[TOC]
The on attribute is used to install event handlers on elements. The events that are supported depend on the element.
The value for the syntax is a simple domain-specific language of the form:
eventName:targetId[.methodName[(arg1=value, arg2=value)]]See the table below for descriptions of each part of the syntax.
| Syntax | Required? | Description |
|---|---|---|
eventName |
yes | This is the name of the event that an element exposes. |
targetId |
yes | This is the DOM id for the element, or a predefined special target you'd like to execute an action on in response to the event. In the following example, the targetId is the DOM id of the amp-lightbox target, photo-slides.
<amp-lightbox id="photo-slides"></amp-lightbox> <button on="tap:photo-slides">Show Images</button> |
methodName |
no | This is for elements with default actions. This is the method that the target element (referenced by AMP has a concept of a default action that elements can implement. So when omitting the |
arg=value |
no | Some actions, if documented, may accept arguments. The arguments are defined between parentheses in key=value notation. The accepted values are:
|
You can listen to multiple events on an element by separating the events with a semicolon ;.
Example: on="submit-success:lightbox1;submit-error:lightbox2"
You can execute multiple actions in sequence for the same event by separating the actions with a comma ','.
Example: on="tap:target1.actionA,target2.actionB"
AMP defines a tap event globally that you can listen to on any HTML element (including AMP elements).
AMP also defines the hide, show and toggleVisibility actions globally that you can trigger on any HTML element.
{% call callout('Note', type='note') %}
An element can only be shown if it was previously hidden by a hide or toggleVisibility action, or by using the hidden attribute. The show action does not support elements hidden by CSS display:none or AMP's layout=nodisplay.
For example, the following is possible in AMP:
<div id="warning-message">Warning...</div>
<button on="tap:warning-message.hide">Cool, thanks!</button>{% endcall %}
| Event | Description |
|---|---|
tap |
Fired when the element is clicked/tapped. |
| Event | Description | Elements | Data |
|---|---|---|---|
change |
Fired when the value of the element is changed and committed.
Data properties mirror those in HTMLInputElement and HTMLSelectElement. |
input |
event.min event.max event.value event.valueAsNumber |
input[type="radio"],input[type="checkbox"] |
event.checked
|
||
select |
event.min event.max event.value |
||
input-debounced |
Fired when the value of the element is changed. This is similar to the standard change event, but it only fires when 300ms have passed after the value of the input has stopped changing. |
Elements that fire input event. |
Same as change event data. |
input-throttled |
Fired when the value of the element is changed. This is similar to the standard change event, but it is throttled to firing at most once every 100ms while the value of the input is changing. |
Elements that fire input event. |
Same as change event data. |
| Event | Description | Data |
|---|---|---|
slideChange |
Fired when the carousel's current slide changes. | // Slide number. event.index |
toggleAutoplay |
Will, on user tap or click, toggle the autoplay status for the carousel. You can either specify the status you want by specifying it: carousel-id.toggleAutoplay(toggleOn=false) or flip the status by not specifying a value. |
optional toggle status |
| Event | Description | Data |
|---|---|---|
lightboxOpen |
Fired when lightbox is fully visible. | None |
lightboxClose |
Fired when lightbox is fully closed. | None |
| Event | Description | Data |
|---|---|---|
select |
Fired when an option is selected or deselected. | // Target element's "option" attribute value. event.targetOption |
| Event | Description | Data |
|---|---|---|
sidebarOpen |
Fired when sidebar is fully opened after transition has ended. | None |
sidebarClose |
Fired when sidebar is fully closed after transition has ended. | None |
| Event | Description | Data |
|---|---|---|
firstPlay(low-trust) |
Fired the first time the video is played by the user. On autoplay videos, this is fired as soon as the user interacts with the video. This event is low-trust which means it can not trigger most actions; only low-trust actions such as amp-animation actions can be run. |
|
timeUpdate(low-trust) |
Fired when the playing position of a video has changed. Frequency of the event is controlled by AMP and is currently set at 1 second intervals. This event is low-trust which means it can not trigger most actions; only low-trust actions such as amp-animation actions can be run. |
{time, percent}time indicates the current time in seconds, percent is a number between 0 and 1 and indicates current position as percentage of total time. |
| Event | Description | Data |
|---|---|---|
submit |
Fired when the form is submitted. | |
submit-success |
Fired when the form submission response is success. | // Response JSON. event.response |
submit-error |
