Skip to content

Raspberry Pi library for interaction with a Amperka TroykaHAT.

License

Notifications You must be signed in to change notification settings

amperka/TroykaHatPython

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

25 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

TroykaHatPython

Raspberry Pi library for interaction with a Amperka TroykaHAT.

Enabled I²C Interface

If you haven’t enabled I²C support in your Raspbian Linux yet, open the terminal and run the following commands:

  1. Run sudo raspi-config.
  2. Use the down arrow to select Interfacing Options.
  3. Arrow down to I²C.
  4. Select <Yes> when it asks you to enable I²C.
  5. Press <Ok> when it tells you that I²C is enabled.
  6. Use the right arrow to select the <Finish> button.
  7. Reboot your Raspberry Pi to make the I²C interface appear.

After the reboot, log in and enter the following command:

$ ls /dev/i2c*

The Pi should respond with:

/dev/i2c-1

This means that the I²C is on.

Testing I²C Device Connection

For testing connection Troyka HAT board to Raspberry Pi, useful package I²C scanner.

Install the I²C scanner.

sudo apt-get install i2c-tools

Turn it on.

sudo i2cdetect -y 1

In response, Raspberry Pi will show the addresses of all connected I²C devices. Check if the 0x2A address is present.

Installation Library

Use pip to install the library:

pip3 install troykahat

Quickstart example

import troykahat
from time import sleep


# Constant for Pin 7 of Wiring PI IO.
# Connect an LED to this pin.
PIN_WP_LED = 7
# Constant for Pin 7 of Analog PI IO.
# Connect an LED to this pin.
PIN_AP_LED = 7


# Gives access to all the functions of GPIO, that are labeled "Wiring PI IO" on the HAT.
# Check WiringPI library API (https://github.com/WiringPi/WiringPi-Python)
# for the functions reference.
wp = troykahat.wiringpi_io()
# Gives access to all the functions of GPIO, that are labeled "Analog IO" on the HAT.
# Check API.md for the functions reference.
ap = troykahat.analog_io()
# Configures the LED pin of Wiring PI IO to an output mode.
wp.pinMode(PIN_WP_LED, wp.OUTPUT)
# Configures the LED pin of Analog IO to an output mode.
ap.pinMode(PIN_AP_LED, ap.OUTPUT)

while True:

    # Sets HIGH voltage level for the LED pin of Wiring PI IO.
    wp.digitalWrite(PIN_WP_LED, True)
    # Sets HIGH voltage level for the LED pin of Analog IO.
    ap.digitalWrite(PIN_AP_LED, True)
    # Wait 500 ms.
    sleep(0.5)
    # Sets HIGH voltage level for the LED pin of Wiring PI IO.
    wp.digitalWrite(PIN_WP_LED, False)
    # Sets HIGH voltage level for the LED pin of Analog IO.
    ap.digitalWrite(PIN_AP_LED, False)
    # Wait 500 ms.
    sleep(0.5)

See full API reference in API.md

About

Raspberry Pi library for interaction with a Amperka TroykaHAT.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •  

Languages