Skip to content

Commit

Permalink
hpm sdk release v1.4.0
Browse files Browse the repository at this point in the history 
Main changes since 1.3.0

Tested Segger Embedded Studio Version: 7.32

- Changed:
  - soc: hpm5301: add hpm5301
  - soc: hpm6880: add hpm6880
  - soc: HPM6750: pcfg: update dcdc dcm mode config
  - soc: clock driver: update clock_set_source_divider() and clock_get_source()
  - boards: add hpm5301evklite
  - boards: add hpm6800evk
  - boards: update clock_set_source_divider() to use clk_src_t type param
  - boards: hpm6750evkmini: use the same uart port as core1 for some samples.
  - drivers: dao: update driver support new feature on hpm6800
  - drivers: adc16: update comment about cal_avg_cfg in calibration
  - drivers: qeiv2: change adc trigmux name x to 0 and y to 1
  - drivers: femc: add overflow protect to time config
  - drivers: mcan Enlarge the range of CAN_EVENT_ERROR.
  - components: serial_nor: add subdirectory in cmakelists
  - middleware: cherryusb: update to v0.10.2
  - middleware: cherryusb: rename host and device isr
  - middleware: FreeRTOS: xPortIsInsideInterrupt() using CSR_MSCRATCH
  - middleware:hpm_sdmmc Enhanced all speed modes support for SD and eMMC.
  - middleware: usbx: device: support chain transfer
  - samples: cherryusb: host: rndis: integrate dhcp thread into ping thread for host rndis ping and iperf sample
  - samples: adc: temp: add isr for temp out of thresholds
  - samples: drivers: acmp: optimization for comparing input voltage
  - samples: lwip: add DHCP macro definition in CMakeLists.txt
  - samples: lwip_ptp: enable DHCP feature in PTP samples
  - samples: drivers: qeiv2: update API for adc-qeiv2 pin initialization
  - samples: bldc_foc: change adc buffer size from 40 words to 48 words
  - samples: remove explicitly c++ standard setting.
  - samples: driver: cam: set default cmake build type
  - samples: lwip: update to Class C static IP adress
  - samples: tinyuf2: remove unnecessary cache ops.
  - samples: lwip: lwip_tcpecho_freertos: optimization for API call in a thread-safe way
  - samples: lwip: lwip_ptp: v1: slave: update static ip
  - samples: lwip: optimize DHCP enable logic
  - samples: lwip: opts: adjust the allocation strategy of memory pool
  - samples: lwip: lwip_iperf: adjust MEM_SIZE for saving memory consumption
  - samples: lwip: lwip_tcpecho_multi_ports: update the second IP with C class
  - samples: enet: optimization for PHY selections
  - samples: dma: update uart rx circle transfer buffer size
  - samples: drivers: sdxc/emmc Correct doc for emmc sample.
  - cmake: sdk_link_libraries link libraries for supported tools.
  - cmake: add project name for hpm_sdk sub directory.
  - cmake: decouple CMAKE_BUILD_TYPE and linker script.
  - cmake: ses: remove -Ox from gcc option list.
  - cmake: set default c++ standard to c++11.
  - Update CONFIG_HAS_xxx to HPMSOC_HAS_xxx.
  - segger: enable all warnings.
  - segger: release: release optimization level use cmakelist config
  - scripts: ses: set intermediate dir in project file.
  - docs: remove quick start guide from top level readme
  - docs: change doc structure.

