Automatic commit from workflow

CAD/deps/TF-G2_assembly.dep

@@ -0,0 +1,206 @@
+assembly.scad: \
+	../../bolt_parameters.scad \
+	../../parameters.scad \
+	../888_1001.scad \
+	../888_1002.scad \
+	../888_1003.scad \
+	../888_1004.scad \
+	../888_1006.scad \
+	../888_1007.scad \
+	../888_1010.scad \
+	../888_1011.scad \
+	../888_1012.scad \
+	position/position_888_1001.scad \
+	position/position_888_1002.scad \
+	position/position_888_1003.scad \
+	position/position_888_1006.scad \
+	position/position_888_1007.scad \
+	position/position_888_1010.scad \
+	position/position_888_1011.scad \
+	position/position_888_1012.scad \
+	position/position_motor.scad \
+	position/position_rotorhead.scad \
+	position/position_screw_01.scad \
+	../lib/NopSCAD/core.scad \
+	../lib/NopSCAD/global_defs.scad \
+	../lib/NopSCAD/lib.scad \
+	../lib/NopSCAD/printed/fan_guard.scad \
+	../lib/NopSCAD/utils/bezier.scad \
+	../lib/NopSCAD/utils/core/bom.scad \
+	../lib/NopSCAD/utils/core/clip.scad \
+	../lib/NopSCAD/utils/core/core.scad \
+	../lib/NopSCAD/utils/core/global.scad \
+	../lib/NopSCAD/utils/core/polyholes.scad \
+	../lib/NopSCAD/utils/core/rounded_rectangle.scad \
+	../lib/NopSCAD/utils/core/sphere.scad \
+	../lib/NopSCAD/utils/core/teardrops.scad \
+	../lib/NopSCAD/utils/dogbones.scad \
+	../lib/NopSCAD/utils/fillet.scad \
+	../lib/NopSCAD/utils/gears.scad \
+	../lib/NopSCAD/utils/hanging_hole.scad \
+	../lib/NopSCAD/utils/layout.scad \
+	../lib/NopSCAD/utils/maths.scad \
+	../lib/NopSCAD/utils/offset.scad \
+	../lib/NopSCAD/utils/quadrant.scad \
+	../lib/NopSCAD/utils/round.scad \
+	../lib/NopSCAD/utils/rounded_cylinder.scad \
+	../lib/NopSCAD/utils/rounded_polygon.scad \
+	../lib/NopSCAD/utils/rounded_triangle.scad \
+	../lib/NopSCAD/utils/sector.scad \
+	../lib/NopSCAD/utils/sweep.scad \
+	../lib/NopSCAD/utils/thread.scad \
+	../lib/NopSCAD/utils/tube.scad \
+	../lib/NopSCAD/vitamins/7_segment.scad \
+	../lib/NopSCAD/vitamins/7_segments.scad \
+	../lib/NopSCAD/vitamins/axial.scad \
+	../lib/NopSCAD/vitamins/axials.scad \
+	../lib/NopSCAD/vitamins/ball_bearing.scad \
+	../lib/NopSCAD/vitamins/ball_bearings.scad \
+	../lib/NopSCAD/vitamins/batteries.scad \
+	../lib/NopSCAD/vitamins/battery.scad \
+	../lib/NopSCAD/vitamins/bearing_block.scad \
+	../lib/NopSCAD/vitamins/bearing_blocks.scad \
+	../lib/NopSCAD/vitamins/belt.scad \
+	../lib/NopSCAD/vitamins/belts.scad \
+	../lib/NopSCAD/vitamins/bldc_motor.scad \
+	../lib/NopSCAD/vitamins/bldc_motors.scad \
+	../lib/NopSCAD/vitamins/blower.scad \
+	../lib/NopSCAD/vitamins/blowers.scad \
+	../lib/NopSCAD/vitamins/box_section.scad \
+	../lib/NopSCAD/vitamins/box_sections.scad \
+	../lib/NopSCAD/vitamins/bulldog.scad \
+	../lib/NopSCAD/vitamins/bulldogs.scad \
+	../lib/NopSCAD/vitamins/button.scad \
+	../lib/NopSCAD/vitamins/buttons.scad \
