v2.17

Version 2.17 - 2019-09

• Update SAM9X60 header files to the latest version

New drivers/examples

• New example usb_printer_basic to demo a Generic/Text Only USB printer
• Add ddram configuration support for low_power_mode example
• Add SHA HMAC support
• Add support for LCDC Post Processing
• SAM-BA applets updated for sam9x60
• Add support for LPDDR MT46H16M32, SDRAM W9864G6KH

Fixes

• Fix the support for transmit un-aligned CAN buffers
• Fix USB VBus configuration for sam9x60
• Correct mutex implementation for ARMV7A and ARMV7M MPUs
• Fix error message for EMAC's MDC(Management Data Clock) configuration

Enhancements

• Remove sram configuration for examples which memory for code is too small
• Update documents for crypto_tdes/classd/can/low_power_mode examples
• Update documents for usart_iso7816/usart_irda/test-pio/usart/usb_cdc_serial/usb_uvc_isi examples
• Enable loop display effect on LCDC base layer in lcd example
• Launch gdb (on Windows) through a Unix adapter allows breaking into the program
• Update drivers for OTP

v2.16

Version 2.16 - 2019-07

• Update SAM9X60 header files to the latest version

New drivers/examples

• Add ISO7816, RS485, LIN, IrDA, SPI, OTP examples for SAM9X60 EK board
• Add AES GCM/XTS support for SAM9X60 & SAMA5D2
• Add support for DDR2 AD210032D, AD220032D, W9712G6KB and W9751G6KB

Fixes

• Match DMA security type with peripheral security type for SAMA5D2 and SAMA5D4
• Fix GMAC data bus width configuration for SAMA5D2 and SAMA5D4
• Fix the left/right channel settings for CLASSD
• Fix get_chip_name() for SAM9X60

Enhancements

• Improve DDRAM timings for W97GG6SB and EDF8164A3MA
• Add full test for TDES, SHA, AES examples
• Update PLL setting for SAM9X60

v2.15

Version 2.15 - 2019-01

New drivers/examples

• Add USB examples for SAM9X60 EK board (examples listed in softpack.md)
• Add RTT driver and example for SAM9X60 EK board
• Add Ethernet examples for SAM9X60 EK board
• Add FreeRTOS examples for SAM9X60 EK board
• Add some other examples for SAM9X60 EK board (CAN, low-power, clock, CLASSD, LCD, PWM, watchdog)
• Add support for LPDDR SDRAM

Fixes

• Fix pmecc_get_ecc_bytes_per_page() by wrong "+1" issue
• Fix JEDEC ID for sst25vg040b and sst25vg080b

Enhancements

• Improve DDRAM W972GG6KB-25 timings
• Add support to Microchip sst25vf020b
• Add system addresses of ROMs for PMECC tables to allow the 'nandflash' applet fitting once again into SRAM0