- Added:
  - soc: HPM5361: add trgm filter shift length feature
  - soc & drivers: hpm5300: add DMAMUX_SOC_WRITEONLY and TRGM_SOC_HAS_DMAMUX_EN features
  - drivers: lcb: add lcb driver.
  - drivers: sdxc add more APIs for timing and power control.
  - drivers: mipi_csi: add mipi csi.
  - drivers: cam: add cam_stop_safely API
  - components: usb: device: add dtd chain transfer
  - components: panel: enable panel component.
  - components: camera: ov5640: add mipi interface.
  - middleware: rtthread-nano: add v3.1.5
  - middleware: rtthread-nano: add FPU support.
  - middleware: tinyusb: device: update to support chain transfer
  - middleware: cherryusb: device: update to support chain transfer
  - middleware: vglite: add 4.0.49.
  - middleware: cherryusb: add USB_OSAL_WAITING_FOREVER for sem and mq use
  - middleware: add hpm_mcl_v2
  - middleware: lwip: add ptpd v1 & v2
  - middleware: cmsis_os2: add source files.
  - samples: mcl: add step motor.
  - samples: lwip: lwip_ptp: v2: support IEEE1588 V2
  - samples: cherryusb: add audio_v2_mic_speaker_rtthread sample
  - samples: cherryusb: host: add hid and msc rtthread samples
  - samples: cherryusb: host: usbnet: add support ec20 module sample.
  - samples: cmsis_os2: add blinky sample.
  - samples: driver: mipi_csi: add mipi_csi.
  - samples: mcan Support MCAN4-7 loopback testing.
  - cmake: support custom output file name.

- Fixed:
  - soc: fix cache maintenance at startup
  - soc: hpm53xx Correct exip API tree offset.
  - soc: toolchain: missing .fast.* in gnu ld linker script.
  - soc: fix tbss and tdata section not initialized.
  - soc: sysctl: sysctl_enable_group_resource() should be check LOC_BUSY
  - soc: hpm5300 Correct Cache size and Cacheline size.
  - boards: hpm6750evkmini Fix the issue that eMMC is still 3.3V even 1.8V is selected.
  - boards: hpm5301evklite correct jlink script device number.
  - components: camera: power_up is enable by default for ov5640/ov7725.
  - docs: samples: drivers: add numberic index.
  - drivers/soc: fix build warning
  - drivers: i2c: add slave device response judgment for master read/write APIs
  - drivers: opamp: fix opamp vssa connect error.
  - drivers: pllv2: fix pllctlv2_pll_is_stable() API
  - drivers: qeiv2: fix invalid argument check
  - drivers: dac: fix the upper limit value setting for DAC_OUTPUT
  - drivers: jpeg: fix pixel format index for out buffer.
  - drivers: uart: fix not support oversample 32 for rx idle detection on hpm5300
  - middleware:ftafs Fix SD card init crash.
  - middleware: mcl: fix path plan error.
  - middleware: hpm_sdmmc Fix the issue that IO initialization work unstable on HPM6300.
  - middleware: hpm_sdmmc Fix voltage switch setting issue for SD and eMMC.
  - middleware: hpm_sdmmc Fix the PWR and VSEL IO initiaization issue. refs:hpm-sdk-#863
  - samples: sei: fix nikon sample crc calc error.
  - samples: cherryusb: msc device: add pre-format fat12 file system in u disk
  - samples: adcx: replace const with a macro for ADC sample cycle
  - samples: tinyusb:fix the usb host pin init.
  - samples: motor_ctrl: bldc_littlevgl_foc: program crash.
  - samples: qeiv2: uvw: fix uninitialized pointer usage
  - samples: cherryusb: fix semaphore give in isr
  - samples: drivers: Fix the issue that can error example may block.
  - samples: uart_irq: fix unable to limit receive large than buffer size.
  - samples: drivers:sdxc:emmc remove infinite loop for emmc initialization.
  - samples: drivers: i2s: fix tx underflow during tx start
  - samples: lwip: lwip_tcpecho_multiple_ports: fix no echo data when receiving large amounts of data
  - samples: mcl: pwm duty set error.
  - samples: cherryusb: host: usbnet: fixed when performing a stress test with a large amount of iperf data, will send fai.
  - samples: cherryusb: audio_v2_mic_speaker_rtthread: fix mic no voice problem
  - samples: jpeg_decode: add delay after usb pins init for waiting power stable
  - samples: hfi: hpm6750evk2: fix the motor shake.
  - cmake: segger: remove workstation specific path info.
  - cmake/soc: fix heap/stack size setting for andes toolchain.
  - cmake: ses: correct device name for core1.