+	../lib/NopSCAD/vitamins/cable_strip.scad \
+	../lib/NopSCAD/vitamins/camera.scad \
+	../lib/NopSCAD/vitamins/cameras.scad \
+	../lib/NopSCAD/vitamins/circlip.scad \
+	../lib/NopSCAD/vitamins/circlips.scad \
+	../lib/NopSCAD/vitamins/component.scad \
+	../lib/NopSCAD/vitamins/components.scad \
+	../lib/NopSCAD/vitamins/d_connector.scad \
+	../lib/NopSCAD/vitamins/d_connectors.scad \
+	../lib/NopSCAD/vitamins/dip.scad \
+	../lib/NopSCAD/vitamins/display.scad \
+	../lib/NopSCAD/vitamins/displays.scad \
+	../lib/NopSCAD/vitamins/e3d.scad \
+	../lib/NopSCAD/vitamins/extrusion.scad \
+	../lib/NopSCAD/vitamins/extrusion_bracket.scad \
+	../lib/NopSCAD/vitamins/extrusion_brackets.scad \
+	../lib/NopSCAD/vitamins/extrusions.scad \
+	../lib/NopSCAD/vitamins/fan.scad \
+	../lib/NopSCAD/vitamins/fans.scad \
+	../lib/NopSCAD/vitamins/fuseholder.scad \
+	../lib/NopSCAD/vitamins/geared_stepper.scad \
+	../lib/NopSCAD/vitamins/geared_steppers.scad \
+	../lib/NopSCAD/vitamins/green_terminal.scad \
+	../lib/NopSCAD/vitamins/green_terminals.scad \
+	../lib/NopSCAD/vitamins/hot_end.scad \
+	../lib/NopSCAD/vitamins/hot_ends.scad \
+	../lib/NopSCAD/vitamins/hygrometer.scad \
+	../lib/NopSCAD/vitamins/iec.scad \
+	../lib/NopSCAD/vitamins/iecs.scad \
+	../lib/NopSCAD/vitamins/insert.scad \
+	../lib/NopSCAD/vitamins/inserts.scad \
+	../lib/NopSCAD/vitamins/jack.scad \
+	../lib/NopSCAD/vitamins/jhead.scad \
+	../lib/NopSCAD/vitamins/ldr.scad \
+	../lib/NopSCAD/vitamins/ldrs.scad \
+	../lib/NopSCAD/vitamins/leadnut.scad \
+	../lib/NopSCAD/vitamins/leadnuts.scad \
+	../lib/NopSCAD/vitamins/led.scad \
+	../lib/NopSCAD/vitamins/led_meter.scad \
+	../lib/NopSCAD/vitamins/leds.scad \
+	../lib/NopSCAD/vitamins/light_strip.scad \
+	../lib/NopSCAD/vitamins/light_strips.scad \
+	../lib/NopSCAD/vitamins/linear_bearing.scad \
+	../lib/NopSCAD/vitamins/linear_bearings.scad \
+	../lib/NopSCAD/vitamins/magnet.scad \
+	../lib/NopSCAD/vitamins/magnets.scad \
+	../lib/NopSCAD/vitamins/mains_socket.scad \
+	../lib/NopSCAD/vitamins/mains_sockets.scad \
+	../lib/NopSCAD/vitamins/microswitch.scad \
+	../lib/NopSCAD/vitamins/microswitches.scad \
+	../lib/NopSCAD/vitamins/microview.scad \
+	../lib/NopSCAD/vitamins/module.scad \
+	../lib/NopSCAD/vitamins/modules.scad \
+	../lib/NopSCAD/vitamins/nut.scad \
+	../lib/NopSCAD/vitamins/nuts.scad \
+	../lib/NopSCAD/vitamins/o_ring.scad \
+	../lib/NopSCAD/vitamins/opengrab.scad \
+	../lib/NopSCAD/vitamins/panel_meter.scad \
+	../lib/NopSCAD/vitamins/panel_meters.scad \
+	../lib/NopSCAD/vitamins/pcb.scad \
+	../lib/NopSCAD/vitamins/pcbs.scad \
+	../lib/NopSCAD/vitamins/pillar.scad \
+	../lib/NopSCAD/vitamins/pillars.scad \
+	../lib/NopSCAD/vitamins/pillow_block.scad \
+	../lib/NopSCAD/vitamins/pillow_blocks.scad \
+	../lib/NopSCAD/vitamins/pin_header.scad \
+	../lib/NopSCAD/vitamins/pin_headers.scad \
