Sync chart packages and associated container images between chart repositories
- Usage
- Advanced Usage
- Configuration
- Requirements
- Changes performed in a chart
- How to build
- Deploy to Kubernetes
$ charts-syncer sync$ charts-syncer sync --from-date 2020-05-15$ charts-syncer sync --latest-version-onlyBy default, all container platforms are sync-ed to the destination registry, but this behavior can by tweaked by defining a list of platforms to sync:
#
# Example config file
#
source:
repo:
kind: OCI
url: http://localhost:8080
target:
# Container images registry authn
repo:
kind: OCI
url: http://localhost:9090/charts
containerPlatforms:
- linux/amd64
charts:
- redis
- mariadbIf your chart and docker images include artifacts such as signatures or metadata, they will be synced to the destination repository. If you want to disable this behavior, you can opt out by setting skipArtifacts to true:
source:
repo:
kind: OCI
url: http://localhost:8080
target:
repo:
kind: OCI
url: http://localhost:9090/charts
charts:
- redis
skipArtifacts: trueThis is especially useful when you filter the container platforms to sync, which would invalidate the signatures. Using skipArtifacts: true will prevent syncing the now invalid signatures:
source:
repo:
kind: OCI
url: http://localhost:8080
target:
repo:
kind: OCI
url: http://localhost:9090/charts
charts:
- redis
skipArtifacts: true
containerPlatforms:
- linux/amd64By default, charts-syncer syncs Helm Charts packages and their container images to the same registry specified in the target.repo.url property. If you require to configure a different destination registry for the images, this can be configured in the target.containers.url property:
#
# Example config file
#
source:
repo:
kind: OCI
url: http://localhost:8080
target:
# Container images registry authn
containers:
url: http://localhost:9090/containers
auth:
username: "USERNAME"
password: "PASSWORD"
repo:
kind: OCI
url: http://localhost:9090/charts
# Helm repository authentication
# auth:
# username: "USERNAME"
# password: "PASSWORD"
charts:
- redis
- mariadbThere are scenarios where the source and target Helm Charts repositories are not reachable at the same time from the same location.
For those cases, charts-syncer supports a two steps relocation for offline Chart and container images transport, check the air gap docs.
Below you can find an example configuration file. To know all the available configuration keys see the charts-syncer file as it includes explanatory comments for each configuration key.
#
# Example config file
#
source:
repo:
kind: HELM
url: http://localhost:8080
# Helm repository authentication, same for other repo types i.e OCI
# auth:
# username: "USERNAME"
# password: "PASSWORD"
# Container images registry authn
# containers:
# auth:
# registry: 'REGISTRY'
# username: "USERNAME"
# password: "PASSWORD"
target:
repo:
kind: OCI
url: http://localhost:9090
# Helm repository authentication
# auth:
# username: "USERNAME"
# password: "PASSWORD"
charts:
- redis
- mariadb
# opt-out counterpart of "charts" property that explicit list the Helm charts to be skipped
# either "charts" or "skipCharts" can be used at once
# skipCharts:
# - mariadbNote that the
repo.urlproperty you need to specify is the same one you would use to add the repo to helm with thehelm repo add command.Example:
helm repo add bitnami https://charts.bitnami.com/bitnami.
Credentials for the Helm Chart repositories and container images registries can be provided using config file or the following environment variables:
Helm Chart repositories
-
SOURCE_REPO_AUTH_USERNAME -
SOURCE_REPO_AUTH_PASSWORD -
TARGET_REPO_AUTH_USERNAME -
TARGET_REPO_AUTH_PASSWORD
Container images registries
-
SOURCE_CONTAINERS_AUTH_REGISTRY -
SOURCE_CONTAINERS_AUTH_USERNAME -
SOURCE_CONTAINERS_AUTH_PASSWORD -
TARGET_CONTAINERS_AUTH_USERNAME -
TARGET_CONTAINERS_AUTH_PASSWORD
Current available Kinds are LOCAL, HELM, CHARTMUSEUM, HARBOR and OCI for the Source Repo and OCI and LOCAL for the Target Repo.
