI_LANG_VIETNAMESE		:= NO	#Vietnamese
SUPPORT_MULTI_LANG_RUSSIAN			:= NO	#Russian
SUPPORT_MULTI_LANG_ARABIC			:= NO	#Arabic
SUPPORT_MULTI_LANG_THAI				:= NO	#Thai
SUPPORT_MULTI_LANG_SM_CHINESE		:= YES	#SM Chinese,NOTE: can't work together with TR chinese
SUPPORT_MULTI_LANG_TR_CHINESE		:= NO	#TR Chinese,NOTE: can't work together with SM chinese
SUPPORT_MULTI_LANG_GERMAN			:= NO	#German
SUPPORT_MULTI_LANG_SPANISH			:= NO	#Spanish
SUPPORT_MULTI_LANG_PORTUGUESE		:= NO	#Portuguese
SUPPORT_MULTI_LANG_PERSIAN			:= NO	#Persian
SUPPORT_MULTI_LANG_URDU				:= NO	#Urdu
SUPPORT_MULTI_LANG_TURKISH			:= NO	#Turkish
SUPPORT_MULTI_LANG_INDONESIAN		:= NO	#Indonesian
SUPPORT_MULTI_LANG_MALAY			:= NO	#Malay
SUPPORT_MULTI_LANG_ZULU				:= NO	#Zulu
SUPPORT_MULTI_LANG_XHOSA			:= NO	#Xshosa
SUPPORT_MULTI_LANG_SWAHILI			:= NO	#Swahili
SUPPORT_MULTI_LANG_CZECH			:= NO	#Czech
SUPPORT_MULTI_LANG_POLISH			:= NO	#Polish
SUPPORT_MULTI_LANG_HUNGARIAN		:= NO	#Hungarian
SUPPORT_MULTI_LANG_NORWEGIAN		:= NO	#Norwegian
SUPPORT_MULTI_LANG_SLOVAK			:= NO	#Slovak
SUPPORT_MULTI_LANG_DUTCH			:= NO	#Dutch
SUPPORT_MULTI_LANG_SWEDISH			:= NO	#Swedish
SUPPORT_MULTI_LANG_CROATIAN			:= NO	#Croatian
SUPPORT_MULTI_LANG_SLOVENIAN		:= NO	#Slovenian
SUPPORT_MULTI_LANG_AFRIKAANS		:= NO	#Afrikaans
SUPPORT_MULTI_LANG_LITHUANIAN		:= NO	#Lithuanian
SUPPORT_MULTI_LANG_LATVIAN			:= NO	#Latvian
SUPPORT_MULTI_LANG_ESTONIAN			:= NO	#Estonian
SUPPORT_MULTI_LANG_MOLDOVAN			:= NO	#Moldovan
SUPPORT_MULTI_LANG_ALBANIAN			:= NO	#Albanian 
SUPPORT_MULTI_LANG_CA_FRENCH		:= NO	#Ca_French
SUPPORT_MULTI_LANG_SA_SPANISH		:= NO	#Latin.Am.Spanish
SUPPORT_MULTI_LANG_SA_PORTUGUESE	:= NO	#Brazil.Portuguese
SUPPORT_MULTI_LANG_SESOTHO			:= NO	#Sesotho
SUPPORT_MULTI_LANG_TAGALOG			:= NO	#Tagalog
SUPPORT_MULTI_LANG_UK_ENGLISH		:= NO	#UK Eenglish
SUPPORT_MULTI_LANG_YORUBA			:= NO	#Yoruba
SUPPORT_MULTI_LANG_AZERBAIJANI		:= NO	#Azerbaijani
SUPPORT_MULTI_LANG_CATALAN			:= NO	#Catalan
SUPPORT_MULTI_LANG_ICELANDIC		:= NO	#Icelandic
SUPPORT_MULTI_LANG_DANISH			:= NO	#Danish
SUPPORT_MULTI_LANG_FINNISH			:= NO	#Finnish
SUPPORT_MULTI_LANG_ROMANIAN			:= NO	#Romanian
SUPPORT_MULTI_LANG_HAUSA			:= NO	#Hausa
SUPPORT_MULTI_LANG_BULGARIAN		:= NO	#Bulgarian
SUPPORT_MULTI_LANG_UKRAINIAN		:= NO	#Ukrainian
SUPPORT_MULTI_LANG_MACEDONIAN		:= NO	#Macedonian
SUPPORT_MULTI_LANG_SERBIAN			:= NO	#Serbian
SUPPORT_MULTI_LANG_GREEK			:= NO	#Greek
SUPPORT_MULTI_LANG_HEBREW			:= NO	#Hebrew
SUPPORT_MULTI_LANG_UYGHUR			:= NO	#Uyghur

