diff --git a/dev/advanced/index.html b/dev/advanced/index.html index 6f50d63d..38da89ed 100644 --- a/dev/advanced/index.html +++ b/dev/advanced/index.html @@ -79,4 +79,4 @@ julia>

A second run of this command needs about 5.5 s which means the startup time (load and compilation time of the package and the libraries) has been reduced to about 18.4s.

Without a system image the first time execution of the script "simulate_simple.jl" on the same computer is about 71 seconds while the time for the second execution is the same (5.5s). So now about 47s of time are saved after each restart.

Hints for Developers

Coding style

Bad: norm1 .~ norm(segment) Good: norm1 ~ norm(segment)

    tether_rhs        = [force_eqs[j, i].rhs for j in 1:3]
     kite_rhs          = [force_eqs[j, i+3].rhs for j in 1:3]
-    f_xy              = dot(tether_rhs, e_z) * e_z

Outlook

The next steps:

+ f_xy = dot(tether_rhs, e_z) * e_z

Outlook

The next steps:

diff --git a/dev/examples/index.html b/dev/examples/index.html index e7b09f4e..638f608d 100644 --- a/dev/examples/index.html +++ b/dev/examples/index.html @@ -50,4 +50,4 @@ 3-element StaticArrays.MVector{3, Float64} with indices SOneTo(3): 12.54966091924401 0.0 - 0.0

Example of reeling out the tether

include("examples/reel_out_1p.jl")

Reel out 1p model

In this example, we first keep the tether length constant and at 15 s start to reel out the winch with an acceleration of 0.1 m/s². At a set speed below 2.2 m/s the brake of the winch is active, therefore the "jump" in the v_reelout at the beginning of the reel-out phase.

It is not a real jump, but a high acceleration compared to the acceleration afterward.

+ 0.0

Example of reeling out the tether

include("examples/reel_out_1p.jl")

Reel out 1p model

In this example, we first keep the tether length constant and at 15 s start to reel out the winch with an acceleration of 0.1 m/s². At a set speed below 2.2 m/s the brake of the winch is active, therefore the "jump" in the v_reelout at the beginning of the reel-out phase.

It is not a real jump, but a high acceleration compared to the acceleration afterward.

diff --git a/dev/examples_4p/index.html b/dev/examples_4p/index.html index b97e2cc0..d9bd65a0 100644 --- a/dev/examples_4p/index.html +++ b/dev/examples_4p/index.html @@ -63,4 +63,4 @@ 3-element StaticArrays.MVector{3, Float64} with indices SOneTo(3): 12.542508333667467 0.0 - 0.0

Example of reeling out the tether

include("examples/reel_out_4p.jl")

Reel out 4p model

In this example, we first keep the tether length constant and at 15 s start to reel out the winch with an acceleration of 0.1 m/s². At a set speed below 2.2 m/s the brake of the winch is active, therefore the "jump" in the v_reelout at the beginning of the reel-out phase.

It is not a real jump, but a high acceleration compared to the acceleration afterward.

+ 0.0

Example of reeling out the tether

include("examples/reel_out_4p.jl")

Reel out 4p model

In this example, we first keep the tether length constant and at 15 s start to reel out the winch with an acceleration of 0.1 m/s². At a set speed below 2.2 m/s the brake of the winch is active, therefore the "jump" in the v_reelout at the beginning of the reel-out phase.

It is not a real jump, but a high acceleration compared to the acceleration afterward.

diff --git a/dev/functions/index.html b/dev/functions/index.html index 09c40e23..8b7f1e44 100644 --- a/dev/functions/index.html +++ b/dev/functions/index.html @@ -1,8 +1,8 @@ Functions · KiteModels.jl
Edit on GitHub

Introduction

Most of the functions work on a KPS3 or KPS4 object. For this, the variable s is used. Such a variable can be created with the lines:

using KiteSimulators
 const s = KPS3(KCU(se()))

Or, if you want to use the 4 point kite model:

using KiteSimulators
-const s = KPS4(KCU(se()))

Functions with an "!" as last character of the function name modify one of more of their parameters, in this context mostly the variable s.

Input functions

KiteModels.set_depower_steering! — Function
set_depower_steering!(s::AKM, depower, steering)

Setter for the depower and steering model inputs.

Parameters:

  • depower: Relative depower, must be between 0 .. 1.0
  • steering: Relative steering, must be between -1.0 .. 1.0.

This function sets the variables s.depower, s.steering and s.alpha_depower.

It takes the depower offset c0 and the dependency of the steering sensitivity from the depower settings into account.

source
KiteModels.set_v_wind_ground! — Function
set_v_wind_ground!(s::AKM, height, v_wind_gnd=s.set.v_wind; upwind_dir=0.0)

Set the vector of the wind-velocity at the height of the kite. As parameter the height, the ground wind speed [m/s] and the upwind direction [radians] are needed. Is called by the function next_step!.

source

Output functions

KiteModels.unstretched_length — Function
unstretched_length(s::KPS4_3L)

Getter for the unstretched tether reel-out lenght (at zero force).

source
unstretched_length(s::AKM)

Getter for the unstretched tether reel-out lenght (at zero force).

source
KiteModels.tether_length — Function
tether_length(s::KPS4_3L)

Calculate and return the real, stretched tether lenght.

source
tether_length(s::AKM)

Calculate and return the real, stretched tether lenght.

source
KiteModels.pos_kite — Function
pos_kite(s::KPS4)

Return the position of the kite (top particle).

source
pos_kite(s::KPS4_3L)

Return the position of the kite (top particle).

source
pos_kite(s::KPS3)

Return the position of the kite (top particle).

source
KiteModels.calc_height — Function
calc_height(s::KPS4)

Determine the height of the topmost kite particle above ground.

source
calc_height(s::KPS4_3L)

Determine the height of the topmost kite particle above ground.

source
calc_height(s::KPS3)

Determine the height of the kite particle above ground.

source
KiteModels.calc_azimuth — Function
calc_azimuth(s::AKM)

Determine the azimuth angle of the kite in wind reference frame in radian. Positive anti-clockwise when seen from above.

source
KiteUtils.calc_heading — Function
calc_heading(s::AKM; upwind_dir_=upwind_dir(s), neg_azimuth=false, one_point=false)

Determine the heading angle of the kite in radian.

source
KiteUtils.calc_course — Function
calc_course(s::AKM)

Determine the course angle of the kite in radian. Undefined if the velocity of the kite is near zero.

source
KiteModels.cl_cd — Function
cl_cd(s::KPS4)

Calculate the lift and drag coefficients of the kite, based on the current angles of attack.

source
KiteModels.winch_force — Function
winch_force(s::KPS4)

Return the absolute value of the force at the winch as calculated during the last timestep.

source
winch_force(s::KPS4_3L)

Return the absolute value of the force at the winch as calculated during the last timestep.

source
winch_force(s::KPS3)

Return the absolute value of the force at the winch as calculated during the last timestep.

source
KiteModels.lift_drag — Function
lift_drag(s::AKM)

Return a tuple of the scalar lift and drag forces.

Example: 

lift, drag = lift_drag(s)
source
KiteModels.kite_ref_frame — Function
kite_ref_frame(s::KPS4; one_point=false)

Returns a tuple of the x, y, and z vectors of the kite reference frame.

source
kite_ref_frame(s::KPS4_3L; one_point=false)

Returns a tuple of the x, y, and z vectors of the kite reference frame. The parameter one_point is not used in this model.

source
kite_ref_frame(s::KPS3)

Returns a tuple of the x, y, and z vectors of the kite reference frame.

source
KiteModels.orient_euler — Function
orient_euler(s::AKM)

Calculate and return the orientation of the kite in euler angles (roll, pitch, yaw) as SVector.

source
KiteUtils.SysState — Type
SysState(s::AKM, zoom=1.0)

Constructor for creating a SysState object from a kite model (KPS3 or KPS4). The SysState object can be used either for logging or for displaying the system state in a viewer. Optionally the position arrays can be zoomed according to the requirements of the viewer.

source

High level simulation interface

KiteModels.init_sim! — Function
init_sim!(s; damping_coeff=1.0, prn=false, torque_control=true)

Initialises the integrator of the model.