Signed-off-by: Ryan QIAN <jianghao.qian@hpmicro.com>
  • Loading branch information
@jhqian
jhqian committed Dec 28, 2023
1 parent b612c6f commit 637c4be
Show file tree
Hide file tree
Showing 2,208 changed files with 336,402 additions and 27,724 deletions.
132 changes: 132 additions & 0 deletions CHANGELOG.md
View file
Original file line number Diff line number Diff line change
@@ -1,5 +1,137 @@
# Change Log

## [1.4.0] - 2023-12-29:

Main changes since 1.3.0

Tested Segger Embedded Studio Version: 7.32

### Changed:
- soc: hpm5301: add hpm5301
- soc: hpm6880: add hpm6880
- soc: HPM6750: pcfg: update dcdc dcm mode config
- soc: clock driver: update clock_set_source_divider() and clock_get_source()
- boards: add hpm5301evklite
- boards: add hpm6800evk
- boards: update clock_set_source_divider() to use clk_src_t type param
- boards: hpm6750evkmini: use the same uart port as core1 for some samples.
- drivers: dao: update driver support new feature on hpm6800
- drivers: adc16: update comment about cal_avg_cfg in calibration
- drivers: qeiv2: change adc trigmux name x to 0 and y to 1
- drivers: femc: add overflow protect to time config
- drivers: mcan Enlarge the range of CAN_EVENT_ERROR.
- components: serial_nor: add subdirectory in cmakelists
- middleware: cherryusb: update to v0.10.2
- middleware: cherryusb: rename host and device isr
- middleware: FreeRTOS: xPortIsInsideInterrupt() using CSR_MSCRATCH
- middleware:hpm_sdmmc Enhanced all speed modes support for SD and eMMC.
- middleware: usbx: device: support chain transfer
- samples: cherryusb: host: rndis: integrate dhcp thread into ping thread for host rndis ping and iperf sample
- samples: adc: temp: add isr for temp out of thresholds
- samples: drivers: acmp: optimization for comparing input voltage
- samples: lwip: add DHCP macro definition in CMakeLists.txt
- samples: lwip_ptp: enable DHCP feature in PTP samples
- samples: drivers: qeiv2: update API for adc-qeiv2 pin initialization
- samples: bldc_foc: change adc buffer size from 40 words to 48 words
- samples: remove explicitly c++ standard setting.
- samples: driver: cam: set default cmake build type
- samples: lwip: update to Class C static IP adress
- samples: tinyuf2: remove unnecessary cache ops.
- samples: lwip: lwip_tcpecho_freertos: optimization for API call in a thread-safe way
- samples: lwip: lwip_ptp: v1: slave: update static ip
- samples: lwip: optimize DHCP enable logic
- samples: lwip: opts: adjust the allocation strategy of memory pool
- samples: lwip: lwip_iperf: adjust MEM_SIZE for saving memory consumption
- samples: lwip: lwip_tcpecho_multi_ports: update the second IP with C class
- samples: enet: optimization for PHY selections
- samples: dma: update uart rx circle transfer buffer size
- samples: drivers: sdxc/emmc Correct doc for emmc sample.
- cmake: sdk_link_libraries link libraries for supported tools.
- cmake: add project name for hpm_sdk sub directory.
- cmake: decouple CMAKE_BUILD_TYPE and linker script.
- cmake: ses: remove -Ox from gcc option list.
- cmake: set default c++ standard to c++11.
- Update CONFIG_HAS_xxx to HPMSOC_HAS_xxx.
- segger: enable all warnings.
- segger: release: release optimization level use cmakelist config
- scripts: ses: set intermediate dir in project file.
- docs: remove quick start guide from top level readme
- docs: change doc structure.