Fired when the form submission response is an error. | // Response JSON. event.response |
valid |
Fired when the form is valid. | |
invalid |
Fired when the form is invalid. |
| Action | Description |
|---|---|
hide |
Hides the target element. |
show |
Shows the target element. |
toggleVisibility |
Toggles the visibility of the target element. |
toggleClass(class=STRING, force=BOOLEAN) |
Toggles class of the target element. force is optional, and if defined, it ensures that class would only be added but not removed if set to true, and only removed but not added if set to false. |
scrollTo(duration=INTEGER, position=STRING) |
Scrolls an element into view with a smooth animation. If defined,
duration specifies the length of the animation in milliseconds
(default is 500ms). position is optional and takes one of
top, center or bottom defining where
in the viewport the element will be at the end of the scroll (default is
top). |
focus |
Makes the target element gain focus. To lose focus, focus
on another element (usually parent element). We strongly advise against
losing focus by focusing on body/documentElement
for accessibility reasons. |
| Action | Description |
|---|---|
play |
Plays the audio. Is a no-op if the <amp-audio> element is a descendant of <amp-story>. |
pause |
Pauses the audio. Is a no-op if the <amp-audio> element is a descendant of <amp-story>. |
| Action | Description |
|---|---|
play |
Plays the animation. |
pause |
Pauses the animation. |
stop |
Stops the animation. |
seekTo(time=INTEGER) |
Sets the currentTime of the animation to the specified value and pauses animation. |
seekTo(percent=[0,1]) |
Uses the given percentage value to determine the currentTime of the animation to the specified value and pauses animation. |
| Action | Description |
|---|---|
goToSlide(index=INTEGER) |
Advances the carousel to a specified slide index. |
| Action | Description |
|---|---|
open (default) |
Opens the image lightbox with the source image being the one that triggered the action. |
| Action | Description |
|---|---|
open (default) |
Opens the lightbox. |
close |
Closes the lightbox. |
| Action | Description |
|---|---|
refresh |
Refreshes data from the src and re-renders the list. |
| Action | Description |
|---|---|
update (default) |
Updates the DOM items to show updated content. |
| Action | Description |
|---|---|
selectUp(delta=INTEGER) |
Moves the selection up by the value of `delta`. The default `delta` is set to 1. |
selectDown(delta=INTEGER) |
Moves the selection down by the value of `delta`. The default `delta` is set to -1. |
toggle(index=INTEGER, value=BOOLEAN) |
Sets the selected element's `selected` attribute if value is 'true', otherwise removes the attribute |
| Action | Description |
|---|---|
open (default) |
Opens the sidebar. |
close |
Closes the sidebar. |
toggle |
Toggles the state of the sidebar. |
| Action | Description |
|---|---|
dismiss (default) |
Hides the referenced user notification element. |
The actions below are supported in the following AMP video elements: amp-video, amp-youtube, amp-3q-player, amp-brid-player, amp-dailymotion, amp-delight-player, amp-ima-video.
| Action | Description |
|---|---|
play |
Plays the video. |
pause |
Pauses the video. |
mute |
Mutes the video. |
unmute |
Unmutes the video. |
fullscreen |
Takes the video to fullscreen. |
| Action | Description |
|---|---|
clear |
Clears any values in the form's inputs. |
submit |
Submits the form. |
The following are targets provided by the AMP system that have special requirements:
The AMP target is provided by the AMP runtime and implements top-level
actions that apply to the whole document.
| Action | Description |
|---|---|
navigateTo(url=STRING, target=STRING, opener=BOOLEAN) |
Navigates current window to given URL, to the optional specified target if given (currenly only supporting _top and _blank ). The optional opener parameter can be specified when using a target of _blank to allow the newly opened page to access window.opener |
goBack |
Navigates back in history. |
print |
Opens the Print Dialog to print the current page. |
| scrollTo(id=STRING, duration=INTEGER, position=STRING) | Scrolls to the provided element ID on the current page. |
| optoutOfCid | Opts out of Client ID generation for all scopes. |
setState({foo: 'bar'})1 |
Requires amp-bind. Merges an object literal into the bindable state. |
pushState({foo: 'bar'})1 |
Requires amp-bind. Merges an object literal into the bindable state and pushes a new entry onto browser history stack. Popping the entry will restore the previous values of variables (in this example, |
1When used with multiple actions, subsequent actions will wait for setState() or pushState() to complete before invocation. Only a single setState() or pushState() is allowed per event.
The amp-access target is provided by the amp-access component.
The amp-access target is special for these reasons:
- You can't give an arbitrary ID to this target. The target is always
amp-access. - The actions for
amp-accessare dynamic depending on the structure of the AMP Access Configuration.
See details about using the amp-access target.