Network power switch

I use it to toggle power of different devices

• ANEL NET-PwrCtrl - a network power strip with indiviually switchable outlets
• ATEN PDU - a fancier version of a network power strip additionally with per outlet power measurement
• Computers with IPMI or Redfish support
• PoE port power status of my HP 2530 switch, it should work with other switches IIRC

Requirements

• Python 3
• pysnmp
• pyghmi

Screenshots

ANEL NetPwrCtrl

PoE Switch

ATEN PDU

IPMI Host

Usage

Create the configuration as ~/.netpwrctrl.ini Run the program either directly:

`python3 netpwrctrl.py`

or put it in your path an just execute

`netpwrctrl.py`

Configuration

The configuration file must be in .ini format. Each device is configured in a section. The section name can be chosen freely. The name of the selected device will be displayed in the upper left corner.

Available device types are:

• anel_powerstrip for power strips from ANEL
• poe_pse in case of a poe switch (PSE=power sourcing equipment)
• ipmi
• redfish

Example config with all supported device types:

[NET-PwrCtrl]
device=anel_powerstrip
host=192.168.31.121
port=75
user=user1
pwd=anel
1=Lamp
2=IPMI Switch
3=Plant Lights
4=Amp
5=Monitor
6=Mixer
7=Plant Light II
8=Plant Light III
#preset1=0,0,0,0,0,0,0,0
#preset2=0,0,0,0,0,0,0,0
#preset3=0,0,0,0,0,0,0,0

[HP2530]
device=poe_pse
host=192.168.31.122
port=161
user=probe
authkey=snmpauthkey
auth_protocol=SHA
privkey=snmpprivkey
priv_protocol=DES
#preset1=0,0,0,0,0,0,0,0
#preset2=0,0,0,0,0,0,0,0
#preset3=0,0,0,0,0,0,0,0

[ATEN PDU]
device=aten_pdu
host=192.168.31.130
port=161
user=snmpusername
authkey=snmpauthkey
auth_protocol=MD5
privkey=snmpprivkey
priv_protocol=AES
#preset1=0,0,0,0,0,0,0,0
#preset2=0,0,0,0,0,0,0,0
#preset3=0,0,0,0,0,0,0,0

[SMC NAS IPMI]
device=ipmi
host=192.168.31.140
port=623
user=username
pwd=password

[SMC NODE 1 Redfish]
device=redfish
host=192.168.31.140
port=443
user=username
pwd=password