Parameters:

  • s: an instance of a 3 line kite model
  • damping_coeff: amount of damping in the first steps
  • prn: if set to true, print the detailed solver results
  • torque_control: wether or not to use torque control

Returns: Nothing.

source
init_sim!(s; t_end=1.0, stiffness_factor=0.035, delta=0.01, prn=false)

Initialises the integrator of the model.

Parameters:

  • s: an instance of an abstract kite model
  • t_end: end time of the simulation; normally not needed
  • stiffness_factor: factor applied to the tether stiffness during initialisation
  • delta: initial stretch of the tether during the steady state calculation
  • prn: if set to true, print the detailed solver results
  • steadystatehistory: an instance of SteadyStateHistory containing old pairs of AKM objects and integrators

Returns: An instance of a DAE integrator.

source
KiteModels.next_step! — Function
next_step!(s::AKM, integrator; set_speed = nothing, set_torque=nothing, v_wind_gnd=s.set.v_wind, upwind_dir=-pi/2, 
-           dt=1/s.set.sample_freq)

Calculates the next simulation step.

Parameters:

  • s: an instance of an abstract kite model
  • integrator: an integrator instance as returned by the function init_sim!
  • set_speed: set value of reel out speed in m/s or nothing
  • set_torque: set value of the torque in Nm or nothing
  • v_wind_gnd: wind speed at reference height in m/s
  • upwind_dir: upwind direction in radians, the direction the wind is coming from. Zero is at north; clockwise positive. Default: -pi/2, wind from west.
  • dt: time step in seconds

Either a value for set_speed or for set_torque required.

Returns: The end time of the time step in seconds.

source

Low level simulation interface

KiteModels.clear! — Function
clear!(s::KPS4)

Initialize the kite power model.

source
clear!(s::KPS4_3L)

Initialize the kite power model.

source
clear!(s::KPS3)

Initialize the kite power model.

source
KiteModels.find_steady_state! — Function
find_steady_state!(s::KPS4; prn=false, delta = 0.01, stiffness_factor=0.035)

Find an initial equilibrium, based on the inital parameters l_tether, elevation and v_reel_out.

source
find_steady_state!(s::KPS3, prn=false, delta = 0.0, stiffness_factor=0.035)

Find an initial equilibrium, based on the inital parameters l_tether, elevation and v_reel_out.

source
KiteModels.residual! — Function
residual!(res, yd, y::MVector{S, SimFloat}, s::KPS4, time) where S
+const s = KPS4(KCU(se()))

Functions with an "!" as last character of the function name modify one of more of their parameters, in this context mostly the variable s.

Input functions

KiteModels.set_depower_steering! — Function
set_depower_steering!(s::AKM, depower, steering)

Setter for the depower and steering model inputs.

Parameters:

  • depower: Relative depower, must be between 0 .. 1.0
  • steering: Relative steering, must be between -1.0 .. 1.0.

This function sets the variables s.depower, s.steering and s.alpha_depower.

It takes the depower offset c0 and the dependency of the steering sensitivity from the depower settings into account.

source
KiteModels.set_v_wind_ground! — Function
set_v_wind_ground!(s::AKM, height, v_wind_gnd=s.set.v_wind; upwind_dir=0.0)

Set the vector of the wind-velocity at the height of the kite. As parameter the height, the ground wind speed [m/s] and the upwind direction [radians] are needed. Is called by the function next_step!.

source

Output functions

KiteModels.unstretched_length — Function
unstretched_length(s::KPS4_3L)

Getter for the unstretched tether reel-out lenght (at zero force).

source
unstretched_length(s::AKM)

Getter for the unstretched tether reel-out lenght (at zero force).

source
KiteModels.tether_length — Function
tether_length(s::KPS4_3L)

Calculate and return the real, stretched tether lenght.

source
tether_length(s::AKM)

Calculate and return the real, stretched tether lenght.

source
KiteModels.pos_kite — Function
pos_kite(s::KPS4)

Return the position of the kite (top particle).

source
pos_kite(s::KPS4_3L)

Return the position of the kite (top particle).

source
pos_kite(s::KPS3)

Return the position of the kite (top particle).

source
KiteModels.calc_height — Function
calc_height(s::KPS4)

Determine the height of the topmost kite particle above ground.

source
calc_height(s::KPS4_3L)

Determine the height of the topmost kite particle above ground.

source
calc_height(s::KPS3)

Determine the height of the kite particle above ground.

source
KiteModels.calc_azimuth — Function
calc_azimuth(s::AKM)

Determine the azimuth angle of the kite in wind reference frame in radian. Positive anti-clockwise when seen from above.

source
KiteUtils.calc_heading — Function
calc_heading(s::AKM; upwind_dir_=upwind_dir(s), neg_azimuth=false, one_point=false)

Determine the heading angle of the kite in radian.

source
KiteUtils.calc_course — Function
calc_course(s::AKM)

Determine the course angle of the kite in radian. Undefined if the velocity of the kite is near zero.

source
KiteModels.cl_cd — Function
cl_cd(s::KPS4)

Calculate the lift and drag coefficients of the kite, based on the current angles of attack.

source
KiteModels.winch_force — Function
winch_force(s::KPS4)

Return the absolute value of the force at the winch as calculated during the last timestep.

source
winch_force(s::KPS4_3L)

Return the absolute value of the force at the winch as calculated during the last timestep.

source
winch_force(s::KPS3)

Return the absolute value of the force at the winch as calculated during the last timestep.

source
KiteModels.lift_drag — Function
lift_drag(s::AKM)

Return a tuple of the scalar lift and drag forces.

Example: 

lift, drag = lift_drag(s)
source
KiteModels.kite_ref_frame — Function
kite_ref_frame(s::KPS4; one_point=false)

Returns a tuple of the x, y, and z vectors of the kite reference frame.

source
kite_ref_frame(s::KPS4_3L; one_point=false)

Returns a tuple of the x, y, and z vectors of the kite reference frame. The parameter one_point is not used in this model.

source
kite_ref_frame(s::KPS3)

Returns a tuple of the x, y, and z vectors of the kite reference frame.

source
KiteModels.orient_euler — Function
orient_euler(s::AKM)

Calculate and return the orientation of the kite in euler angles (roll, pitch, yaw) as SVector.

source
KiteUtils.SysState — Type
SysState(s::AKM, zoom=1.0)

Constructor for creating a SysState object from a kite model (KPS3 or KPS4). The SysState object can be used either for logging or for displaying the system state in a viewer. Optionally the position arrays can be zoomed according to the requirements of the viewer.

source

High level simulation interface

KiteModels.init_sim! — Function
init_sim!(s; damping_coeff=1.0, prn=false, torque_control=true)

Initialises the integrator of the model.

Parameters:

  • s: an instance of a 3 line kite model
  • damping_coeff: amount of damping in the first steps
  • prn: if set to true, print the detailed solver results
  • torque_control: wether or not to use torque control

Returns: Nothing.

source
init_sim!(s; t_end=1.0, stiffness_factor=0.035, delta=0.01, prn=false)

Initialises the integrator of the model.

Parameters:

  • s: an instance of an abstract kite model
  • t_end: end time of the simulation; normally not needed
  • stiffness_factor: factor applied to the tether stiffness during initialisation
  • delta: initial stretch of the tether during the steady state calculation
  • prn: if set to true, print the detailed solver results
  • steadystatehistory: an instance of SteadyStateHistory containing old pairs of AKM objects and integrators

Returns: An instance of a DAE integrator.

source
KiteModels.next_step! — Function
next_step!(s::AKM, integrator; set_speed = nothing, set_torque=nothing, v_wind_gnd=s.set.v_wind, upwind_dir=-pi/2, 
+           dt=1/s.set.sample_freq)

Calculates the next simulation step.

Parameters:

  • s: an instance of an abstract kite model
  • integrator: an integrator instance as returned by the function init_sim!
  • set_speed: set value of reel out speed in m/s or nothing
  • set_torque: set value of the torque in Nm or nothing
  • v_wind_gnd: wind speed at reference height in m/s
  • upwind_dir: upwind direction in radians, the direction the wind is coming from. Zero is at north; clockwise positive. Default: -pi/2, wind from west.
  • dt: time step in seconds

Either a value for set_speed or for set_torque required.

