Clap Detection System

Overview

This project implements a clap detection system using an a mic or raw audio data as input. It can detect clap patterns including single and double claps.

Features

• Clap pattern detection.
• Dynamic threshold adjustment for robust clap detection.
• Bandpass filtering to focus on clap frequencies.
• Audio recording and saving capabilities.

Troubleshooting

PyAudio

• Option A

  If clap-detector fails to install due to pyaudio issues, try to install portaudio19 using sudo apt install portaudio19-dev, then install clap-detector normally using pip install clap-detector.

• Option B

  If pyaudio still fails to install after trying option A, try to install it using sudo apt install python3-pyaudio, then install clap-detector normally pip install clap-detector.

Input

• If there are issues with audio input, check the inputDevice in the ClapDetector constructor.

Accuracy

• Adjust the bandpass filter parameters for better clap detection in different environments.

Requirements

• Python3
• PyAudio
• NumPy
• SciPy

Installation

option A:

1. install from the official pypi package:

   pip install clap-detector

option B:

1. Install the required Python packages:

   pip install pyaudio numpy scipy

2. Clone the repository:

   git clone https://github.com/TzurSoffer/clapDetection/
   cd clapDetection/src/clapDetector

3. Run the clap detection script:

   python clapDetector.py

Configuration

• Adjust parameters in the ClapDetector class constructor to fine-tune the clap detection system.

Usage

option A:

1. clone the repository, if you have not already using git clone https://github.com/TzurSoffer/clapDetection/

2. go into the examples folder and choose one of the scripts you would like to run.

option B:

1. Create a script that uses this library

   import time
   from clapDetector import ClapDetector, printDeviceInfo
   
   print("""
         --------------------------------
         The application initially attempts to use the system's default audio device. If this doesn't work or if you prefer to use a different device, you can change it. Below are the available audio devices. Find the one you are using and change the 'inputDevice' variable to the name or index of your preferred audio device. Then, restart the program, and it should properly capture audio.
         --------------------------------
         """)
   printDeviceInfo()
   
   thresholdBias = 6000
   lowcut=200               #< increase this to make claps detection more strict 
   highcut=3200             #< decrease this to make claps detection more strict
   clapDetector = ClapDetector(inputDevice=-1, logLevel=10)
   clapDetector.initAudio()
   
   try:
      while True:
         audioData = clapDetector.getAudio()
   
         result = clapDetector.run(thresholdBias=thresholdBias, lowcut=lowcut, highcut=highcut, audioData=audioData)
         resultLength = len(result)
         if resultLength == 2:
               print(f"Double clap detected! bias {thresholdBias}, lowcut {lowcut}, and highcut {highcut}")
               clapDetector.saveAudio(folder="./")
         time.sleep(1/60)
   
   except KeyboardInterrupt:
      print("Exited gracefully")
   except Exception as e:
      print(f"error: {e}")
   finally:
      clapDetector.stop()

2. The system will continuously monitor audio input and detect claps.

License

This project is licensed under the MIT License - see the LICENSE file for details.