Skip to content

First configuration steps

Markus Neubauer edited this page Dec 4, 2015 · 3 revisions

Make screenshots of the new setup before you modify anything as these will be helping examples if things go wrong!

We recommend a screenshot backup at least of the Gateway group, SIP gateways, and all routing examples. Also do a backup of /etc/gemeinschaft to /etc/gemeinschaft.example before modifiying the setup on the command line.

If you have done so, you may safely delete all entries which you do not need for your personal setup, within

  • Routes
  • Administration - > Users

and start with the configuration of your needs.

Basics

Incoming calls

Do receive calls from the outer world you need at least: a provider -> a user/extension -> a phone

Spoken in terms of GS3 you need to configure at least in the web interface Menu choose ...

Routes for the Provider

configure a SIP gateway -> an entry in Gateway group -> check Inbound routes

Administration for adding an extension/user

configure a User -> physically connect and configure your phone

Outgoing calls

To make a call to the outer world you need to configure at least: a phone -> a user/extension -> a provider

Spoken in terms of GS3 you need to configure at least in the web interface menu choose ...

Routes for the provider (might be already done in the previous step)

configure a SIP gateway -> an entry in Gateway group -> check Routes & LCR

Administration for the extension/user (might be done in the previous step)

configure a User

Follow the wiki menu track ...


Wiki Top