Config
Each of the following files are populated at different stages of the bots runtime.
#Table of Contents
The bot will auto populate this with randomised but valid values on first launch.
{
"DeviceSettings": {
"DeviceId": "xxx",
"AndroidBoardName": "universal7420",
"AndroidBootloader": "G920FXXS3DPD2",
"DeviceBrand": "samsung",
"DeviceModel": "zeroflte",
"DeviceModelIdentifier": "SM-G920F",
"DeviceModelBoot": "qcom",
"HardwareManufacturer": "samsung",
"HardwareModel": "SM-G920F",
"FirmwareBrand": "zerofltexx",
"FirmwareTags": "release-keys",
"FirmwareType": "user",
"FirmwareFingerprint": "samsung/zerofltexx/zeroflte:6.0.1/MMB29K/G920FXXS3DPD2:user/release-keys"
},###Scheduled Intervals
If UseGPXPathing is set to false,
Evolution, upgrading, transferring and recycling will execute every 5th Pokestop.
Sniping will execute every Pokestop.
If UseGPXPathing is set to true and GPXFile is found,
Evolution, updating, transferring, recycling and sniping will execute every second or based on the value in milliseconds forMinDelayBetweenSnipes (whichever is higher).
Altitude that the bot starts at. Not advised to change this from the default as Niantic does not check altitude.
Latitude that the bot starts at. Must be between -90 and 90 values.
Longitude that the bot starts at. Must be between -180 and 180 values
Instead of walking, the bot teleports to travel. This can occur additional softbans, but it is still more efficient for xp/hr.
Obvious walking speed in kilometers per hour. This value is ignored if Teleport is set to true
In meters, how far the bot will travel in a radius from the original default location.
When UseGPXPathing is set to true, the bot will walk to the first point in the GPX path defined by the value in GPXFile and traverse each point. By default the bot wanders around the radius defined in MaxTravelDistanceInMeters.
Only used when UseGPXPathing is set to TRUE
Path of the GPX file relative to the .exe file. Place the GPX file in the same directory as the exe
When PokeMobBot boots, the default location will be offset based on this multiplier. Most users will not need to modify this.
PokeMobBot will use the value from PokestopSkipLuckyNumber as your lucky number when rolling a dice, skipping the next stop if hit when set to true`.
Your lucky number, needs to be within range of PokestopSkipLuckyMinand PokestopSkipLuckyMax.
The lowest number available to roll.
The highest number available to roll.
Randomises your walking speed at the interval of MinutesUntilRandomizeWalkingSpeed.
Time between randomising your speed, lowest value is 1 (minute).
Lowest available speed to randomise from in km/h.
Highest available speed to randomise from in km/h,
Uses Mapzen API to automagically get elevation for your location if set to true
Your Mapzen Elevation API key in the format of elevation-XXXXXXX
Executes based on the scheduled interval
When EvolveAllPokemonAboveIV is set to true, any Pokemon that is above the EvolveAboveIVValue value will be evolved if there are enough candies.
Only when EvolveAllPokemonAboveIV is set to true
Value used to determine what IV Pokemon should be automatically evolved at.
When EvolveAllPokemonWithEnoughCandy is set to true, any Pokemon listed in the PokemonsToEvolve list will be evolved every 5 Pokestops limited by the number of Pokemon and candies you have. If this is not set, Pokemon will not be evolved based on this list criteria.
Only used if EvolveAllPokemonWithEnoughCandy is set to true.
Comma-seperated quote-wrapped list of Pokemon names that distinguish which Pokemon to automatically evolve if there are enough candies.
When PokeMobBot determines how many Pokemon to transfer due to duplicates, it will create a count based on the number of candies the account has for that species compared to the number required to evolve.
For example, if the account has 5 Pidgeys (12 candies to evolve) and 24 candies, PokeMobBot will keep the top two Pidgeys and transfer the rest.
##Upgrading
Executes based on the scheduled interval
When AutomaticallyLevelUpPokemon is set to true, a randomly selected Pokemon will be leveled up one step based on the scheduled interval.
NOTE: Only ifAutomaticallyLevelUpPokemon is set to true
This option specifies whether to use UpgradePokemonCpMinimum or UpgradePokemonIvMinimum when sorting the list of potential Pokemon to level up. This will give priority to IV or CP if stardust resources are limited. Any Pokemon above the UpgradePokemonCpMinimum and UpgradePokemonIvMinimum values will be scheduled for upgrade.
NOTE: Only ifAutomaticallyLevelUpPokemon is set to true.
Any Pokemon above this both of these thresholds in CP and IV respectively will be leveled up by one step given sufficient resources.
Executes based on the scheduled interval
When PrioritizeIVOverCP is set to true, the bot will sort by IV instead of CP when deciding which Pokemon to transfer out of a group of duplicate Pokemon. By default, the bot sorts by CP.
