This library controls FED3, a device for training mice.

The files on this Github repository should be considered "beta", for the most recent stable release please install the FED3 library from the Arduino IDE as decribed below. See the [Wiki](https://github.com/KravitzLabDevices/FED3_library/wiki) for documentation on how to use the library. This library is in development, please report bugs using Issues.

Do you have custom FED3 code you want to add to the libary?
Submit it here!

---

Installation instructions

1. Install the Arduino IDE.

2. Add the Adafruit Feather M0 board definitions.

To allow the Arduino IDE to flash the FED3, go to File>Preferences and paste the following link into the field for Additional boards.

https://adafruit.github.io/arduino-board-index/package_adafruit_index.json

Then click Tools>Board>Boards Manager and type "Arduino SAMD" in the search bar. Install this, it will take ~5 minutes. Then search for "Adafruit SAMD" and install this as well.

See more details instructions on this step here.

3. Install the FED3 library from the Arduino IDE

Search for the FED3 libary in the Arduino library manager and install the latest version.

4. Install dependency libraries in your Arduino libraries folder

Navigate to the FED3 library in your Arduino libraries folder (usually: Documents\Arduino\libraries\FED3_library\) and look in the \extras directory for the FED3_support_libraries.zip file. Unzip the contents of this folder.

Copy the extracted libraries to \Arduino\libraries\.

5. Set the real time clock (RTC) on the FED3.

Open the "SetClock" example sketch in the Arduino IDE and flash this code to the FED3. You should see a message on the screen with the correct local time, indicating that the RTC was set correctly.

6. Flash an example (ClassicFED3 is a good one to start with)

Check out the example FED3 programs by clicking File > Examples > FED3

7. Start coding!

Check out the functions and variables of the FED3 library to start making custom programs.