Returns: The end time of the time step in seconds.

source

Low level simulation interface

KiteModels.clear! — Function
clear!(s::KPS4)

Initialize the kite power model.

source
clear!(s::KPS4_3L)

Initialize the kite power model.

source
clear!(s::KPS3)

Initialize the kite power model.

source
KiteModels.find_steady_state! — Function
find_steady_state!(s::KPS4; prn=false, delta = 0.01, stiffness_factor=0.035)

Find an initial equilibrium, based on the inital parameters l_tether, elevation and v_reel_out.

source
find_steady_state!(s::KPS3, prn=false, delta = 0.0, stiffness_factor=0.035)

Find an initial equilibrium, based on the inital parameters l_tether, elevation and v_reel_out.

source
KiteModels.residual! — Function
residual!(res, yd, y::MVector{S, SimFloat}, s::KPS4, time) where S
 
 N-point tether model, four points for the kite on top:
 Inputs:
@@ -13,7 +13,7 @@
 
 Additional parameters:
 s: Struct with work variables, type KPS4
-S: The dimension of the state vector

The number of the point masses of the model N = S/6, the state of each point is represented by two 3 element vectors.

source
residual!(res, yd, y::MVector{S, SimFloat}, s::KPS3, time) where S
+S: The dimension of the state vector

The number of the point masses of the model N = S/6, the state of each point is represented by two 3 element vectors.

source
residual!(res, yd, y::MVector{S, SimFloat}, s::KPS3, time) where S
 
 N-point tether model, one point kite at the top:
 Inputs:
@@ -24,4 +24,4 @@
 
 Additional parameters:
 s: Struct with work variables, type KPS3
-S: The dimension of the state vector

The number of the point masses of the model N = S/6, the state of each point is represented by two 3 element vectors.

source

Helper functions

KiteModels.copy_bin — Function
copy_bin()

Copy the scripts createsysimage and run_julia to the folder "bin" (it will be created if it doesn't exist).

source
KiteModels.calc_drag — Function
calc_drag(s::KPS3, v_segment, unit_vector, rho, last_tether_drag, v_app_perp)

Calculate the drag of one tether segment, result stored in parameter last_tether_drag. Return the norm of the apparent wind velocity.

source
KiteModels.calc_set_cl_cd! — Function
calc_set_cl_cd!(s::KPS3, vec_c, v_app)

Calculate the lift over drag ratio as a function of the direction vector of the last tether segment, the current depower setting and the apparent wind speed. Set the calculated CL and CD values in the struct s.

source
KiteModels.calc_aero_forces! — Function
calc_aero_forces!(s::KPS4, pos, vel, rho, alpha_depower, rel_steering)

Calculates the aerodynamic forces acting on the kite particles.

Parameters:

  • pos: vector of the particle positions
  • vel: vector of the particle velocities
  • rho: air density [kg/m^3]
  • rel_depower: value between 0.0 and 1.0
  • alpha_depower: depower angle [degrees]
  • rel_steering: value between -1.0 and +1.0

Updates the vector s.forces of the first parameter.

source
KiteModels.calc_particle_forces! — Function
calc_particle_forces!(s::KPS4, pos1, pos2, vel1, vel2, spring, segments, d_tether, rho, i)

Calculate the drag force of the tether segment, defined by the parameters pos1, pos2, vel1 and vel2 and distribute it equally on the two particles, that are attached to the segment. The result is stored in the array s.forces.

source
KiteModels.inner_loop! — Function
inner_loop!(s::KPS4, pos, vel, v_wind_gnd, segments, d_tether)

Calculate the forces, acting on all particles.

Output:

  • s.forces
  • s.v_wind_tether
source
KiteModels.loop! — Function
loop!(s::KPS4, pos, vel, posd, veld)

Calculate the vectors s.res1 and calculate s.res2 using loops that iterate over all tether segments.

source
+S: The dimension of the state vector

The number of the point masses of the model N = S/6, the state of each point is represented by two 3 element vectors.

source

Helper functions

KiteModels.copy_examples — Function
copy_examples()

Copy all example scripts to the folder "examples" (it will be created if it doesn't exist).

source
KiteModels.copy_bin — Function
copy_bin()

Copy the scripts createsysimage and run_julia to the folder "bin" (it will be created if it doesn't exist).

source
KiteModels.calc_drag — Function
calc_drag(s::KPS3, v_segment, unit_vector, rho, last_tether_drag, v_app_perp)

Calculate the drag of one tether segment, result stored in parameter last_tether_drag. Return the norm of the apparent wind velocity.

source
KiteModels.calc_set_cl_cd! — Function
calc_set_cl_cd!(s::KPS3, vec_c, v_app)

Calculate the lift over drag ratio as a function of the direction vector of the last tether segment, the current depower setting and the apparent wind speed. Set the calculated CL and CD values in the struct s.

source
KiteModels.calc_aero_forces! — Function
calc_aero_forces!(s::KPS4, pos, vel, rho, alpha_depower, rel_steering)

Calculates the aerodynamic forces acting on the kite particles.

Parameters:

  • pos: vector of the particle positions
  • vel: vector of the particle velocities
  • rho: air density [kg/m^3]
  • rel_depower: value between 0.0 and 1.0
  • alpha_depower: depower angle [degrees]
  • rel_steering: value between -1.0 and +1.0

Updates the vector s.forces of the first parameter.

source
KiteModels.calc_particle_forces! — Function
calc_particle_forces!(s::KPS4, pos1, pos2, vel1, vel2, spring, segments, d_tether, rho, i)

Calculate the drag force of the tether segment, defined by the parameters pos1, pos2, vel1 and vel2 and distribute it equally on the two particles, that are attached to the segment. The result is stored in the array s.forces.

source
KiteModels.inner_loop! — Function
inner_loop!(s::KPS4, pos, vel, v_wind_gnd, segments, d_tether)

Calculate the forces, acting on all particles.

Output:

  • s.forces
  • s.v_wind_tether
source
KiteModels.loop! — Function
loop!(s::KPS4, pos, vel, posd, veld)

Calculate the vectors s.res1 and calculate s.res2 using loops that iterate over all tether segments.

source
diff --git a/dev/index.html b/dev/index.html index 188b0fa7..bec56a5f 100644 --- a/dev/index.html +++ b/dev/index.html @@ -3,4 +3,4 @@ cd test julia --project="."

Now add KiteModels from Julia's package manager, by typing 

using Pkg
 pkg"add KiteModels"

at the Julia prompt. You can run the unit tests with the command:

pkg"test KiteModels"

You can copy the examples to your project with:

using KiteModels
-KiteModels.install_examples()

This also adds the extra packages, needed for the examples to the project. Furthermore, it creates a folder data with some example input files. You can now run the examples with the command:

include("examples/menu.jl")

News

August 2024

July 2024

April 2024

Provides

The type AbstractKiteModel with the implementation KPS3, KPS4 and KPS4_3L, representing the one point, the four point kite model and the four point - three lines model, together with the high level simulation interface consisting of the functions init_sim! and next_step!. Other kite models can be added inside or outside of this package by implementing the non-generic methods required for an AbstractKiteModel.

Additional functions to provide inputs and outputs of the model on each time step. In particular the constructor SysState can be called once per time step to create a SysState struct for logging or for displaying the state in a viewer. Per time step the residual! function is called as many times as needed to find the solution at the end of the time step. The formulas are based on basic physics and aerodynamics and can be quite simple because a differential algebraic notation is used.

Four point kite power system model

Reference frames and control inputs

A definition of the reference frames can be found here .

Further reading

The one point and four point kite models are described in detail in Dynamic Model of a Pumping Kite Power System.

See also

Authors: Uwe Fechner (uwe.fechner.msc@gmail.com) and Bart van de Lint

+KiteModels.install_examples()

This also adds the extra packages, needed for the examples to the project. Furthermore, it creates a folder data with some example input files. You can now run the examples with the command:

include("examples/menu.jl")

News

August 2024

July 2024

April 2024

Provides

The type AbstractKiteModel with the implementation KPS3, KPS4 and KPS4_3L, representing the one point, the four point kite model and the four point - three lines model, together with the high level simulation interface consisting of the functions init_sim! and next_step!. Other kite models can be added inside or outside of this package by implementing the non-generic methods required for an AbstractKiteModel.