When TransferDuplicatePokemon is set to true, any Pokemon that meets the below criteria is transferred:
- Total number of that Pokemon species in your inventory is greater than
KeepMinDuplicatePokemon - Below the
KeepMinIVPercentagevalue - Below the
KeepMinCPvalue - Is not listed in your
PokemonsNotToTransferlist
Note that any of the first three criteria are global values and they CAN be overwritten by the Pokemon-specific settings in the PokemonsTransferFilter list.
NOTE: Only used if TransferDuplicatePokemon is set to true
This is a global setting that applies to any Pokemon that has not been overridden by an entry in the PokemonsTransferFilter list.
This value specifies how many duplicates of each Pokemon to keep when deciding what Pokemon to transfer. This number can be Pokemon-specific by creating an entry in the PokemonsTransferFilter list. A Pokemon can also be excluded from transfer with the PokemonsNotToTransfer list.
NOTE: Only used if TransferDuplicatePokemon is set to true
This is a global setting that applies to any Pokemon that has not been overridden by an entry in the PokemonsTransferFilter list.
This value specifies that a Pokemon that has an IV higher than this value will not be transferred. This number can be Pokemon-specific by creating an entry in the PokemonsTransferFilter list. A Pokemon can also be excluded from transfer with the PokemonsNotToTransfer list.
NOTE: Only used if TransferDuplicatePokemon is set to true
This is a global setting that applies to any Pokemon that has not been overridden by an entry in the PokemonsTransferFilter list.
This value specifies that a Pokemon that has an CP higher than this value will not be transferred. This number can be Pokemon-specific by creating an entry in the PokemonsTransferFilter list. A Pokemon can also be excluded from transfer with the PokemonsNotToTransfer list.
Only used if TransferDuplicatePokemon is set to true
Comma-seperated quote-wrapped list of Pokemon names that distinguish what Pokemon to keep regardless of their IV or CP so that they are not transferred. Pokemon in this list should never be transferred by PokeMobBot.
Only used if TransferDuplicatePokemon is set to true
This list of Pokemon names lets you set the KeepMinDuplicatePokemon, KeepMinIVPercentage, and KeepMinCP values specific to each Pokemon. This lets you override the default global values for those.
Therefore, if you have an entry in PokemonTransferFilter like below:
"KeepMinCp": 1000,
"KeepMinDuplicatePokemon": 1,
"KeepMinIvPercentage": 90.0,
"PokemonsTransferFilter": {
"Pinsir": {
"KeepMinCp": 500,
"KeepMinIvPercentage": 70.0,
"KeepMinDuplicatePokemon": 2
}
}then PokeMobBot will transfer any Pinsirs that are below 500 CP and below 70% IV while keeping 2 duplicates.
When UsePokemonToNotCatchFilter is set to true, any Pokemon listed in the PokemonsToIgnore list will be skipped when determining what Pokemon to catch.
Only used if UsePokemonToNotCatchFilter is set to true.
Comma-seperated quote-wrapped list of Pokemon names that distinguish what Pokemon to ignore when searching to catch.
Specifies the number of pokeballs to use per pokemon before giving up the encounter.
List of pokemon that PokeMobBot is forced to use Masterball on.
If a Pokemon is above this CP, use a Great ball.
If a Pokemon is above this CP, use an Ultra ball.
If a Pokemon is above this CP, use a Master ball.
If HumanizeThrows is set to true, the below throwing values will be utilized when throwing pokeballs during catching. PokeMobBot will randomly select a range between ThrowAccuracyMax and ThrowAccuracyMin to determine if it should miss or not.
If set to false, PokeMobBot will throw an excellent throw with a spin every time.
Minimum accuracy for humanize throw
Maximum accuracy for humanize throw
Chance to spin for extra experience
Frequency to entirely miss a throw.
Frequency to throw inside the smaller circle.
NOTE: PokeMobBot will use a razzberry if any of the conditions are true:
Use berry if Pokemon is above this CP value
Use berry if Pokemon is above this IV value
Use berry if catch probability is below this value
Executes based on the scheduled interval
Make sure to follow the Sniping Guide for more details
When set to 'true', PokeMobBot will go on a sniping journey to each of the coordinates listed in the PokemonToSnipe list and try to catch the Pokemon listed in that same PokemonToSnipe list. Pokemon are not mapped to a location. So if you have 2 coordinates and two Pokemon listed, it will catch for both Pokemon in both locations.
If UseSnipeLocationServer is set to true, PokeMobBot will use that for location and pokemon sniping.
JSON formatted list of coordinate and Pokemon entries used by SnipeAtPokestops to hunt down specific locations for specific pokemon.
Example:
"PokemonToSnipe": {
"Locations": [
{
"Latitude": 38.556807486461118,
"Longitude": -121.2383794784546
},
{
"Latitude": -33.859019,
"Longitude": 151.213098
},
{
"Latitude": 47.5014969,
"Longitude": -122.0959568
},
{
"Latitude": 51.5025343,
"Longitude": -0.2055027
},
{
"Latitude": 35.668465050004,
"Longitude": 139.70481913813
}
],
"Pokemon": [
"Dratini",
"Magikarp",
"Eevee",
"Charmander",
"Snorlax",
"Porygon"
]
}When PokeMobBot goes on a sniping journey, it will only proceed if the number of pokeball-type items it has exceeds this value.
