Skip to content

Bootstrap the xilinx zynq toolchain. Just plug the device in, run the scrip and everything will take care of itself. ;)

Notifications You must be signed in to change notification settings

fakedrake/xilinx-zynq-bootstrap

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

TL;DR

User facing targets

Building/rebuilding stuff

  • board-ready build everything
  • linux-rebuild
  • {tlcdml,think2d}-build
  • nfsroot
  • sdcard

Board manipulation (over serial):

  • device-{reload,reset}
  • minicom
  • xmd-shell
  • show-xmd-commands

Usage

Building for Zynq

To bootstrap the sw stack for a zynq board you first need to build everything with

make board-ready

This one pulls linux and uboot and other stuff and builds a ramdisk etc so make some coffee, it is going to take a while.

Note: You will need root at some point to set uid to 0 for some files in the ramdisk.

Load linux on device

To load everything you built on your board, connect your board to your computer (make sure you have xmd though) and use the load-linux.sh script.

For example:

./load-linux.sh

To just load everything through xmd and then fire up a serial connection via minicom.

Use --help for other options.

Remote build

In the special case that you are working on a mounted filesystem and the absolute paths of your machine match the absolute paths in an ssh accessible faster machine you can use the REMOTE_SERVER variable. For example:

make board-ready REMOTE_SERVER=192.168.1.27

or even

make board-ready REMOTE_SERVER=me@fastserver

Threads

To compile directfb with 4 threads do.

make MAKETHREADS=4 dfb-all

This converts all calls to make into make -j4.

Cleanup

For archives you can run for exaple:

make libpng-clean-archive

To remove all traces of libpng (except from the filesystem)

DirectFB

To build everything run

make dfb-all

Nfsroot

You need to setup the NFS server on the host side yourself. Usually you can do that by installing the nfs server and then fixing up \/etc\/exports to have a line similar to this.

/srv/nfs *(rw,no_subtree_check,no_root_squash,insecure)

if you change the /srv/nfs path you will have to also set the NFS_ROOT variable.

Then set up the boot arguments of linux to something like this

console=ttyPS0,115200n8 root=/dev/nfs rw nfsroot=192.168.1.22:/srv/nfs rw  earlyprintk ip=:::::eth0:dhcp

You can do this by editing the dts you are using (DTS_TREE variable) or by passing the --bootargs <bootargs> to load-linux.sh.

Debug

You may run debug.sh <program-in-bin> to debug something running on the board’s gdbserver.

From the board look for dbi.sh <program to debug> if you cant bother to look into gdb server.

Lazy

The problem when a makefile compiles a couple of other projects is that ./configure will always run and may take quite some time when phony targets are being run. So each target target-name-build has an enquivalent target-name-lazy which will run target-name-build if there is not token file in lazy/ and then create such a file. This way we can avoid configuring things like libjpeg again and again.

For example:

make linux-lazy

will run make linux-build and then it will create a file. If we try to run again make linux-lazy it will just skip it.

make linux-clean-lazy

cleans the created files by lazy

make all-clean-lazy

clears all laziness.

If you are sure you have run linux-build or for any reason you want to prevent a lazy from actually doing anything you can run.

make linux-shallow-lazy

to create the lazy file without building (again)

Hardware

SD Card usage

To use the sd card loaded stuff the switches must be:

12345
DownDownUpUpDown

JTAG usage

To load linux from the jtag you must have all switches down

12345
DownDownDownDownDown

For ZC702 you also need to setup SW10

JTAG ModeSwitch 0Switch 1
Invalidoffoff
Digilent USB JTAGoffon
Xilinx Platform Cableonoff
20-pin Headeroffoff

Load Linux script

To interact with a board you should use the load-linux.sh script. It is becoming more and more sophisticated and can cover more than a couple of cases. I can’t hope to have documentation up to date with it as it grows and changes very very fast. Check the swtch case at the end of the file to see what you can do.

Notes

MODULEDIR is absolute for host.

About

Bootstrap the xilinx zynq toolchain. Just plug the device in, run the scrip and everything will take care of itself. ;)

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published