### Added:
- soc: HPM5361: add trgm filter shift length feature
- soc & drivers: hpm5300: add DMAMUX_SOC_WRITEONLY and TRGM_SOC_HAS_DMAMUX_EN features
- drivers: lcb: add lcb driver.
- drivers: sdxc add more APIs for timing and power control.
- drivers: mipi_csi: add mipi csi.
- drivers: cam: add cam_stop_safely API
- components: usb: device: add dtd chain transfer
- components: panel: enable panel component.
- components: camera: ov5640: add mipi interface.
- middleware: rtthread-nano: add v3.1.5
- middleware: rtthread-nano: add FPU support.
- middleware: tinyusb: device: update to support chain transfer
- middleware: cherryusb: device: update to support chain transfer
- middleware: vglite: add 4.0.49.
- middleware: cherryusb: add USB_OSAL_WAITING_FOREVER for sem and mq use
- middleware: add hpm_mcl_v2
- middleware: lwip: add ptpd v1 & v2
- middleware: cmsis_os2: add source files.
- samples: mcl: add step motor.
- samples: lwip: lwip_ptp: v2: support IEEE1588 V2
- samples: cherryusb: add audio_v2_mic_speaker_rtthread sample
- samples: cherryusb: host: add hid and msc rtthread samples
- samples: cherryusb: host: usbnet: add support ec20 module sample.
- samples: cmsis_os2: add blinky sample.
- samples: driver: mipi_csi: add mipi_csi.
- samples: mcan Support MCAN4-7 loopback testing.
- cmake: support custom output file name.

### Fixed:
- soc: fix cache maintenance at startup
- soc: hpm53xx Correct exip API tree offset.
- soc: toolchain: missing .fast.* in gnu ld linker script.
- soc: fix tbss and tdata section not initialized.
- soc: sysctl: sysctl_enable_group_resource() should be check LOC_BUSY
- soc: hpm5300 Correct Cache size and Cacheline size.
- boards: hpm6750evkmini Fix the issue that eMMC is still 3.3V even 1.8V is selected.
- boards: hpm5301evklite correct jlink script device number.
- components: camera: power_up is enable by default for ov5640/ov7725.
- docs: samples: drivers: add numberic index.
- drivers/soc: fix build warning
- drivers: i2c: add slave device response judgment for master read/write APIs
- drivers: opamp: fix opamp vssa connect error.
- drivers: pllv2: fix pllctlv2_pll_is_stable() API
- drivers: qeiv2: fix invalid argument check
- drivers: dac: fix the upper limit value setting for DAC_OUTPUT
- drivers: jpeg: fix pixel format index for out buffer.
- drivers: uart: fix not support oversample 32 for rx idle detection on hpm5300
- middleware:ftafs Fix SD card init crash.
- middleware: mcl: fix path plan error.
- middleware: hpm_sdmmc Fix the issue that IO initialization work unstable on HPM6300.
- middleware: hpm_sdmmc Fix voltage switch setting issue for SD and eMMC.
- middleware: hpm_sdmmc Fix the PWR and VSEL IO initiaization issue. refs:hpm-sdk-#863
- samples: sei: fix nikon sample crc calc error.
- samples: cherryusb: msc device: add pre-format fat12 file system in u disk
- samples: adcx: replace const with a macro for ADC sample cycle
- samples: tinyusb:fix the usb host pin init.
- samples: motor_ctrl: bldc_littlevgl_foc: program crash.
- samples: qeiv2: uvw: fix uninitialized pointer usage
- samples: cherryusb: fix semaphore give in isr
- samples: drivers: Fix the issue that can error example may block.
- samples: uart_irq: fix unable to limit receive large than buffer size.
- samples: drivers:sdxc:emmc remove infinite loop for emmc initialization.
- samples: drivers: i2s: fix tx underflow during tx start
- samples: lwip: lwip_tcpecho_multiple_ports: fix no echo data when receiving large amounts of data
- samples: mcl: pwm duty set error.
- samples: cherryusb: host: usbnet: fixed when performing a stress test with a large amount of iperf data, will send fai.
- samples: cherryusb: audio_v2_mic_speaker_rtthread: fix mic no voice problem
- samples: jpeg_decode: add delay after usb pins init for waiting power stable
- samples: hfi: hpm6750evk2: fix the motor shake.
- cmake: segger: remove workstation specific path info.
- cmake/soc: fix heap/stack size setting for andes toolchain.
- cmake: ses: correct device name for core1.