#these languages support need open IndicLanguages macro
SUPPORT_MULTI_LANG_INDIC_LANGUAGES 	:= NO
SUPPORT_MULTI_LANG_HINDI          	:= NO	 #Hindi
SUPPORT_MULTI_LANG_TELUGU         	:= NO    #Telugu
SUPPORT_MULTI_LANG_PUNJABI        	:= NO    #Punjabi
SUPPORT_MULTI_LANG_BENGALI        	:= NO    #Bengali
SUPPORT_MULTI_LANG_MARATHI        	:= NO    #Marathi
SUPPORT_MULTI_LANG_MYANMAR			:= NO    #Mayanmar
SUPPORT_MULTI_LANG_TAMIL          	:= NO    #Tamil
SUPPORT_MULTI_LANG_ASSAMESE			:= NO	 #Assamese
SUPPORT_MULTI_LANG_ORIYA          	:= NO    #Malay
SUPPORT_MULTI_LANG_KANNADA        	:= NO    #Malay
SUPPORT_MULTI_LANG_MALAYALAM      	:= NO    #Malay

#################################################################

#=====================================
## 24 ##
######## 文件系统 ########

## 当使用的FLASH为单BANKFLASH的时候，需要打开
#TARGET_EXPORT_FLAG += USER_DATA_CACHE_SUPPORT
#TARGET_EXPORT_FLAG += FACT_SETTING_CACHE_SUPPORT

## 将文件系统REG区和sms区合并为CSW区，
## 节省代码空间，客户无需修改,
## 若存储的SMS数较多则需要注销此宏
TARGET_EXPORT_FLAG += _REG_SMS_MERGE


#=====================================
## 25 ##
######## 功能选项 ########

## Video player功能: 1/0
## 如果不在这里设置，VIDEO_PLAYER_SUPPORT会在后面被默认设置为1;
## 对于ULC项目可以将其设置为0，取消video player功能以节省flash空间
#VIDEO_PLAYER_SUPPORT ?= 0

## sound recorder功能: 1/0
SOUND_RECORDER_SUPPORT ?= 0

## Video recorder功能: 1/0
VIDEO_RECORDER_SUPPORT ?= 0

ifeq "$(strip ${VIDEO_RECORDER_SUPPORT})" "1"
##
## VDOREC_MODE_QVGA: QVGA(320x240) recording
## VDOREC_MODE_VGA: VGA(640x480) recording
## If neither is declared, QQVGA(160x120) recording by default
## Neither macro is recommended to declare unless on 8808 platform
##
#GLOBAL_EXPORT_FLAG += VDOREC_MODE_VGA

##
## VIDREC_FAST_RECORDING: 15 frames per second, only available for QVGA/QQVGA recording
## If it is not declared, 10 fps for QVGA/QQVGA by default.
##
#GLOBAL_EXPORT_FLAG += VIDREC_FAST_RECORDING
endif

## 使用camera模拟2d sensor: 1/0
ifneq "$(strip ${CAMERA_MODEL})" ""
CAM_MD_SUPPORT ?= 0
endif

## 魔音功能: 1/0
MAGIC_AE_SUPPORT ?= 0

## RMVB播放解码支持: 1/0
## 此功能需求的内存较大，总共约760KB
MEDIA_RM_SUPPORT ?= 0

## MIDI播放支持: 1/0
MEDIA_MIDI_SUPPORT ?= 0

## display a picture early when power on 
#GLOBAL_EXPORT_FLAG += __DISPLAY_POWERON_LOGO__

## 支持T卡热插拔
#MMI_EXPORT_FLAG       += __TFLASH_MOUNT_DYNAMIC__

## 这个宏开关，用来控制是否支持自动记录按键信息，
## 通常用于记录出问题之前的按键信息，方便工程人员复现问题
## 打开这个宏会额外占用大约9KByte的空间，可以根据实际情况
## 考虑是否打开这个功能
#MMI_EXPORT_FLAG += AUTO_TEST_KEYPRESS_RECORD_SUPPORT

## 定义短消息和电话本的条目
## PHONE_SMS_ENTRY_COUNT表征FLASH上多卡项目总计SMS容量，
## 单卡数目为PHONE_SMS_ENTRY_COUNT/SIM_COUNT
## SIM_SMS_ENTRY_COUNT表征SIM卡上最大SMS容量，请勿修改
GLOBAL_EXPORT_FLAG += PHONE_SMS_ENTRY_COUNT=100
GLOBAL_EXPORT_FLAG += SIM_SMS_ENTRY_COUNT=255
GLOBAL_EXPORT_FLAG += PHONE_PHB_ENTRY_COUNT=50

