Skip to content

Getting Started

Andrew Gillis edited this page Dec 2, 2020 · 8 revisions

To get started using nexus as a stand-alone service, without writing any code, follow these steps:

  1. Install the nexus package.
  2. Build nexusd, the nexus router service.
  3. Configure nexusd by editing the configuration file, if needed.
  4. Run the nexusd router service.

Install the nexus package

git clone git@github.com:gammazero/nexus.git

Build the Router

cd nexus/nexusd/
make build

Configure the Router

Edit the file nexusd/etc/nexus.json to configure the router. This is a JSON file that specifies settings for a router and for the realms within that router. It is not necessary to include items that have an empty, 0, or false value. They are included in the default config so that you are aware of their presence. The default config file looks like this:

{
    "websocket": {
        "address": ":8080",
        "cert_file": "",
        "key_file": "",
        "enable_compression": false,
        "allow_origins": []
    },
    "rawsocket": {
        "tcp_address": "",
        "tcp_keepalive_interval": 180,
        "unix_address": "",
        "max_msg_len": 0,
        "cert_file": "",
        "key_file": ""
    },
    "log_path": "",
    "router": {
        "realms": [
            {
                "uri": "nexus.realm1",
                "strict_uri": false,
                "allow_disclose": true,
                "anonymous_auth": true,
                "meta_strict": false,
                "meta_include_session_details": [],
                "enable_meta_kill": false,
                "enable_meta_modify": false
            }
        ],
        "debug": false
    }
}

If log_path is not specified or is "", then nexusd will log to stdout.

Automatic creation of realms is enabled by specifying a realm_template in the config file. This means that when a client joins a realm, that the realm is automatically created within the router if it does not already exist. Here is an example realm template config:

{
    ...
    "router": {
        "realm_template": {
            "anonymous_auth": true,
            "allow_disclose": true
        },          
    }
}

Run the Router

./nexusd

If the config file is not in ./etc/nexus.json, then use the -c flag and give a path to the config file:

./nexusd -c /path/to/conf/nexusd.conf

Configuration Details

The configuration file is loaded into the following structure:

type Config struct {
    // Websocket configuration parameters.                                      
    WebSocket struct {
        // String form of address (example, "192.0.2.1:25", "[2001:db8::1]:80")
        Address string `json:"address"`
        // Files containing a certificate and matching private key.             
        CertFile string `json:"cert_file"`
        KeyFile  string `json:"key_file"`
        // Heartbeat ("pings") interval in seconds.  Set to 0 to disable.       
        KeepAlive time.Duration `json:"keep_alive"`                             
        // Enable per message write compression.                                
        EnableCompression    bool `json:"enable_compression"`
        // Enable sending cookie to identify client in later connections.       
        EnableTrackingCookie bool `json:"enable_tracking_cookie"`
        // Enable reading HTTP header from client requests.                     
        EnableRequestCapture bool `json:"enable_request_capture"`
        // Allow origins that match these glob patterns when an origin header   
        // is present in the websocket upgrade request.                         
        AllowOrigins []string `json:"allow_origins"`
        // Limit on number of pending messages to send to each client.          
        OutQueueSize int `json:"out_queue_size"`                                
    }

    // RawSocket configuration parameters.                                      
    RawSocket struct {
        // String form of address (example, "192.0.2.1:25", "[2001:db8::1]:80")
        TCPAddress string `json:"tcp_address"`
        // TCP keepalive interval in seconds.  Set to 0 to disable.             
        TCPKeepAliveInterval time.Duration `json:"tcp_keepalive_interval"`
        // Path to Unix domain socket.                                          
        UnixAddress string `json:"unix_address"`
        // Maximum message length server can receive. Default = 16M.            
        MaxMsgLen int `json:"max_msg_len"`
        // Files containing a certificate and matching private key.             
        CertFile string `json:"cert_file"`
        KeyFile  string `json:"key_file"`
        // Limit on number of pending messages to send to each client.          
        OutQueueSize int `json:"out_queue_size"`                                
    }

    // File to write log data to.  If not specified, log to stdout.             
    LogPath string `json:"log_path"`
    // Router configuration parameters.                                         
    // See https://godoc.org/github.com/gammazero/nexus#RouterConfig            
    Router router.Config
}

Note: All boolean values default to false if not specified.

Within the "router" section of the config, the value "realms" is a list of realms to be configured on the router. Each realm in the list has the form:

{
    "uri": string,
    "strict_uri": boolean,
    "allow_disclose": boolean,
    "anonymous_auth": boolean,
    "meta_strict": boolean,
    "meta_include_session_details": [string, ..],
    "enable_meta_kill": boolean,
    "enable_meta_modify": boolean
}

Documentation of these options is in the godoc reference for RealmConfig