Additional functions to provide inputs and outputs of the model on each time step. In particular the constructor SysState can be called once per time step to create a SysState struct for logging or for displaying the state in a viewer. Per time step the residual! function is called as many times as needed to find the solution at the end of the time step. The formulas are based on basic physics and aerodynamics and can be quite simple because a differential algebraic notation is used.

Four point kite power system model

Reference frames and control inputs

A definition of the reference frames can be found here .

Further reading

The one point and four point kite models are described in detail in Dynamic Model of a Pumping Kite Power System.

See also

Authors: Uwe Fechner (uwe.fechner.msc@gmail.com) and Bart van de Lint

diff --git a/dev/parameters/index.html b/dev/parameters/index.html index 26b698cd..b8d47b29 100644 --- a/dev/parameters/index.html +++ b/dev/parameters/index.html @@ -65,4 +65,4 @@ rho_0: 1.225 # air density at the ground or zero [kg/m³] alpha: 0.08163 # exponent of the wind profile law z0: 0.0002 # surface roughness [m] - profile_law: 6 # 1=EXP, 2=LOG, 3=EXPLOG, 4=FAST_EXP, 5=FAST_LOG, 6=FAST_EXPLOG + profile_law: 6 # 1=EXP, 2=LOG, 3=EXPLOG, 4=FAST_EXP, 5=FAST_LOG, 6=FAST_EXPLOG diff --git a/dev/quickstart/index.html b/dev/quickstart/index.html index 796c6d54..74ea4ac4 100644 --- a/dev/quickstart/index.html +++ b/dev/quickstart/index.html @@ -42,4 +42,4 @@ PRINT = false STATISTIC = false

Now you can quit Julia with the command exit(). If you want to launch Julia again, be sure to be in the correct folder and then type julia --project. Without the parameter --project it will not load your project settings.

The first run of the script will be slow because Julia must compile the code. The second and any further run is very fast, but only as long as you do not leave your Julia session.

Comparing the one-point and the four-point kite model

Start Julia in the project folder you created before:

cd test
 julia --project

and then execute the command

using KiteModels
-include("examples/compare_kps3_kps4.jl")

Use the command include("examples\\compare_kps3_kps4.jl") on Windows.

The last view of the animation should look like this:

Initial State

You can save what you see with the command savefig("kite.png").

Exercise

Modify the variable ALPHA_ZERO in line 11 of the script until the lift force of the 1 point model and the 4 point model match.

Questions?

If you have any questions, please ask in the Julia Discourse forum in the section modelling and simulation , or in in the section First steps . The Julia community is very friendly and responsive.

+include("examples/compare_kps3_kps4.jl")

Use the command include("examples\\compare_kps3_kps4.jl") on Windows.

The last view of the animation should look like this:

Initial State

You can save what you see with the command savefig("kite.png").

Exercise

Modify the variable ALPHA_ZERO in line 11 of the script until the lift force of the 1 point model and the 4 point model match.

Questions?

If you have any questions, please ask in the Julia Discourse forum in the section modelling and simulation , or in in the section First steps . The Julia community is very friendly and responsive.

diff --git a/dev/search/index.html b/dev/search/index.html index ca61c7ae..6f320a5c 100644 --- a/dev/search/index.html +++ b/dev/search/index.html @@ -1,2 +1,2 @@ -Search · KiteModels.jl

Loading search...

    +Search · KiteModels.jl

    Loading search...

      diff --git a/dev/types/index.html b/dev/types/index.html index 17b4207a..d54af893 100644 --- a/dev/types/index.html +++ b/dev/types/index.html @@ -1,2 +1,2 @@ -Types · KiteModels.jl
      Edit on GitHub

      Exported Types

      Basic types

      KiteModels.SimFloat — Type
      const SimFloat = Float64

      This type is used for all real variables, used in the Simulation. Possible alternatives: Float32, Double64, Dual Other types than Float64 or Float32 do require support of Julia types by the solver.

      source
      KiteModels.KVec3 — Type

      const KVec3 = MVector{3, SimFloat}

      Basic 3-dimensional vector, stack allocated, mutable.

      source
      KiteModels.SVec3 — Type

      const SVec3 = SVector{3, SimFloat}

      Basic 3-dimensional vector, stack allocated, immutable.

      source
      KiteModels.AbstractKiteModel — Type
      abstract type AbstractKiteModel

      All kite models must inherit from this type. All methods that are defined on this type must work with all kite models. All exported methods must work on this type.

      source

      Struct KPS3 and KPS4 and KPS4_3L

      KiteModels.KPS3 — Type
      mutable struct KPS3{S, T, P} <: AbstractKiteModel

      State of the kite power system. Parameters:

      • S: Scalar type, e.g. SimFloat In the documentation mentioned as Any, but when used in this module it is always SimFloat and not Any.
      • T: Vector type, e.g. MVector{3, SimFloat}
      • P: number of points of the system, segments+1

      Normally a user of this package will not have to access any of the members of this type directly, use the input and output functions instead.

      • set::Settings: Reference to the settings struct

      • kcu::KCU: Reference to the KCU model (Kite Control Unit as implemented in the package KitePodModels

      • am::AtmosphericModel: Reference to the atmospheric model as implemented in the package AtmosphericModels Default: AtmosphericModel()

      • wm::Union{Nothing, AbstractWinchModel}: Reference to winch model as implemented in the package WinchModels Default: nothing

      • iter::Int64: Iterations, number of calls to the function residual! Default: 0

      • calc_cl::Dierckx.Spline1D: Function for calculation the lift coefficent, using a spline based on the provided value pairs.

      • calc_cd::Dierckx.Spline1D: Function for calculation the drag coefficent, using a spline based on the provided value pairs.

      • v_wind::Any: wind vector at the height of the kite Default: zeros(S, 3)

      • v_wind_gnd::Any: wind vector at reference height Default: zeros(S, 3)

      • v_wind_tether::Any: wind vector used for the calculation of the tether drag Default: zeros(S, 3)

      • v_apparent::Any: apparent wind vector at the kite Default: zeros(S, 3)

      • v_app_perp::Any: vector, perpendicular to vapparent; output of calcdrag Default: zeros(S, 3)

      • drag_force::Any: drag force of kite and bridle; output of calcaeroforces Default: zeros(S, 3)

      • lift_force::Any: lift force of the kite; output of calcaeroforces Default: zeros(S, 3)

      • steering_force::Any: steering force acting on the kite; output of calcaeroforces Default: zeros(S, 3)

      • last_force::Any: Default: zeros(S, 3)

      • spring_force::Any: spring force of the current tether segment, output of calc_res Default: zeros(S, 3)

      • total_forces::Any: Default: zeros(S, 3)

      • force::Any: sum of spring and drag forces acting on the current segment, output of calc_res Default: zeros(S, 3)

      • unit_vector::Any: unit vector in the direction of the current tether segment, output of calc_res Default: zeros(S, 3)

      • av_vel::Any: average velocity of the current tether segment, output of calc_res Default: zeros(S, 3)

      • kite_y::Any: y-vector of the kite fixed referense frame, output of calcaeroforces Default: zeros(S, 3)

      • segment::Any: vector representing one tether segment (p1-p2) Default: zeros(S, 3)

      • last_tether_drag::Any: vector of the drag force of the last calculated tether segment Default: zeros(S, 3)

      • vec_z::Any: z vector of the kite reference frame Default: zeros(S, 3)

      • res1::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: part one of the residual, difference between pos' and vel, non-flat, mainly for unit testing Default: zeros(SVector{P, KVec3})

      • res2::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: part two of the residual, difference between vel' and acc, non-flat, mainly for unit testing Default: zeros(SVector{P, KVec3})

      • pos::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: vector of the positions of the particles Default: zeros(SVector{P, KVec3})

      • vel_kite::Any: velocity vector of the kite Default: zeros(S, 3)

      • seg_area::Any: area of one tether segment [m²] Default: zero(S)

      • bridle_area::Any: total actual bridle area [m²] Default: zero(S)

      • c_spring::Any: spring constant, depending on the length of the tether segment Default: zero(S)

      • segment_length::Any: unstressed segment length [m] Default: 0.0

      • damping::Any: damping factor, depending on the length of the tether segment Default: zero(S)

