======================================================
============= RG350 BUILD INSTRUCTIONS ===============
======================================================

### Pre-Build Steps ###

$ sudo apt-get update
$ sudo apt-get install bison flex gettext texinfo wget cpio python unzip mercurial subversion libncurses5-dev libc6-dev-i386 bzr libssl-dev g++-multilib rsync java-wrappers mtools default-jdk ecj
## you need a javac compiler, (i.e. sudo apt-get install gcj-4.9-jdk)

Make the folder /opt and download http://www.gcw-zero.com/files/opendingux-gcw0-toolchain.2014-08-20.tar.bz2
how superuser move the bz2 file in /opt folder and type

/opt$ sudo tar jxvf ./opendingux-gcw0-toolchain.2014-08-20.tar.bz2
/opt$ sudo rm -rf ./opendingux-gcw0-toolchain.2014-08-20.tar.bz2

the next step is add the GCW0 Path in .bashrc file in your home folder, type this in the last line in the file:

export PATH="/opt/gcw0-toolchain/usr/bin:${PATH}:/opt/gcw0-toolchain/usr/mipsel-gcw0-linux-uclibc/sysroot/usr/bin"

### Build Steps ###

## Enter the directory where you want to clone the git repo
$ git clone https://github.com/Ninoh-FOX/toolchain.git
$ cd toolchain
$ make rg350_defconfig
$ make

======================================================


To build and use the buildroot stuff, do the following:

1) run 'make menuconfig'
2) select the packages you wish to compile
3) run 'make'
4) wait while it compiles
5) Use your shiny new root filesystem. Depending on which sort of
    root filesystem you selected, you may want to loop mount it,
    chroot into it, nfs mount it on your target device, burn it
    to flash, or whatever is appropriate for your target system.

You do not need to be root to build or run buildroot.  Have fun!

Offline build:
==============

In order to do an offline-build (not connected to the net), fetch all
selected source by issuing a
$ make source

before you disconnect.
If your build-host is never connected, then you have to copy buildroot
and your toplevel .config to a machine that has an internet-connection
and issue "make source" there, then copy the content of your dl/ dir to
the build-host.

Building out-of-tree:
=====================

Buildroot supports building out of tree with a syntax similar
to the Linux kernel. To use it, add O=<directory> to the
make command line, E.G.:

$ make O=/tmp/build

And all the output files (including .config) will be located under /tmp/build.

More finegrained configuration:
===============================

You can specify a config-file for uClibc:
$ make UCLIBC_CONFIG_FILE=/my/uClibc.config

And you can specify a config-file for busybox:
$ make BUSYBOX_CONFIG_FILE=/my/busybox.config

To use a non-standard host-compiler (if you do not have 'gcc'),
make sure that the compiler is in your PATH and that the library paths are
setup properly, if your compiler is built dynamically:
$ make HOSTCC=gcc-4.3.orig HOSTCXX=gcc-4.3-mine

Depending on your configuration, there are some targets you can use to
use menuconfig of certain packages. This includes:
$ make HOSTCC=gcc-4.3 linux-menuconfig
$ make HOSTCC=gcc-4.3 uclibc-menuconfig
$ make HOSTCC=gcc-4.3 busybox-menuconfig

Please feed suggestions, bug reports, insults, and bribes back to the
buildroot mailing list: buildroot@buildroot.org