The list of charts in the config file is optional except for OCI repositories used as source. The rest of chart repositories kinds already support autodiscovery.
The Google Artifact Registry (GAR) is the default option for Tanzu Application Catalog hosted registries.
Tanzu Application Catalog provides the JSON file with the credentials. The recommended option for chart-syncer configuration is to use the base64 approach. For the commands below it is required to have jq tool installed.
$ cat _json_key.json | base64The username is _json_key_base64 and the password is the output of the previous command.
If you need to log in to a registry, this command is also useful:
$ cat _json_key.json | docker login -u _json_key --password-stdin https://YOUR_REGISTRYSee below an example of configuration file using GAR and Debian 12 Helm charts and containers:
source:
repo:
kind: OCI
url: https://us-east1-docker.pkg.dev/vmw-app-catalog/hosted-registry-YOUR_ID/charts/debian-12
auth:
username: _json_key_base64
password: PASSWORD_BASE64
containers:
auth:
registry: https://us-east1-docker.pkg.dev/vmw-app-catalog/hosted-registry-YOUR_ID/containers/debian-12
username: _json_key_base64
password: PASSWORD_BASE64
target:
repo:
kind: OCI
url: https://YOUR_REGISTRY/tac-charts
auth:
username: ${TARGET_REPO_AUTH_USERNAME} # Username for target repo authentication
password: ${TARGET_REPO_AUTH_PASSWORD} # Password for target repo authentication
In the case of HARBOR kind repos, be aware that chart repository URLs are:
https://$HARBOR_DOMAIN/chartrepo/$HARBOR_PROJECT
So if HARBOR_DOMAIN=my.harbor.com and HARBOR_PROJECT=my-project, you would need to specify this repo in the config file like:
source:
repo:
kind: HARBOR
url: https://my.harbor.com/chartrepo/my-projectSince Harbor 2.0.0, there are two ways of storing charts. The legacy one uses chartmuseum under the hood and it corresponds to the HARBOR kind of this project. The new one however uses OCI to store helm charts as OCI artifacts. In case you are using Harbor with OCI backend you can use the following example:
target:
repo:
kind: OCI
url: https://my.harbor.com/my-project/subpathsubpath in the previous url is optional in case your charts are not stored directly under your projects.
It is worth mentioning that you can use Harbor robot accounts using OCI registries as source or target.
Also, take into account that if you use OCI as the source repository you must specify the list of charts to synchronize or a pointer to a charts index file in the repository.
By using a charts index file for OCI-Based repository you won't need to maintain a hardcoded list of chart names in the config file. charts-syncer will be able to auto-discover what charts need to be synchronized.
By default, the library will look up for a "charts-index:latest" charts index artifact within the source OCI repository.
However, this can be customized using the chartsIndex field using the format REGISTRY/PROJECT/[SUBPATH][:TAG|@sha256:DIGEST].
For example, if your URL is https://my-oci-registry.io/my-project/subpath and no chartsIndex is specified, charts-syncer will try to use
my-oci-registry.io/my-project/subpath/charts-index:latest asset as index if it exists.
An example of the valid index format can be seen directly in its Protobuf definition. Worth to mention that the format of the charts index for OCI repositories is a custom one, not a traditional Helm index file.
source:
repo:
kind: OCI
url: https://my-oci-registry.io/my-project/subpath
# disableChartsIndex: true
# Charts index location override, charts-index:latest by default
chartsIndex: my-oci-registry.io/my-project/my-custom-index:prodFinally, if no charts index is found, charts-syncer will require the list of charts in the config file:
source:
repo:
kind: OCI
url: https://my-oci-registry.io/my-project/subpath
...
# Required if no index is provided or found
charts:
- redis
- mariadb
- ...Amazon Elastic Container Registry (ECR) is an OCI registry, but it has two peculiarities that should be taken into account when interacting with charts-syncer.