      • last_v_app_norm_tether::Any: last norm of the apparent wind speed at a tether segment [m/s] Default: zero(S)

      • param_cl::Any: lift coefficient of the kite, depending on the angle of attack Default: 0.2

      • param_cd::Any: drag coefficient of the kite, depending on the angle of attack Default: 1.0

      • cor_steering::Any: correction term for the steering, in paper named i_(s,c), Eq. 30 Default: zero(S)

      • psi::Any: azimuth angle in radian; inital value is zero Default: zero(S)

      • beta::Any: elevation angle in radian; initial value about 70 degrees Default: deg2rad((se()).elevation)

      • alpha_depower::Any: depower angle [deg] Default: 0.0

      • t_0::Any: relative start time of the current time interval Default: 0.0

      • v_reel_out::Any: reel out speed of the winch [m/s] Default: 0.0

      • last_v_reel_out::Any: reel out speed during the last time step Default: 0.0

      • l_tether::Any: unstretched tether length Default: 0.0

      • rho::Any: air density at the height of the kite Default: 0.0

      • depower::Any: actual relative depower setting, must be between 0 .. 1.0 Default: 0.0

      • steering::Any: actual relative steering setting, must be between -1.0 .. 1.0 Default: 0.0

      • stiffness_factor::Any: factor for the tether stiffness, used to find the steady state with a low stiffness first Default: 1.0

      • initial_masses::StaticArraysCore.MVector{P, S} where {S, P}: initial masses of the point masses Default: ones(P)

      • masses::StaticArraysCore.MVector{P, S} where {S, P}: current masses, depending on the total tether length Default: ones(P)

      • forces::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: vector of the forces, acting on the particles Default: zeros(SVector{P, KVec3})

      • sync_speed::Union{Nothing, S} where S: synchronous speed of the motor/ generator Default: 0.0

      • set_torque::Union{Nothing, S} where S: set_torque of the motor/generator Default: nothing

      source
      KiteModels.KPS4 — Type
      mutable struct KPS4{S, T, P, Q, SP} <: AbstractKiteModel

      State of the kite power system, using a 4 point kite model. Parameters:

      • S: Scalar type, e.g. SimFloat In the documentation mentioned as Any, but when used in this module it is always SimFloat and not Any.
      • T: Vector type, e.g. MVector{3, SimFloat}
      • P: number of points of the system, segments+1
      • Q: number of springs in the system, P-1
      • SP: struct type, describing a spring

      Normally a user of this package will not have to access any of the members of this type directly, use the input and output functions instead.

      • set::Settings: Reference to the settings struct

      • kcu::KCU: Reference to the KCU model (Kite Control Unit as implemented in the package KitePodModels

      • am::AtmosphericModel: Reference to the atmospheric model as implemented in the package AtmosphericModels Default: AtmosphericModel()

      • wm::AbstractWinchModel: Reference to winch model as implemented in the package WinchModels

      • iter::Int64: Iterations, number of calls to the function residual! Default: 0

      • calc_cl::Dierckx.Spline1D: Function for calculation the lift coefficent, using a spline based on the provided value pairs.

      • calc_cd::Dierckx.Spline1D: Function for calculation the drag coefficent, using a spline based on the provided value pairs.

      • v_wind::Any: wind vector at the height of the kite Default: zeros(S, 3)

      • v_wind_gnd::Any: wind vector at reference height Default: zeros(S, 3)

      • v_wind_tether::Any: wind vector used for the calculation of the tether drag Default: zeros(S, 3)

      • v_apparent::Any: apparent wind vector at the kite Default: zeros(S, 3)

      • bridle_factor::Any: bridlefactor = set.lbridle/bridle_length(set) Default: 1.0

      • side_cl::Any: side lift coefficient, the difference of the left and right lift coeficients Default: 0.0

      • drag_force::Any: drag force of kite and bridle; output of calcaeroforces! Default: zeros(S, 3)

      • side_force::Any: side_force acting on the kite Default: zeros(S, 3)

      • ks::Any: max_steering angle in radian Default: 0.0

      • lift_force::Any: lift force of the kite; output of calcaeroforces! Default: zeros(S, 3)

      • spring_force::Any: spring force of the current tether segment, output of calcparticleforces! Default: zeros(S, 3)

      • last_force::Any: last winch force Default: zeros(S, 3)

      • res1::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: a copy of the residual one (pos,vel) for debugging and unit tests Default: zeros(SVector{P, KVec3})

      • res2::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: a copy of the residual two (vel,acc) for debugging and unit tests Default: zeros(SVector{P, KVec3})

      • pos::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: a copy of the actual positions as output for the user Default: zeros(SVector{P, KVec3})

      • vel_kite::Any: velocity vector of the kite Default: zeros(S, 3)

      • segment_length::Any: unstressed segment length [m] Default: 0.0

      • param_cl::Any: lift coefficient of the kite, depending on the angle of attack Default: 0.2

      • param_cd::Any: drag coefficient of the kite, depending on the angle of attack Default: 1.0

      • psi::Any: azimuth angle in radian; inital value is zero Default: zero(S)

      • alpha_depower::Any: depower angle [deg] Default: 0.0

      • alpha_2::Any: aoa at paricle B Default: 0.0

      • alpha_2b::Any: aoa at paricle B, corrected formula Default: 0.0

      • alpha_3::Any: aoa at paricle C Default: 0.0

      • alpha_3b::Any: Default: 0.0

      • alpha_4::Any: aoa at paricle D Default: 0.0

      • alpha_4b::Any: Default: 0.0

      • t_0::Any: relative start time of the current time interval Default: 0.0

      • v_reel_out::Any: reel out speed of the winch Default: 0.0

      • last_v_reel_out::Any: reel out speed at the last time step Default: 0.0

      • l_tether::Any: unstretched tether length Default: 0.0

      • rho::Any: air density at the height of the kite Default: 0.0

      • depower::Any: actual relative depower setting, must be between 0 .. 1.0 Default: 0.0

      • steering::Any: actual relative steering setting, must be between -1.0 .. 1.0 Default: 0.0

      • stiffness_factor::Any: multiplier for the stiffniss of tether and bridle Default: 1.0

      • initial_masses::StaticArraysCore.MVector{P, S} where {S, P}: initial masses of the point masses Default: ones(P)

      • masses::StaticArraysCore.MVector{P, S} where {S, P}: current masses, depending on the total tether length Default: zeros(P)

      • springs::StaticArraysCore.MVector: vector of the springs, defined as struct Default: zeros(SP, Q)

      • forces::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: vector of the forces, acting on the particles Default: zeros(SVector{P, KVec3})

      • sync_speed::Union{Nothing, S} where S: synchronous speed of the motor/ generator Default: 0.0

      • set_torque::Union{Nothing, S} where S: set_torque of the motor/generator Default: nothing

      • x::Any: x vector of kite reference frame Default: zeros(S, 3)

      • y::Any: y vector of kite reference frame Default: zeros(S, 3)

      • z::Any: z vector of kite reference frame Default: zeros(S, 3)

      source
      KiteModels.KPS4_3L — Type
      mutable struct KPS4_3L{S, T, P, Q, SP} <: AbstractKiteModel

      State of the kite power system, using a 3 point kite model and three steering lines to the ground. Parameters:

      • S: Scalar type, e.g. SimFloat In the documentation mentioned as Any, but when used in this module it is always SimFloat and not Any.
      • T: Vector type, e.g. KVec3
      • P: number of points of the system, segments+3
      • Q: number of springs in the system, P-1
      • SP: struct type, describing a spring

      Normally a user of this package will not have to access any of the members of this type directly, use the input and output functions instead.

      • set::Settings: Reference to the settings struct

      • set_hash::UInt64: Reference to the settings hash Default: 0

      • last_init_elevation::Any: The last initial elevation Default: 0.0

      • last_init_tether_length::Any: The last initial tether length Default: 0.0

      • last_set_hash::UInt64: Reference to the last settings hash Default: 0

      • am::AtmosphericModel: Reference to the atmospheric model as implemented in the package AtmosphericModels Default: AtmosphericModel()

      • cl_interp::Function: Function for calculating the lift coefficent, using linear interpolation based on the provided value pairs.