## [1.3.0] - 2023-09-28:

Main changes since 1.2.0
Expand Down
34 changes: 24 additions & 10 deletions CMakeLists.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -7,6 +7,14 @@ if(${CMAKE_VERSION} VERSION_GREATER_EQUAL 3.20)
endif()
cmake_policy(SET CMP0079 NEW)

project(hpm_sdk)

add_library(${HPM_SDK_LIB} STATIC "")
target_link_libraries(${HPM_SDK_LIB} PUBLIC ${HPM_SDK_LIB_ITF})

add_library(${HPM_SDK_GCC_LIB} STATIC "")
target_link_libraries(${HPM_SDK_GCC_LIB} PUBLIC ${HPM_SDK_GCC_LIB_ITF} ${HPM_SDK_LIB_ITF})

if(flash_size)
sdk_linker_global_symbols("_flash_size=${flash_size}")
endif()
Expand All @@ -31,10 +39,8 @@ if(NOT ${CMAKE_BUILD_TYPE} STREQUAL "")
if(NOT DEFINED INCLUDE_BOOTHEADER)
SET(INCLUDE_BOOTHEADER 0)
endif()
set(USE_PRESET_FLASH_LINKER 0)
string(FIND ${build_type} "flash_" found)
if(${found} GREATER_EQUAL 0)
set(USE_PRESET_FLASH_LINKER 1)
string(FIND ${build_type} "flash_xip" found)
if(${found} GREATER_EQUAL 0)
set(FLASH_XIP 1)
Expand Down Expand Up @@ -85,16 +91,19 @@ else()
sdk_compile_options("-g")
endif()

if(NOT DEFINED USE_PRESET_FLASH_LINKER OR "${USE_PRESET_FLASH_LINKER}" EQUAL "0")
if(DEFINED CUSTOM_GCC_LINKER_FILE)
set(USE_CUSTOM_LINKER 1)
set(LINKER_SCRIPT ${CUSTOM_GCC_LINKER_FILE})
set(USE_PRESET_FLASH_LINKER 0)
if(DEFINED CUSTOM_GCC_LINKER_FILE)
set(USE_CUSTOM_LINKER 1)
if(NOT IS_ABSOLUTE ${CUSTOM_GCC_LINKER_FILE})
message(FATAL_ERROR "Custom ld script has to be absolute path not relative: ${CUSTOM_GCC_LINKER_FILE}")
else()
if(DEFINED USE_LINKER_TEMPLATE)
set(USE_CUSTOM_LINKER 1)
set(LINKER_SCRIPT ${PROJECT_BINARY_DIR}/linker.cmd)
endif()
set(LINKER_SCRIPT ${CUSTOM_GCC_LINKER_FILE})
endif()
elseif(DEFINED USE_LINKER_TEMPLATE)
set(USE_CUSTOM_LINKER 1)
set(LINKER_SCRIPT ${PROJECT_BINARY_DIR}/linker.cmd)
else()
set(USE_PRESET_FLASH_LINKER 1)
endif()

if(${EXCLUDE_SDK_STARTUP})
Expand Down Expand Up @@ -149,6 +158,11 @@ if(DEFINED USE_LINKER_TEMPLATE)
add_custom_target(${LINKER_TARGET} DEPENDS ${LINKER_SCRIPT})
endif()

if(NOT EXISTS ${LINKER_SCRIPT})
message(FATAL_ERROR "Can not locate GNU ld linker script: ${LINKER_SCRIPT}")
else()
message(STATUS "GNU ld linker script: ${LINKER_SCRIPT}")
endif()
sdk_ld_options("-T ${LINKER_SCRIPT}")

set(generated_file_path "${PROJECT_BINARY_DIR}/generated")
Expand Down
Loading

0 comments on commit 637c4be

Please sign in to comment.