Register package

[ufechner7]

@JuliaRegistrator register

[ufechner7]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/51591

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.0 -m "<description of version>" 309e15d0eef35c793e6fe737c6e753072838e17b
git push origin v0.1.0

[ufechner7]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/51591

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.1.0 -m "<description of version>" 37ee55280b24ed18cc34a8cc304b54653dbdfee4
git push origin v0.1.0

[ufechner7]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/56517

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.2.0 -m "<description of version>" 722a791c35205619b2cb574c1d60ca187a677678
git push origin v0.2.0

[ufechner7]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/58644

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.0 -m "<description of version>" e5420062c70da5c8d8e6c181bf12aa80f476ddcf
git push origin v0.3.0

[ufechner7]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/58644

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.0 -m "<description of version>" 33144e8ff20458071f99e5271a6da3e487e22631
git push origin v0.3.0

[ufechner7]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/58689

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.1 -m "<description of version>" b1e80d381ca80588bc26e62050bdccf137593659
git push origin v0.3.1

[ufechner7]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/58810

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.2 -m "<description of version>" 497b65525611fe36fe0943640aee13b4af243729
git push origin v0.3.2

[ufechner7]

@JuliaRegistrator register

[JuliaRegistrator]

Error while trying to register: "Tag with name v0.3.2 already exists and points to a different commit"

[ufechner7]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/59541

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.3 -m "<description of version>" bdabea2585986fad68b06252fff79edf4c003643
git push origin v0.3.3

[ufechner7]

@JuliaRegistrator register

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/59913

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.3.4 -m "<description of version>" 3f2f0dee37c7fd911720d2d16480199de71a439f
git push origin v0.3.4

[ufechner7]

@JuliaRegistrator register

[JuliaRegistrator]

Error while trying to register: "Tag with name v0.3.4 already exists and points to a different commit"

[ufechner7]

@JuliaRegistrator register

[ufechner7]

@JuliaRegistrator register

Release notes:

Added

• a new kite model, KPS3_3L was contributed by Bart van de Lint. It uses three lines to the ground and three winches for steering a ram-air foil kite.
• caching for the initial equilibrium
• function KiteModels.install_examples() that copies the examples, the data folder and installs the required extra packages
• log alpha2, alpha3, alpha4; they must never become negative

Fixed

• the calculation of the call-backs per time step was fixed in all examples and the tests

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/112981

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.4 -m "<description of version>" 14eab79985a446949395753ea7256e3f663de6c5
git push origin v0.6.4

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/112981

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.4 -m "<description of version>" b613e79954658ea29cc896053bcdf0b211615413
git push origin v0.6.4

[ufechner7]

@JuliaRegistrator register

Release notes:

Changed

• bump KiteUtils to 0.7.7
• add new examples to menu
• major change to the function that finds the initial equilibrium; the function init_sim! has the new
  parameter delta which should be in the range of 0.01 to 0.03.
• better error message if init_sim!, but no exception any more. I just returns nothing.
• remove dependency StatProfilerHTML

Added

• add KCU drag, based on kcu_diameter and cd_kcu
• add function bridle_length (not exported)
• unit tests for the KPS3_3L model, based on ModelingToolkit
• script examples/plot_cl_cd.jl
• script examples/plot_cl_cd_plate.jl
• script torque_controlled_mtk.jl

Fixed

• correct tether drag based on l_bridle; if the kite has more than 7 bridle lines l_bridle must be larger than bridle_length(se)

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/113710

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.5 -m "<description of version>" f080e9ef33f3b7060ec2ed4222c3e1e552f658f5
git push origin v0.6.5

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/113710

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.5 -m "<description of version>" 3711b8701d2602d56cc8047fc6b5d8897aabfe9d
git push origin v0.6.5

[ufechner7]

@JuliaRegistrator register

Release notes:

Changed

• the method next_step! uses now upwind_dir as parameter and not longer wind_dir
• install matplotlib if it is not already installed after user confirmation in a Julia specific environment
• replaced OrdinaryDiffEq with the three packages OrdinaryDiffEqCore, OrdinaryDiffEqBDF
  and OrdinaryDiffEqSDIRK. This should help to reduce the pre-compilation time.
• set the parameter delta in the examples
• always specify the system.yaml file to use in the examples, always use load_settings instead of se.
  This ensures that the settings are always freshly loaded from the file when the script is launched, so any changes
  to the settings become immediately effective.
• the KPS4_3L model was replaced by the pure ModelingToolkit (MTK) based version. This allows not only a much faster simulation, but the results are also much more accurate.