+	../lib/NopSCAD/vitamins/potentiometer.scad \
+	../lib/NopSCAD/vitamins/potentiometers.scad \
+	../lib/NopSCAD/vitamins/psu.scad \
+	../lib/NopSCAD/vitamins/psus.scad \
+	../lib/NopSCAD/vitamins/pulley.scad \
+	../lib/NopSCAD/vitamins/pulleys.scad \
+	../lib/NopSCAD/vitamins/rail.scad \
+	../lib/NopSCAD/vitamins/rails.scad \
+	../lib/NopSCAD/vitamins/ring_terminal.scad \
+	../lib/NopSCAD/vitamins/ring_terminals.scad \
+	../lib/NopSCAD/vitamins/rocker.scad \
+	../lib/NopSCAD/vitamins/rockers.scad \
+	../lib/NopSCAD/vitamins/rod.scad \
+	../lib/NopSCAD/vitamins/screw.scad \
+	../lib/NopSCAD/vitamins/screws.scad \
+	../lib/NopSCAD/vitamins/sealing_strip.scad \
+	../lib/NopSCAD/vitamins/servo_motor.scad \
+	../lib/NopSCAD/vitamins/servo_motors.scad \
+	../lib/NopSCAD/vitamins/shaft_coupling.scad \
+	../lib/NopSCAD/vitamins/shaft_couplings.scad \
+	../lib/NopSCAD/vitamins/sheet.scad \
+	../lib/NopSCAD/vitamins/sheets.scad \
+	../lib/NopSCAD/vitamins/sk_bracket.scad \
+	../lib/NopSCAD/vitamins/sk_brackets.scad \
+	../lib/NopSCAD/vitamins/smd.scad \
+	../lib/NopSCAD/vitamins/smds.scad \
+	../lib/NopSCAD/vitamins/spade.scad \
+	../lib/NopSCAD/vitamins/spades.scad \
+	../lib/NopSCAD/vitamins/spool.scad \
+	../lib/NopSCAD/vitamins/spools.scad \
+	../lib/NopSCAD/vitamins/spring.scad \
+	../lib/NopSCAD/vitamins/springs.scad \
+	../lib/NopSCAD/vitamins/ssr.scad \
+	../lib/NopSCAD/vitamins/ssrs.scad \
+	../lib/NopSCAD/vitamins/stepper_motor.scad \
+	../lib/NopSCAD/vitamins/stepper_motors.scad \
+	../lib/NopSCAD/vitamins/swiss_clip.scad \
+	../lib/NopSCAD/vitamins/swiss_clips.scad \
+	../lib/NopSCAD/vitamins/terminal.scad \
+	../lib/NopSCAD/vitamins/toggle.scad \
+	../lib/NopSCAD/vitamins/toggles.scad \
+	../lib/NopSCAD/vitamins/transformer.scad \
+	../lib/NopSCAD/vitamins/transformers.scad \
+	../lib/NopSCAD/vitamins/tubing.scad \
+	../lib/NopSCAD/vitamins/tubings.scad \
+	../lib/NopSCAD/vitamins/variac.scad \
+	../lib/NopSCAD/vitamins/variacs.scad \
+	../lib/NopSCAD/vitamins/veroboard.scad \
+	../lib/NopSCAD/vitamins/washer.scad \
+	../lib/NopSCAD/vitamins/washers.scad \
+	../lib/NopSCAD/vitamins/wire.scad \
+	../lib/NopSCAD/vitamins/ziptie.scad \
+	../lib/NopSCAD/vitamins/zipties.scad \
+	../lib/TFSLOT01/CAD/parameters.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/bolts.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/curvedPipe.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/maths.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/moreShapes.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/vector.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/naca4.scad \
+	../lib/TFSLOT01/CAD/src/tfslot_888_1001.scad \
+	../lib/stdlib/motors.scad \
+	../lib/stdlib/naca4.scad \
+	../lib/stdlib/servos.scad \
+	../lib/stdlib/silentblock.scad \