The first peculiarity relates to authentication, usually you would have an IAM user with access_key_id and secret_access_key credentials. These are not the credentials that should be entered in the config file. To obtain the proper credentials, you need to obtain a temporary password to operate the ECR registry. By using the following command, you can get the password:
$ aws ecr get-login-password --region REGIONIn the previous command remember to update the REGION placeholder by a proper value.
The username will always be AWS.
The second peculiarity only affects when using ECR as a target registry since you need to create the repositories in advance. If the repositories don't exist when executing charts-syncer you will get an error like the following:
failed to do request: Post "https://AWS_ACCOUNT.dkr.ecr.AWS_REGION.amazonaws.com/v2/charts-syncer-test/charts/common/blobs/uploads/": EOF
failed to do request: Post "https://AWS_ACCOUNT.dkr.ecr.AWS_REGION.amazonaws.com/v2/charts-syncer-test/charts/apache/blobs/uploads/": EOF
failed to do request: Post "https://AWS_ACCOUNT.dkr.ecr.AWS_REGION.amazonaws.com/v2/charts-syncer-test/charts/mariadb/blobs/uploads/": EOF
failed to do request: Post "https://AWS_ACCOUNT.dkr.ecr.AWS_REGION.amazonaws.com/v2/charts-syncer-test/charts/mysql/blobs/uploads/": EOF
failed to do request: Post "https://AWS_ACCOUNT.dkr.ecr.AWS_REGION.amazonaws.com/v2/charts-syncer-test/charts/redis/blobs/uploads/": EOF
In that case make sure all the missing repositories are created before executing charts-syner again. Please refer to AWS documentation to see how to do it.
In case charts-syncer is not able to directly push the modified charts to the desired target, it would be possible to sync the charts to a local folder using the LOCAL target kind and then use any other tool or process to upload these charts to the final charts repository.
target:
repo:
kind: LOCAL
path: your_local_pathIn order for this tool to be able to successfully migrate a chart from a source repository to another it must fulfill the following requirements:
- The images used by the chart must be specified in the following way in the values.yaml file:
image:
registry: docker.io
repository: bitnami/ghost
tag: 3.22.2-debian-10-r0The parent section name does not matter. In the previous example, instead of image it could be mainImage or whatever other name.
The important thing is that the image name is specified with registry, repository and tag.
The values of the parameters containerRegistry and containerRepositories from the configuration file will be used to update the registry and repository properties in the values.yaml. If these parameters are unset, the associated properties won't be modified. The tag property remains unchanged.
⚠️ Be aware that this tool expects the images to be already present in the target container registry.
In order to migrate a chart from one repository to another and retrieve the images from a new container registry, this tool performs the following changes in the chart code:
This file is updated with the new container registry where the chart should pull the images from.
This file will get its images annotation rewritten to point to the new relocated container images.
If present, the Images.lock will be relocated to point to the new container images.
If the file does not exist, it will be created.
Let's see the performed changes with an example. Imagine I sync the Ghost chart from the Bitnami chart repo to a local chartmuseum repo with no authentication.