      • cd_interp::Function: Function for calculating the drag coefficent, using linear interpolation based on the provided value pairs.

      • c_te_interp::Function: Function for calculating the trailing edge force coefficient, using linear interpolation based on the provided value pairs.

      • motors::StaticArraysCore.SizedArray{Tuple{3}, AbstractWinchModel, N, M, TData} where {N, M, TData<:AbstractArray{AbstractWinchModel, M}}: Reference to the motor models as implemented in the package WinchModels. index 1: middle motor, index 2: left motor, index 3: right motor

      • iter::Int64: Iterations, number of calls to the function residual! Default: 0

      • v_wind::Any: wind vector at the height of the kite Default: zeros(S, 3)

      • v_wind_gnd::Any: wind vector at reference height Default: zeros(S, 3)

      • v_wind_tether::Any: wind vector used for the calculation of the tether drag Default: zeros(S, 3)

      • v_apparent::Any: apparent wind vector at the kite Default: zeros(S, 3)

      • winch_forces::StaticArraysCore.SVector{3}: last winch force Default: [zeros(S, 3) for _ = 1:3]

      • res1::StaticArraysCore.SVector{P, T} where {T, P}: a copy of the residual one (pos,vel) for debugging and unit tests Default: zeros(SVector{P, T})

      • res2::StaticArraysCore.SVector{P, T} where {T, P}: a copy of the residual two (vel,acc) for debugging and unit tests Default: zeros(SVector{P, T})

      • pos::StaticArraysCore.SVector{P, T} where {T, P}: a copy of the actual positions as output for the user Default: zeros(SVector{P, T})

      • vel::StaticArraysCore.SVector{P, T} where {T, P}: Default: zeros(SVector{P, T})

      • veld::StaticArraysCore.SVector{P, T} where {T, P}: Default: zeros(SVector{P, T})

      • flap_acc::StaticArraysCore.MVector{2}: Default: zeros(MVector{2, S})

      • vel_kite::Any: velocity vector of the kite Default: zeros(S, 3)

      • segment_lengths::Any: unstressed segment lengths of the three tethers [m] Default: zeros(S, 3)

      • psi::Any: azimuth angle in radian; inital value is zero Default: zero(S)

      • t_0::Any: relative start time of the current time interval Default: 0.0

      • reel_out_speeds::Any: reel out speed of the winch Default: zeros(S, 3)

      • tether_lengths::Any: unstretched tether length Default: zeros(S, 3)

      • flap_angle::StaticArraysCore.MVector{2}: lengths of the connections of the steering tethers to the kite Default: zeros(S, 2)

      • rho::Any: air density at the height of the kite Default: 0.0

      • damping_coeff::Any: multiplier for the damping of all movement Default: 0.0

      • masses::StaticArraysCore.MVector{P, S} where {S, P}: current masses, depending on the total tether length Default: zeros(P)

      • springs::StaticArraysCore.MVector: vector of the springs, defined as struct Default: zeros(SP, Q)

      • c_spring::Any: unit spring coefficient Default: zero(S)

      • damping::Any: unit damping coefficient Default: zero(S)

      • forces::StaticArraysCore.SVector{P, T} where {T, P}: vector of the forces, acting on the particles Default: zeros(SVector{P, T})

      • set_values::StaticArraysCore.MVector{3, Float64}: synchronous speed or torque of the motor/ generator Default: zeros(KVec3)

      • torque_control::Bool: whether or not to use torque control instead of speed control Default: false

      • e_x::Any: x vector of kite reference frame Default: zeros(S, 3)

      • e_y::Any: y vector of kite reference frame Default: zeros(S, 3)

      • e_z::Any: z vector of kite reference frame Default: zeros(S, 3)

      • num_flap_C::Int64: Point number of C flap connection point Default: 0

      • num_flap_D::Int64: Point number of D flap connection point Default: 0

      • num_E::Int64: Point number of E Default: 0

      • num_C::Int64: Point number of C Default: 0

      • num_D::Int64: Point number of D Default: 0

      • num_A::Int64: Point number of A Default: 0

      • α_l::Any: Angle of left tip Default: 0.0

      • α_r::Any: Angle of right tip Default: 0.0

      • α_C::Any: Angle of point C Default: 0.0

      • kite_length_C::Any: Kite length at point C Default: 0.0

      • L_C::Any: Lift of point C Default: zeros(S, 3)

      • L_D::Any: Lift of point D Default: zeros(S, 3)

      • D_C::Any: Drag of point C Default: zeros(S, 3)

      • D_D::Any: Drag of point D Default: zeros(S, 3)

      • steady_sol::Union{Nothing, SciMLBase.NonlinearSolution}: Solution of the steady state problem Default: nothing

      • simple_sys::Union{Nothing, ModelingToolkit.ODESystem}: Simplified system of the mtk model Default: nothing

      • v_wind_gnd_idx::Union{Nothing, ModelingToolkit.ParameterIndex}: Default: nothing

      • v_wind_idx::Union{Nothing, ModelingToolkit.ParameterIndex}: Default: nothing

      • prob::Union{Nothing, SciMLBase.ODEProblem}: Default: nothing

      • set_set_values::Union{Nothing, SymbolicIndexingInterface.MultipleSetters}: Default: nothing

      • get_pos::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_flap_angle::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_flap_acc::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_kite_vel::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_winch_forces::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_tether_lengths::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_tether_vels::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_L_C::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_L_D::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_D_C::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_D_D::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • integrator::Union{Nothing, OrdinaryDiffEqCore.ODEIntegrator, Sundials.CVODEIntegrator}: Default: nothing

      • u0::Vector{Float64}: Default: [0.0]

      source

      These structs store the state of the one point model and four point model. Only in unit tests it is allowed to access the members directly, otherwise use the input and output functions. The model KPS4_3L is not yet implemented, it is just a copy of KPS4.

      +Types · KiteModels.jl
      Edit on GitHub

      Exported Types

      Basic types

      KiteModels.SimFloat — Type
      const SimFloat = Float64

      This type is used for all real variables, used in the Simulation. Possible alternatives: Float32, Double64, Dual Other types than Float64 or Float32 do require support of Julia types by the solver.

      source
      KiteModels.KVec3 — Type

      const KVec3 = MVector{3, SimFloat}

      Basic 3-dimensional vector, stack allocated, mutable.

      source
      KiteModels.SVec3 — Type

      const SVec3 = SVector{3, SimFloat}

      Basic 3-dimensional vector, stack allocated, immutable.

      source
      KiteModels.AbstractKiteModel — Type
      abstract type AbstractKiteModel

      All kite models must inherit from this type. All methods that are defined on this type must work with all kite models. All exported methods must work on this type.

      source

      Struct KPS3 and KPS4 and KPS4_3L

      KiteModels.KPS3 — Type
      mutable struct KPS3{S, T, P} <: AbstractKiteModel

      State of the kite power system. Parameters:

      • S: Scalar type, e.g. SimFloat In the documentation mentioned as Any, but when used in this module it is always SimFloat and not Any.
      • T: Vector type, e.g. MVector{3, SimFloat}
      • P: number of points of the system, segments+1

      Normally a user of this package will not have to access any of the members of this type directly, use the input and output functions instead.

      • set::Settings: Reference to the settings struct

      • kcu::KCU: Reference to the KCU model (Kite Control Unit as implemented in the package KitePodModels

      • am::AtmosphericModel: Reference to the atmospheric model as implemented in the package AtmosphericModels Default: AtmosphericModel()

      • wm::Union{Nothing, AbstractWinchModel}: Reference to winch model as implemented in the package WinchModels Default: nothing

      • iter::Int64: Iterations, number of calls to the function residual! Default: 0

      • calc_cl::Dierckx.Spline1D: Function for calculation the lift coefficent, using a spline based on the provided value pairs.

      • calc_cd::Dierckx.Spline1D: Function for calculation the drag coefficent, using a spline based on the provided value pairs.