CAD/deps/TF-G2_assembly_chassi.dep

@@ -0,0 +1,15 @@
+assembly_chassi.scad: \
+	../../bolt_parameters.scad \
+	../../parameters.scad \
+	../888_1001.scad \
+	../888_1002.scad \
+	../888_1003.scad \
+	../888_1004.scad \
+	../888_1018.scad \
+	../888_1021.scad \
+	position/position_888_1001.scad \
+	position/position_888_1002.scad \
+	position/position_888_1003.scad \
+	position/position_888_1018.scad \
+	position/position_888_1021.scad \
+	../lib/stdlib/naca4.scad \

CAD/deps/TF-G2_assembly_freeflap.dep

@@ -0,0 +1,6 @@
+assembly_freeflap.scad: \
+	../../bolt_parameters.scad \
+	../../parameters.scad \
+	../888_4009.scad \
+	../888_4010.scad \
+	../lib/stdlib/naca4.scad \

CAD/deps/TF-G2_assembly_pylon.dep

@@ -0,0 +1,26 @@
+assembly_pylon.scad: \
+	../../bolt_parameters.scad \
+	../../parameters.scad \
+	../888_1007.scad \
+	../888_1009.scad \
+	../888_1010.scad \
+	../888_1011.scad \
+	../888_1012.scad \
+	position/position_888_1007.scad \
+	position/position_888_1007_silentblocks.scad \
+	position/position_888_1009.scad \
+	position/position_888_1010.scad \
+	position/position_888_1011.scad \
+	position/position_888_1012.scad \
+	position/position_rotorhead.scad \
+	../lib/TFSLOT01/CAD/parameters.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/bolts.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/curvedPipe.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/maths.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/moreShapes.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/vector.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/naca4.scad \
+	../lib/TFSLOT01/CAD/src/tfslot_888_1001.scad \
+	../lib/stdlib/naca4.scad \
+	../lib/stdlib/servos.scad \
+	../lib/stdlib/silentblock.scad \

CAD/deps/TF-G2_assembly_rotor_head.dep

@@ -0,0 +1,23 @@
+assembly_rotor_head.scad: \
+	../../bolt_parameters.scad \
+	../../parameters.scad \
+	../888_1007.scad \
+	../888_1009.scad \
+	../888_1010.scad \
+	../888_1011.scad \
+	../888_1012.scad \
+	position/position_888_1009.scad \
+	position/position_888_1010.scad \
+	position/position_888_1011.scad \
+	position/position_888_1012.scad \
+	../lib/TFSLOT01/CAD/parameters.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/bolts.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/curvedPipe.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/maths.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/moreShapes.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/vector.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/naca4.scad \
+	../lib/TFSLOT01/CAD/src/tfslot_888_1001.scad \
+	../lib/stdlib/naca4.scad \
+	../lib/stdlib/servos.scad \
+	../lib/stdlib/silentblock.scad \

CAD/deps/TF-G2_assembly_rotorhead_complete.dep

@@ -0,0 +1,37 @@
+assembly_rotorhead_complete.scad: \
+	../../parameters.scad \
+	../lib/stdlib/dimlines.scad \
+	../lib/stdlib/naca4.scad \
+	../../bolt_parameters.scad \
+	../../parameters.scad \
+	../888_1010.scad \
+	../888_1011.scad \
+	../888_1012.scad \
+	../888_4001.scad \
+	../888_4002.scad \
+	../888_4003.scad \
+	../888_4004.scad \
+	../888_4005.scad \
+	../888_4006.scad \
+	../888_4007.scad \
+	../888_4008.scad \
+	position/position_888_1010.scad \
+	position/position_888_1011.scad \
+	position/position_888_1012.scad \
+	position/position_rotor.scad \
+	position/position_rotor_parts.scad \
+	position/position_rotorhead.scad \
+	../lib/PrintedRotor/RotorBlade.scad \
+	../lib/TFSLOT01/CAD/parameters.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/bolts.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/curvedPipe.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/maths.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/moreShapes.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/curvedPipe/vector.scad \
+	../lib/TFSLOT01/CAD/src/lib/stdlib/naca4.scad \
+	../lib/TFSLOT01/CAD/src/tfslot_888_1001.scad \
+	../lib/stdlib/TextGenerator.scad \
+	../lib/stdlib/dimlines.scad \
+	../lib/stdlib/naca4.scad \
+	../lib/stdlib/polyScrewThread_r1.scad \
+	../lib/stdlib/servos.scad \