Click for the DEMO!
You may as well check the Doc!
| IoT Thing | Price (approximately) | Description |
|---|---|---|
| LoPy4 Multipack | €62.04 | 1x LoPy4, 1x Expansion Board, 1x LoRa/Sigfox Antenna |
| PIR motion sensor HC-SR501 | €5 | To detect the heat from humans and animals |
| Photoresistor | €2 | To detect the lightness outside |
| MCP9700 | €1.61 | To detect the temperature outside |
| 10m Wiring | €3.5 | The amount of wiring is dependent on the distance between sensors |
| (Optional) Battery holder 3xAAA | €2.5 | To allow pycom working without having it connected to a computer |
| (Optional) Multimeter | €11 | To measure voltage, current and resistance. |
| Software | Type | Description |
|---|---|---|
| Visual Studio Code | Open source app | Code editor made by Microsoft. We use it to write our code and upload it to device. |
| Node.js | Open source cross-platform | Runtime environment that runs on the V8 engine and executes JavaScript code outside a web browser. |
| Updating Device Firmware | Open source tool | After upgrading, we can use the Pymakr Plugins to upload and run programs in our devices. |
| Node-red | Open source development tool | Programming tool for wiring hardware devices together. |
| Pybytes | Free cloud platform | a device management platform that empowers you by giving you full control over your Pycom devices. (Account required) |
| Datacake | Limited platform for non-commercial purposes | where the data is saved and resend it to node-red to be handled by the bot. (Account required) |
You need to push your code UPDATE only src/ folder
You need to create the diagram within Node-Red Space as it shown in HERE