      • v_wind::Any: wind vector at the height of the kite Default: zeros(S, 3)

      • v_wind_gnd::Any: wind vector at reference height Default: zeros(S, 3)

      • v_wind_tether::Any: wind vector used for the calculation of the tether drag Default: zeros(S, 3)

      • v_apparent::Any: apparent wind vector at the kite Default: zeros(S, 3)

      • v_app_perp::Any: vector, perpendicular to vapparent; output of calcdrag Default: zeros(S, 3)

      • drag_force::Any: drag force of kite and bridle; output of calcaeroforces Default: zeros(S, 3)

      • lift_force::Any: lift force of the kite; output of calcaeroforces Default: zeros(S, 3)

      • steering_force::Any: steering force acting on the kite; output of calcaeroforces Default: zeros(S, 3)

      • last_force::Any: Default: zeros(S, 3)

      • spring_force::Any: spring force of the current tether segment, output of calc_res Default: zeros(S, 3)

      • total_forces::Any: Default: zeros(S, 3)

      • force::Any: sum of spring and drag forces acting on the current segment, output of calc_res Default: zeros(S, 3)

      • unit_vector::Any: unit vector in the direction of the current tether segment, output of calc_res Default: zeros(S, 3)

      • av_vel::Any: average velocity of the current tether segment, output of calc_res Default: zeros(S, 3)

      • kite_y::Any: y-vector of the kite fixed referense frame, output of calcaeroforces Default: zeros(S, 3)

      • segment::Any: vector representing one tether segment (p1-p2) Default: zeros(S, 3)

      • last_tether_drag::Any: vector of the drag force of the last calculated tether segment Default: zeros(S, 3)

      • vec_z::Any: z vector of the kite reference frame Default: zeros(S, 3)

      • res1::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: part one of the residual, difference between pos' and vel, non-flat, mainly for unit testing Default: zeros(SVector{P, KVec3})

      • res2::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: part two of the residual, difference between vel' and acc, non-flat, mainly for unit testing Default: zeros(SVector{P, KVec3})

      • pos::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: vector of the positions of the particles Default: zeros(SVector{P, KVec3})

      • vel_kite::Any: velocity vector of the kite Default: zeros(S, 3)

      • seg_area::Any: area of one tether segment [m²] Default: zero(S)

      • bridle_area::Any: total actual bridle area [m²] Default: zero(S)

      • c_spring::Any: spring constant, depending on the length of the tether segment Default: zero(S)

      • segment_length::Any: unstressed segment length [m] Default: 0.0

      • damping::Any: damping factor, depending on the length of the tether segment Default: zero(S)

      • last_v_app_norm_tether::Any: last norm of the apparent wind speed at a tether segment [m/s] Default: zero(S)

      • param_cl::Any: lift coefficient of the kite, depending on the angle of attack Default: 0.2

      • param_cd::Any: drag coefficient of the kite, depending on the angle of attack Default: 1.0

      • cor_steering::Any: correction term for the steering, in paper named i_(s,c), Eq. 30 Default: zero(S)

      • psi::Any: azimuth angle in radian; inital value is zero Default: zero(S)

      • beta::Any: elevation angle in radian; initial value about 70 degrees Default: deg2rad((se()).elevation)

      • alpha_depower::Any: depower angle [deg] Default: 0.0

      • t_0::Any: relative start time of the current time interval Default: 0.0

      • v_reel_out::Any: reel out speed of the winch [m/s] Default: 0.0

      • last_v_reel_out::Any: reel out speed during the last time step Default: 0.0

      • l_tether::Any: unstretched tether length Default: 0.0

      • rho::Any: air density at the height of the kite Default: 0.0

      • depower::Any: actual relative depower setting, must be between 0 .. 1.0 Default: 0.0

      • steering::Any: actual relative steering setting, must be between -1.0 .. 1.0 Default: 0.0

      • stiffness_factor::Any: factor for the tether stiffness, used to find the steady state with a low stiffness first Default: 1.0

      • initial_masses::StaticArraysCore.MVector{P, S} where {S, P}: initial masses of the point masses Default: ones(P)

      • masses::StaticArraysCore.MVector{P, S} where {S, P}: current masses, depending on the total tether length Default: ones(P)

      • forces::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: vector of the forces, acting on the particles Default: zeros(SVector{P, KVec3})

      • sync_speed::Union{Nothing, S} where S: synchronous speed of the motor/ generator Default: 0.0

      • set_torque::Union{Nothing, S} where S: set_torque of the motor/generator Default: nothing

      source
      KiteModels.KPS4 — Type
      mutable struct KPS4{S, T, P, Q, SP} <: AbstractKiteModel

      State of the kite power system, using a 4 point kite model. Parameters:

      • S: Scalar type, e.g. SimFloat In the documentation mentioned as Any, but when used in this module it is always SimFloat and not Any.
      • T: Vector type, e.g. MVector{3, SimFloat}
      • P: number of points of the system, segments+1
      • Q: number of springs in the system, P-1
      • SP: struct type, describing a spring

      Normally a user of this package will not have to access any of the members of this type directly, use the input and output functions instead.

      • set::Settings: Reference to the settings struct

      • kcu::KCU: Reference to the KCU model (Kite Control Unit as implemented in the package KitePodModels

      • am::AtmosphericModel: Reference to the atmospheric model as implemented in the package AtmosphericModels Default: AtmosphericModel()

      • wm::AbstractWinchModel: Reference to winch model as implemented in the package WinchModels

      • iter::Int64: Iterations, number of calls to the function residual! Default: 0

      • calc_cl::Dierckx.Spline1D: Function for calculation the lift coefficent, using a spline based on the provided value pairs.

      • calc_cd::Dierckx.Spline1D: Function for calculation the drag coefficent, using a spline based on the provided value pairs.

      • v_wind::Any: wind vector at the height of the kite Default: zeros(S, 3)

      • v_wind_gnd::Any: wind vector at reference height Default: zeros(S, 3)

      • v_wind_tether::Any: wind vector used for the calculation of the tether drag Default: zeros(S, 3)

      • v_apparent::Any: apparent wind vector at the kite Default: zeros(S, 3)

      • bridle_factor::Any: bridlefactor = set.lbridle/bridle_length(set) Default: 1.0

      • side_cl::Any: side lift coefficient, the difference of the left and right lift coeficients Default: 0.0

      • drag_force::Any: drag force of kite and bridle; output of calcaeroforces! Default: zeros(S, 3)

      • side_force::Any: side_force acting on the kite Default: zeros(S, 3)

      • ks::Any: max_steering angle in radian Default: 0.0

      • lift_force::Any: lift force of the kite; output of calcaeroforces! Default: zeros(S, 3)

      • spring_force::Any: spring force of the current tether segment, output of calcparticleforces! Default: zeros(S, 3)

      • last_force::Any: last winch force Default: zeros(S, 3)

      • res1::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: a copy of the residual one (pos,vel) for debugging and unit tests Default: zeros(SVector{P, KVec3})

      • res2::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: a copy of the residual two (vel,acc) for debugging and unit tests Default: zeros(SVector{P, KVec3})

      • pos::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: a copy of the actual positions as output for the user Default: zeros(SVector{P, KVec3})

      • vel_kite::Any: velocity vector of the kite Default: zeros(S, 3)

      • segment_length::Any: unstressed segment length [m] Default: 0.0

      • param_cl::Any: lift coefficient of the kite, depending on the angle of attack Default: 0.2

      • param_cd::Any: drag coefficient of the kite, depending on the angle of attack Default: 1.0

      • psi::Any: azimuth angle in radian; inital value is zero Default: zero(S)

      • alpha_depower::Any: depower angle [deg] Default: 0.0

      • alpha_2::Any: aoa at paricle B Default: 0.0

      • alpha_2b::Any: aoa at paricle B, corrected formula Default: 0.0

      • alpha_3::Any: aoa at paricle C Default: 0.0

      • alpha_3b::Any: Default: 0.0

      • alpha_4::Any: aoa at paricle D Default: 0.0

      • alpha_4b::Any: Default: 0.0

      • t_0::Any: relative start time of the current time interval Default: 0.0

      • v_reel_out::Any: reel out speed of the winch Default: 0.0

      • last_v_reel_out::Any: reel out speed at the last time step Default: 0.0

      • l_tether::Any: unstretched tether length Default: 0.0

      • rho::Any: air density at the height of the kite Default: 0.0

      • depower::Any: actual relative depower setting, must be between 0 .. 1.0 Default: 0.0

      • steering::Any: actual relative steering setting, must be between -1.0 .. 1.0 Default: 0.0