During a sniping journey, PokeMobBot will end the journey if the number of pokeball-type items becomes less than this value when hopping between locations.
Toggle to use a locally hosted location feeder service that PokeMobBot can use to dynamically populate potential sniping locations.
Toggle to reference PokeSnipers.com for dynamic location sniping locations.
See Sniping Guide for more info.
Used when UseSnipeLocationServer is set to true
Hostname of the sniping location service. Defaults to localhost
Used when UseSnipeLocationServer is set to true
If PokeMobBot cannot determine the IV value from the sniping location service and this value is set to true, it will snipe them anyways. If set to false, PokeMobBot will ignore the Pokemon.
Used when UseSnipeLocationServer is set to true
Defines the specific port PokeMobBot should connect to for the SnipeLocationServer value.
When UseTransferIvForSnipe is set to true, PokeMobBot will use the the global KeepMinIvPercentage value and PokemonTransferFilter list to determine if it should attempt to snipe a Pokemon.
Value in seconds before PokeMobBot timesout when querying SkipLagged for Pokemon data.
Executes based on the scheduled interval
Automatically incubates eggs in order that they are listed in the inventory when the bot first runs.
When UseLuckyEggsWhileEvolving is set to true, PokeMobBot will hold-off on evolving Pokemon until there are enough evolutions to meet the value in useLuckyEggsMinPokemonAmount and then proceed to use a Lucky Egg before evolving them.
Before triggering the evolve step, the bot will use a lucky egg if one has not been used in the past 30 minutes.
Value used when evolving to determine the number of evolutions needed to trigger a Lucky Egg use.
List of max values mapped to each non-Pokeball, non-potion, and non-revive Pokemon Go item. During the recycling stage, any item that is over the max count is recycled to meet the value. This is to prevent full inventories.
Total amount of pokeball-type items to keep. PokeMobBot will try to intelligently prioritize higher pokeballs when farming Pokestops.
Total amount of potion-type items to keep. PokeMobBot will try to intelligently prioritize higher potions when farming Pokestops.
Total amount of revive-type items to keep. PokeMobBot will try to intelligently prioritize higher revives when farming Pokestops.
Recycle based on a percentage of your items instead of hard set values
On startup, PokeMobBot displays a list of the top CP/IV Pokemon in your inventory, this setting will change how many Pokemon to display.
PokeMobBot will detect if it needs to update if set to true
Delay in milliseconds between attempts to catch a Pokemon.
Delay in milliseconds for the minimum randomised value to subtract.
Delay in milliseconds for the maximum randomised value to add.
Uses MaxRandomizeDelayMilliseconds and MinRandomizeDelayMilliseconds to scramble all delays on every launch.
Delay in milliseconds between transfers/recycles/evolutions/etc.
Delay in milliseconds between checking state.
Delay in milliseconds at PokeStop.
Delay in milliseconds before throwing a ball to catch the Pokemon.
Delay in milliseconds between catching Pokemons.
Delay in milliseconds to catch nearby Pokemon.
Delay in milliseconds to catch lured Pokemon.
Delay in milliseconds to catch Pokemon attracted by Incense.
Delay in milliseconds for evolving Pokemon.
Delay in milliseconds for transferring Pokemon.
Delay in milliseconds for displaying Pokemon on launch.
Delay in milliseconds to trigger lucky eggs.
Delay in milliseconds to try to spin stops for unbanning.
Delay in milliseconds for recycling items.
Delay in milliseconds for sniping Pokemon.
When set to 'true', PokeMobBot will output a .txt file of the list of Pokemon in your inventory sorted by IV in a Dumps directory.
When RenamePokemon is set to true, Pokemon are renamed based on the template defined in RenameTemplate.
When RenamePokemon and RenameAboveIv are set to true, any Pokemon above the value in KeepMinIvPercentage is renamed.
Format used by PokeMobBot to rename Pokemon. No need to modify.
When PokeMobBot runs, if this is set to 'true', it will ask for you to verify the coordinates before proceeding. Setting it to 'false' will skip this prompt.
When PokeMobBot automatically updates, it will attempt to transfer any pre-existing config and auth values into the new config/auth structure. Any values that cannot be determined will be preset with the defaults.
Translation code for PokeMobBot. Supported values can be found in the config/translations folder.
Port used by PokeMobBot for potential GUI implementations. Should not be modified.
Set to google for Google
Set to ptc for Pokemon Trainer Club
Depreciated value not used anymore.
Google account username used when AuthType is set to google
Google account password used when AuthType is set to google
Pokemon Trainer Club username used when AuthType is set to ptc
Pokemon Trainer Club username used when AuthType is set to ptc
The contents of this repo are a proof of concept and are for educational use only