I would use this config file:
source:
repo:
kind: HELM
url: https://charts.bitnami.com/bitnami
target:
repo:
kind: OCI
url: http://localhost:8080After executing the tool, these are the changes performed to the following files:
diff --git a/values.yaml b/values.yaml
index dff53b1..a9d5884 100755
--- a/values.yaml
+++ b/values.yaml
@@ -68,8 +68,8 @@
## @param image.debug Enable image debug mode
##
image:
- registry: docker.io
- repository: bitnami/ghost
+ registry: localhost:80
+ repository: library/bitnami/ghost
tag: 5.79.4-debian-12-r2
digest: ""
## Specify a imagePullPolicy
@@ -608,8 +608,8 @@
## @param volumePermissions.image.pullSecrets OS Shell + Utility image pull secrets
##
image:
- registry: docker.io
- repository: bitnami/os-shell
+ registry: localhost:80
+ repository: library/bitnami/os-shell
tag: 12-debian-12-r15
digest: ""
pullPolicy: IfNotPresentdiff --git a/Chart.yaml b/Chart.yaml
--- a/Chart.yaml
+++ b/Chart.yaml
@@ -2,9 +2,9 @@
category: CMS
images: |
- name: ghost
- image: docker.io/bitnami/ghost:5.79.4-debian-12-r2
+ image: localhost:80/library/bitnami/ghost:5.79.4-debian-12-r2
- name: os-shell
- image: docker.io/bitnami/os-shell:12-debian-12-r15
+ image: localhost:80/library/bitnami/os-shell:12-debian-12-r15
licenses: Apache-2.0
apiVersion: v2
appVersion: 5.79.4--- /dev/null 2024-02-23 14:30:30
+++ b/Images.lock 2024-02-22 10:51:59
@@ -0,0 +1,50 @@
+apiVersion: v0
+kind: ImagesLock
+metadata:
+ generatedAt: "2024-02-22T09:46:03.681760496Z"
+ generatedBy: Distribution Tooling for Helm
+chart:
+ name: ghost
+ version: 19.10.2
+ appVersion: 5.79.4
+images:
+- name: ghost
+ image: localhost:80/library/bitnami/ghost:5.79.4-debian-12-r2
+ chart: ghost
+ digests:
+ - digest: sha256:950c0bcbdcd9e97fb6db96c70cde4408ab30e658e5568445f4a1a9734cc9cc68
+ arch: linux/amd64
+ - digest: sha256:c7ba15d98097bc06baf80091fba8f0b0c2a05fd4d94f3bec4ea4c92c3202e3b6
+ arch: linux/arm64
+- name: os-shell
+ image: localhost:80/library/bitnami/os-shell:12-debian-12-r15
+ chart: ghost
+ digests:
+ - digest: sha256:fbb2bf7afc15ff68e89b36c24cf3210a47729246f1943db056ae3c9a0c2f278d
+ arch: linux/amd64
+ - digest: sha256:051cc71e48d8d901f2958e3f323977964c2373a153a9e2b6183c3dbd2cd2075c
+ arch: linux/arm64
+- name: mysql
+ image: localhost:80/library/bitnami/mysql:8.0.36-debian-12-r7
+ chart: mysql
+ digests:
+ - digest: sha256:af4f8a296ed5081a5c91d262f06c897ac956714009a71192ee36b22742f23b9d
+ arch: linux/amd64
+ - digest: sha256:1b15bdfd66ad9acc14a6a81d570c39eb607e53a73242f13e91d63c64496b2b2f
+ arch: linux/arm64
+- name: mysqld-exporter
+ image: localhost:80/library/bitnami/mysqld-exporter:0.15.1-debian-12-r7
+ chart: mysql
+ digests:
+ - digest: sha256:cc417c3577774bd439bc8cef6aeced1ef1019192964b763116072fafad16b73a
+ arch: linux/amd64
+ - digest: sha256:81ead00a80c63f562ff028c3fc2772354f8354085fe0ffb5ba29b04f6d4a2f4a
+ arch: linux/arm64
+- name: os-shell
+ image: localhost:80/library/bitnami/os-shell:12-debian-12-r15
+ chart: mysql
+ digests:
+ - digest: sha256:fbb2bf7afc15ff68e89b36c24cf3210a47729246f1943db056ae3c9a0c2f278d
+ arch: linux/amd64
+ - digest: sha256:051cc71e48d8d901f2958e3f323977964c2373a153a9e2b6183c3dbd2cd2075c
+ arch: linux/arm64Visit this guide to deploy a Kubernetes CronJob that will keep two Helm Chart repositories synced.
Check the developer docs.
Copyright © 2024 Broadcom. The term "Broadcom" refers to Broadcom Inc. and/or its subsidiaries.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.