      • stiffness_factor::Any: multiplier for the stiffniss of tether and bridle Default: 1.0

      • initial_masses::StaticArraysCore.MVector{P, S} where {S, P}: initial masses of the point masses Default: ones(P)

      • masses::StaticArraysCore.MVector{P, S} where {S, P}: current masses, depending on the total tether length Default: zeros(P)

      • springs::StaticArraysCore.MVector: vector of the springs, defined as struct Default: zeros(SP, Q)

      • forces::StaticArraysCore.SVector{P, StaticArraysCore.MVector{3, Float64}} where P: vector of the forces, acting on the particles Default: zeros(SVector{P, KVec3})

      • sync_speed::Union{Nothing, S} where S: synchronous speed of the motor/ generator Default: 0.0

      • set_torque::Union{Nothing, S} where S: set_torque of the motor/generator Default: nothing

      • x::Any: x vector of kite reference frame Default: zeros(S, 3)

      • y::Any: y vector of kite reference frame Default: zeros(S, 3)

      • z::Any: z vector of kite reference frame Default: zeros(S, 3)

      source
      KiteModels.KPS4_3L — Type
      mutable struct KPS4_3L{S, T, P, Q, SP} <: AbstractKiteModel

      State of the kite power system, using a 3 point kite model and three steering lines to the ground. Parameters:

      • S: Scalar type, e.g. SimFloat In the documentation mentioned as Any, but when used in this module it is always SimFloat and not Any.
      • T: Vector type, e.g. KVec3
      • P: number of points of the system, segments+3
      • Q: number of springs in the system, P-1
      • SP: struct type, describing a spring

      Normally a user of this package will not have to access any of the members of this type directly, use the input and output functions instead.

      • set::Settings: Reference to the settings struct

      • set_hash::UInt64: Reference to the settings hash Default: 0

      • last_init_elevation::Any: The last initial elevation Default: 0.0

      • last_init_tether_length::Any: The last initial tether length Default: 0.0

      • last_set_hash::UInt64: Reference to the last settings hash Default: 0

      • am::AtmosphericModel: Reference to the atmospheric model as implemented in the package AtmosphericModels Default: AtmosphericModel()

      • cl_interp::Function: Function for calculating the lift coefficent, using linear interpolation based on the provided value pairs.

      • cd_interp::Function: Function for calculating the drag coefficent, using linear interpolation based on the provided value pairs.

      • c_te_interp::Function: Function for calculating the trailing edge force coefficient, using linear interpolation based on the provided value pairs.

      • motors::StaticArraysCore.SizedArray{Tuple{3}, AbstractWinchModel, N, M, TData} where {N, M, TData<:AbstractArray{AbstractWinchModel, M}}: Reference to the motor models as implemented in the package WinchModels. index 1: middle motor, index 2: left motor, index 3: right motor

      • iter::Int64: Iterations, number of calls to the function residual! Default: 0

      • v_wind::Any: wind vector at the height of the kite Default: zeros(S, 3)

      • v_wind_gnd::Any: wind vector at reference height Default: zeros(S, 3)

      • v_wind_tether::Any: wind vector used for the calculation of the tether drag Default: zeros(S, 3)

      • v_apparent::Any: apparent wind vector at the kite Default: zeros(S, 3)

      • winch_forces::StaticArraysCore.SVector{3}: last winch force Default: [zeros(S, 3) for _ = 1:3]

      • res1::StaticArraysCore.SVector{P, T} where {T, P}: a copy of the residual one (pos,vel) for debugging and unit tests Default: zeros(SVector{P, T})

      • res2::StaticArraysCore.SVector{P, T} where {T, P}: a copy of the residual two (vel,acc) for debugging and unit tests Default: zeros(SVector{P, T})

      • pos::StaticArraysCore.SVector{P, T} where {T, P}: a copy of the actual positions as output for the user Default: zeros(SVector{P, T})

      • vel::StaticArraysCore.SVector{P, T} where {T, P}: Default: zeros(SVector{P, T})

      • veld::StaticArraysCore.SVector{P, T} where {T, P}: Default: zeros(SVector{P, T})

      • flap_acc::StaticArraysCore.MVector{2}: Default: zeros(MVector{2, S})

      • vel_kite::Any: velocity vector of the kite Default: zeros(S, 3)

      • segment_lengths::Any: unstressed segment lengths of the three tethers [m] Default: zeros(S, 3)

      • psi::Any: azimuth angle in radian; inital value is zero Default: zero(S)

      • t_0::Any: relative start time of the current time interval Default: 0.0

      • reel_out_speeds::Any: reel out speed of the winch Default: zeros(S, 3)

      • tether_lengths::Any: unstretched tether length Default: zeros(S, 3)

      • flap_angle::StaticArraysCore.MVector{2}: lengths of the connections of the steering tethers to the kite Default: zeros(S, 2)

      • rho::Any: air density at the height of the kite Default: 0.0

      • damping_coeff::Any: multiplier for the damping of all movement Default: 0.0

      • masses::StaticArraysCore.MVector{P, S} where {S, P}: current masses, depending on the total tether length Default: zeros(P)

      • springs::StaticArraysCore.MVector: vector of the springs, defined as struct Default: zeros(SP, Q)

      • c_spring::Any: unit spring coefficient Default: zero(S)

      • damping::Any: unit damping coefficient Default: zero(S)

      • forces::StaticArraysCore.SVector{P, T} where {T, P}: vector of the forces, acting on the particles Default: zeros(SVector{P, T})

      • set_values::StaticArraysCore.MVector{3, Float64}: synchronous speed or torque of the motor/ generator Default: zeros(KVec3)

      • torque_control::Bool: whether or not to use torque control instead of speed control Default: false

      • e_x::Any: x vector of kite reference frame Default: zeros(S, 3)

      • e_y::Any: y vector of kite reference frame Default: zeros(S, 3)

      • e_z::Any: z vector of kite reference frame Default: zeros(S, 3)

      • num_flap_C::Int64: Point number of C flap connection point Default: 0

      • num_flap_D::Int64: Point number of D flap connection point Default: 0

      • num_E::Int64: Point number of E Default: 0

      • num_C::Int64: Point number of C Default: 0

      • num_D::Int64: Point number of D Default: 0

      • num_A::Int64: Point number of A Default: 0

      • α_l::Any: Angle of left tip Default: 0.0

      • α_r::Any: Angle of right tip Default: 0.0

      • α_C::Any: Angle of point C Default: 0.0

      • kite_length_C::Any: Kite length at point C Default: 0.0

      • L_C::Any: Lift of point C Default: zeros(S, 3)

      • L_D::Any: Lift of point D Default: zeros(S, 3)

      • D_C::Any: Drag of point C Default: zeros(S, 3)

      • D_D::Any: Drag of point D Default: zeros(S, 3)

      • steady_sol::Union{Nothing, SciMLBase.NonlinearSolution}: Solution of the steady state problem Default: nothing

      • simple_sys::Union{Nothing, ModelingToolkit.ODESystem}: Simplified system of the mtk model Default: nothing

      • v_wind_gnd_idx::Union{Nothing, ModelingToolkit.ParameterIndex}: Default: nothing

      • v_wind_idx::Union{Nothing, ModelingToolkit.ParameterIndex}: Default: nothing

      • prob::Union{Nothing, SciMLBase.ODEProblem}: Default: nothing

      • set_set_values::Union{Nothing, SymbolicIndexingInterface.MultipleSetters}: Default: nothing

      • get_pos::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_flap_angle::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_flap_acc::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_kite_vel::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_winch_forces::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_tether_lengths::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_tether_vels::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_L_C::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_L_D::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_D_C::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • get_D_D::Union{Nothing, SymbolicIndexingInterface.MultipleGetters, SymbolicIndexingInterface.TimeDependentObservedFunction}: Default: nothing

      • integrator::Union{Nothing, OrdinaryDiffEqCore.ODEIntegrator, Sundials.CVODEIntegrator}: Default: nothing

      • u0::Vector{Float64}: Default: [0.0]

      source

      These structs store the state of the one point model and four point model. Only in unit tests it is allowed to access the members directly, otherwise use the input and output functions. The model KPS4_3L is not yet implemented, it is just a copy of KPS4.