Skip to content

Armstart's CMSIS-DAP firmware implementation in gcc and makefile. Note: this is not the original Armstart repo

License

Notifications You must be signed in to change notification settings

devanlai/IBDAP-CMSIS-DAP

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

5 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

IBDAP-CMSIS-DAP

Armstart's CMSIS-DAP firmware implementation in gcc and makefile.

http://www.armstart.com

IBDAP is a fully CMSIS-DAP compatible debug adapter. It provides vendor independent debug interface between your PC over USB and target ARM device over JTAG/SWD pins. You can do debugging functions like stepping, breakpoints, watch points and firmware download etc. It's fully supported by Keil, OpenOCD, GNU GDB, IAR and other commonly used debugging tools.

Why IBDAP?

Debug adapters are expensive, some could cost thousands of dollars, some may not be compatible among different vendors. Luckily, ARM standardized the debugging interface which is called CMSIS-DAP and released the firmware implementation on some processors, however, you still need a Keil MDK Professional edition software in order to build the firmware, even the open source one provided by mbed and the price for Keil Professional is intimidating. All these barriers has become the first issue that every inventor is facing, and we need a solution! IBDAP's objective is to become an affordable open source & open hardware CMSIS-DAP JTAG/SWD debug probe implementation using gcc & makefile. Anyone can modify and embed a debug probe on its own device easily with everything under its control.

Besides being functioning as a JTAG/SWD debug probe, IBDAP could also be used as a general development board. It has an ARM Cortex M0 processor running at 48Mhz and has peripherals like UART, I2C, SPI, USB. It can be used in many applications like USB audio devices, USB mouse/keyboards, USB mass storage devices, USB-TTL adapter device and many many more. Moreover, the 10-bit high precision ADC peripheral also makes IBDAP an ideal device for any sensor projects.

IBDAP pinmap

OpenOCD Tutorial

install deps

sudo apt-get install build-essential

sudo apt-get install autotools-dev autoconf automake libtool

sudo apt-get install texinfo libudev-dev libusb-1.0-0-dev libfox-1.6-dev

Download FTDI driver

http://www.intra2net.com/en/developer/libftdi/download.php
tar xf libftdi1-1.2.tar.bz2

HIDAPI

git clone git://github.com/signal11/hidapi.git
./bootstrap
./configure
make
sudo make install

Build and Install OpenOCD

git clone git://git.code.sf.net/p/openocd/code
cd code
./bootstrap
cd ../
mkdir ./openocd-build
cd openocd-build
../code/configure --with-ftd2xx-linux-tardir=../libftdi1-1.2 --prefix=/opt/openocd --enable-jlink --enable-ftdi --enable-stlink --enable-ti-icdi --enable-ulink --enable-usb-blaster-2 --enable-cmsis-dap --enable-bcm2835gpio
make
make install

Usage

Prepare extra OpenOCD cfg commands

create file openocd.cfg with following contents:

$_TARGETNAME configure -event gdb-attach {
   echo "Halting target"
   halt
}

Start OpenOCD server to Debug LPC11U35

sudo openocd -f interface/jlink.cfg -c "transport select swd" -f target/lpc11xx.cfg -f openocd.cfg 

Flash and Debug

  • First, flash debug firmware on board
telnet localhost 4444
reset halt
flash probe 0
flash write_image erase /home/yliu/projects/ib51822/IBDAP-FW/Firmware/IBDAP/Debug/IBDAP.bin 0x0
reset
exit
  • Second, debug using the commands:
target remote localhost:3333
break IBDAP.c:103
monitor reset halt
monitor reset init
continue

http://wiki.paparazziuav.org/wiki/DevGuide/GDB_OpenOCD_Debug

Breakpoint limits

set remote hardware-breakpoint-limit 4
set remote hardware-watchpoint-limit 2

gdbtui GUI debugging

http://fun-tech.se/stm32/OpenOCD/gdb.php

OpenOCD nRF51822 using IBDAP

Launch OpenOCD

$ sudo openocd -f interface/cmsis-dap.cfg -c "transport select swd" -f target/nrf51.cfg

nrf OpenOCD log

yliu@yliu-xbtu:~$ 
yliu@yliu-xbtu:~$ sudo openocd -f interface/cmsis-dap.cfg -c "transport select swd" -f target/nrf51.cfg
[sudo] password for yliu: 
Open On-Chip Debugger 0.10.0-dev-00001-g70a14db (2015-06-23-16:35)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'swd'
Warn : Transport "swd" was already selected
swd
cortex_m reset_config sysresetreq
adapter speed: 1000 kHz
Info : CMSIS-DAP: SWD  Supported
Info : CMSIS-DAP: JTAG Supported
Info : CMSIS-DAP: Interface Initialised (SWD)
Info : CMSIS-DAP: FW Version = 1.0
Info : SWCLK/TCK = 1 SWDIO/TMS = 1 TDI = 1 TDO = 1 nTRST = 0 nRESET = 1
Info : CMSIS-DAP: Interface ready
Info : clock speed 1000 kHz
Info : SWD IDCODE 0x0bb11477
Info : nrf51.cpu: hardware has 4 breakpoints, 2 watchpoints
Info : accepting 'telnet' connection on tcp/4444
yliu@yliu-xbtu:~$ telnet localhost 4444
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Open On-Chip Debugger
> reset halt
target state: halted
target halted due to debug-request, current mode: Thread 
xPSR: 0xc1000000 pc: 0x000006d0 msp: 0x000007c0
> flash probe 0
Unknown device (HWID 0x00000057)
flash 'nrf51' found at 0x00000000

About

Armstart's CMSIS-DAP firmware implementation in gcc and makefile. Note: this is not the original Armstart repo

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published