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/114422

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.6 -m "<description of version>" cb2a50984fa6effb478592d6fc75fc09bb1e31f5
git push origin v0.6.6

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/114422

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.6 -m "<description of version>" cb2a50984fa6effb478592d6fc75fc09bb1e31f5
git push origin v0.6.6

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/114422

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.6 -m "<description of version>" cb2a50984fa6effb478592d6fc75fc09bb1e31f5
git push origin v0.6.6

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/114422

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.6 -m "<description of version>" 122f8ecb60c631e0b347ff5bf8897f4350182376
git push origin v0.6.6

[ufechner7]

@JuliaRegistrator register

Release notes:

Changed

• renamed test_init.jl to test_init_4p.jl
• by default, azimuth in wind reference frame is now used
• the orientation is now represented in NED reference frame
• the method calc_heading has two new, optional parameters: neg_azimuth=false, one_point=false
• the definition of heading and azimuth has changed, which will require adaptions in the controller

Added

• example plot_side_cl.jl
• example plot_cl_cd_plate.jl
• example steering_test.jl
• example test_init_1p.jl
• the test script test_orientation.jl was contributed by Daan van Wolffelaar; currently, some of these tests are still broken (error of about 2%)
• XFoil for calculating the polars

Fixed

• many of the examples; all examples of menu.jl now work

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/117697

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.7 -m "<description of version>" 50daf46f736301ab9a540b8ca4d3a619936aa1cc
git push origin v0.6.7

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/117697

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.7 -m "<description of version>" c9a6eca12ee3097e24630674f05f2589fad28eb7
git push origin v0.6.7

[ufechner7]

@JuliaRegistrator register

Release notes:

Changed

• the sign of the steering signal was changed. Now, a positive steering signal causes a positive turn rate.
  The turn rate is the derivative of the heading angle.
• all orientation tests pass now (calculation of roll, pitch, yaw, azimuth_north, elevation, heading)
• add example steering_test_1p.jl
• improve steering_test_4p.jl, use fully powered kite now
• the logged steering signal is now divided by set.cs_4p, because the new version of KitePodModels.jl multiplies the steering value with this constant
• update documentation regarding steering and heading

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/117931

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.8 -m "<description of version>" 698c9336b05bd73967c99d6175c56c4b3740eb4a
git push origin v0.6.8

[ufechner7]

@JuliaRegistrator register

Release notes:

• added tests for calc_azimuth(s::AKM), the azimuth in wind reference frame
• re-enable logging of the angles of attack of the three plates
• steering_test_4p.jl now calculates both c1 and c2 of the turn-rate law
• the environment variable NO_MTK disables the pre-compilation of the KPS4_3L model
  to save time during development
• the script menu2.jl for model verification was added

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/118492

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.9 -m "<description of version>" 1d9af2e9b6baf5a046020e79a6bfa5c18f03a23c
git push origin v0.6.9

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/118492

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.9 -m "<description of version>" 58bfdb2f4d37c02660ca5c6d296edd2f645938b3
git push origin v0.6.9

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/118492

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.9 -m "<description of version>" e92aecb002b2c9d602c494f279c01f4f53a0fe4a
git push origin v0.6.9

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/118492

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.9 -m "<description of version>" 36d4458b83fcd008fef2a856bb8e30ce95259f0c
git push origin v0.6.9

[ufechner7]

@JuliaRegistrator register

Release notes:

KiteModels v0.6.10 2024-11-01

• fixed the installation of the examples
• updated the documentation
• the package Rotations is now re-exported by KiteModels
• reduce number of dependencies of the examples

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/118526

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v0.6.10 -m "<description of version>" 411ea00837d6d489d9b8d96533dc139723fef402
git push origin v0.6.10