## 电话本选项
#MMI_EXPORT_FLAG += __MMI_PHB_SLIM_OPTIONAL_FIELD__
#MMI_EXPORT_FLAG += __PHB_CALLER_IMAGE_SAVE_PATH_ONLY__


#######################################
## PART D
##-------------------------------------
## 编译调试描述信息
#######################################


#=====================================
## 26 ##
######## 编译优化选项 ########

## 编译代码空间优化
CT_OPT ?= dbg_size

## 编译时候遇到warnning不停止编译
WITHOUT_WERROR ?= 1

# Export board information to lod: yes/no
EXPORT_BOARD_INFO ?= yes
# User defined board information
EXPORT_BOARD_FLAGS ?= PM_MODEL ATV_MODEL FM_MODEL


#=====================================
## 27 ##
######## 调试选项 ########

## 通过SPI调试射频寄存器参数
TARGET_EXPORT_FLAG += SPI_REG_DEBUG

## For FS debug ,open ASSERT in FS layer
TARGET_EXPORT_FLAG += _FS_DEBUG

## Profile
## Enable this macro if profile is needed in any module
TARGET_EXPORT_FLAG += HAL_PROFILE_ON_BUFFER
## Individual modules
TARGET_EXPORT_FLAG += SX_PROFILING
TARGET_EXPORT_FLAG += PAL_PROFILING
TARGET_EXPORT_FLAG += HAL_PROFILING
TARGET_EXPORT_FLAG += STK_PROFILING
TARGET_EXPORT_FLAG += AT_PROFILING
#TARGET_EXPORT_FLAG += PMD_PROFILING
#TARGET_EXPORT_FLAG += TSD_PROFILING
#TARGET_EXPORT_FLAG += DUALSIMD_PROFILING

## Trace
## Disable this macro if trace is needed in any module
#TARGET_EXPORT_FLAG += SXS_NO_PRINTF
## Individual modules
TARGET_EXPORT_FLAG += MMI_NO_TRACE
#TARGET_EXPORT_FLAG += CSW_NO_TRACE
TARGET_EXPORT_FLAG += MCI_NO_TRACE
TARGET_EXPORT_FLAG += STACK_NO_PRINTF
#TARGET_EXPORT_FLAG += HAL_NO_PRINTF
#TARGET_EXPORT_FLAG += PAL_NO_TRACE
TARGET_EXPORT_FLAG += VOIS_NO_PRINTF
#TARGET_EXPORT_FLAG += EDRV_NO_TRACE
TARGET_EXPORT_FLAG += CALIB_NO_PRINTF
TARGET_EXPORT_FLAG += UCTLS_NO_PRINTF
TARGET_EXPORT_FLAG += UMSS_NO_PRINTF
TARGET_EXPORT_FLAG += ARS_NO_PRINTF
TARGET_EXPORT_FLAG += RFD_NO_TRACE
## Dump
#TARGET_EXPORT_FLAG += SXS_NO_DUMP

## 系统启动时，尽早打开trace
#TARGET_EXPORT_FLAG += EARLY_TRACE_OPEN


#######################################
## PART E
##-------------------------------------
## 项目定制信息
#######################################


#=====================================
## 28 ##
######## 与资源包相关的设置 ######

## 是否需要下面这些设置取决于CT_ERES指定的资源包

## 日历
#MMI_EXPORT_FLAG += CALENDAR_SUPPORT
## 任务
#MMI_EXPORT_FLAG += TODOLIST_SUPPORT
## 工具箱
#MMI_EXPORT_FLAG += ORGANIZER_SUPPORT

## More ...



#=====================================
## 29 ##
######## 项目特有功能 ######

#GLOBAL_EXPORT_FLAG += PROJ_XXX
#TARGET_EXPORT_FLAG  += lcd_line_8_low

#GLOBAL_EXPORT_FLAG += __MMI_NEW_NVRAM_INTERFACE__

# Support remote keypad simulation
TARGET_EXPORT_FLAG += REMOTE_KEYPAD_SIMU

GLOBAL_EXPORT_FLAG += XCV_USE_LNA

#######################################
## PART Z
##-------------------------------------
## 通用设置，请勿修改，并保证此部分在文件的最后
#######################################

include ${SOFT_WORKDIR}/target/target_common.def