Skip to content

jandelgado/rabtap

Repository files navigation

rabtap - RabbitMQ wire tap

Build Status Coverage Status Go Report Card

Swiss army knife for RabbitMQ. Tap/Pub/Sub messages, create/delete/bind queues and exchanges, inspect broker.

Contents

Features

  • tap to messages being sent to exchanges using RabbitMQ exchange-to-exchange bindings without affecting actual message delivery (aka tapping)
  • display broker related information using the RabbitMQ REST management API
  • save messages and meta data for later analysis and replay
  • publish messages to exchanges
  • consume messages from queues and streams (subscribe)
  • filter output using flexible expressions
  • supports TLS
  • no runtime dependencies (statically linked golang single file binary)
  • simple to use command line tool
  • runs on Linux, Windows, Mac and wherever you can compile go

Screenshots

Show broker topology

Output of rabtap info command:

info mode

Output of rabtap info --stats command, showing additional statistics:

info mode

Visualize broker topology with graphviz

Using the --format=dot option, the info command can generate output in the dot format, which can be visualized using graphviz, e.g. rabtap info --show-default --format dot | dot -T svg > mybroker.svg. The resulting SVG file can be visualized with a web browser.

info mode

Tap messages

Output of rabtap in tap mode, showing message meta data and the message body:

info mode

Installation

Docker image

A docker image is provided so rabtap can be used as a docker container, e.g.

$ docker run --rm -ti ghcr.io/jandelgado/rabtap:latest

Pre-compiled binaries

Pre-compiled binaries can be downloaded for multiple platforms from the releases page.

Arch Linux

Rabtap can be installed from the Arch Linux User Repository (AUR):

$ yay -S rabtap

Installation from source

See the build from source section if you prefer to compile from source.

Usage

rabtap - RabbitMQ wire tap.                    github.com/jandelgado/rabtap

Usage:
  rabtap info [--api=APIURI] [--consumers] [--stats] [--filter=EXPR] [--omit-empty]
              [--show-default] [--mode=MODE] [--format=FORMAT] [-kncv]
              [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]
  rabtap tap EXCHANGES [--uri=URI] [--saveto=DIR] [--format=FORMAT]  [--limit=NUM] 
	      [--idle-timeout=DURATION] [--filter=EXPR] [-jkncsv]
	      [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]
  rabtap (tap --uri=URI EXCHANGES)... [--saveto=DIR] [--format=FORMAT]  [--limit=NUM] 
	      [--idle-timeout=DURATION] [--filter=EXPR] [-jkncsv]
              [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]
  rabtap sub QUEUE [--uri URI] [--saveto=DIR] [--format=FORMAT] [--limit=NUM]
              [--offset=OFFSET] [--args=KV]... [(--reject [--requeue])] [-jkcsvn]
              [--filter=EXPR] [--idle-timeout=DURATION]
              [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]
  rabtap pub  [--uri=URI] [SOURCE] [--exchange=EXCHANGE] [--format=FORMAT]
              [--routingkey=KEY | (--header=KV)...] [ (--property=KV)... ]
              [--confirms] [--mandatory] [--delay=DELAY | --speed=FACTOR] [-jkv]
              [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]
  rabtap exchange create EXCHANGE [--uri=URI] [--type=TYPE] [--args=KV]... [-kv]
              [--autodelete] [--durable]
              [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]
  rabtap exchange bind EXCHANGE to DESTEXCHANGE [--uri=URI] [-kv]
              (--bindingkey=KEY | (--header=KV)... (--all|--any))
              [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]
  rabtap exchange rm EXCHANGE [--uri=URI] [-kv]
              [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]
  rabtap queue create QUEUE [--uri=URI] [--queue-type=TYPE] [--args=KV]... [-kv]
              [--autodelete] [--durable] [--lazy]
              [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]
  rabtap queue bind QUEUE to EXCHANGE [--uri=URI] [-kv]
              (--bindingkey=KEY | (--header=KV)... (--all|--any))
              [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]
  rabtap queue unbind QUEUE from EXCHANGE [--uri=URI] [-kv]
              (--bindingkey=KEY | (--header=KV)... (--all|--any))
              [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]
  rabtap queue rm QUEUE [--uri=URI] [-kv]
              [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]
  rabtap queue purge QUEUE [--uri=URI] [-kv]
              [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]
  rabtap conn close CONNECTION [--api=APIURI] [--reason=REASON] [-kv]
              [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]
  rabtap --version
  rabtap (-h | --help | help) [properties]

Arguments and options:
 EXCHANGES            comma-separated list of exchanges and optional binding keys,
                      e.g. amq.topic:# or exchange1:key1,exchange2:key2.
 EXCHANGE             name of an exchange, e.g. amq.direct.
 DESTEXCHANGE         name of a a destination exchange in an exchange-to-exchange binding.
 SOURCE               file or directory to publish in pub mode. If omitted, stdin will be read.
 QUEUE                name of a queue.
 CONNECTION           name of a connection.
 DIR                  directory to read messages from.
 -a, --autodelete     create auto delete exchange/queue.
 --all                set x-match=all option in header based routing.
 --any                set x-match=any option in header based routing.
 --api=APIURI         connect to given API server. If APIURL is omitted,
                      the environment variable RABTAP_APIURI will be used.
 --args=KV            A key value pair in the form of "key=value" passed as
                      additional arguments. e.g. '--args=x-queue-type=quorum'
 -b, --bindingkey=KEY binding key to use in bind queue command.
 --by-connection      output of info command starts with connections.
 -c, --color          force colored output
 --confirms           enable publisher confirms and wait for confirmations.
 --consumers          include consumers and connections in output of info command.
 --delay=DELAY        Time to wait between sending messages during publish.
                      If not set then messages will be delayed as recorded.
                      The value must be suffixed with a time unit, e.g. ms, s etc.
 -d, --durable        create durable exchange/queue.
 --exchange=EXCHANGE  Optional exchange to publish to. If omitted, exchange will
                      be taken from message being published (see JSON message format).
 --filter=EXPR        Predicate for sub, tap, info command to filter the output [default: true]
 --format=FORMAT      * for tap, pub, sub command: format to write/read messages to console
                        and optionally to file (when --saveto DIR is given).
                        Valid options are: "raw", "json", "json-nopp". Default: raw
                      * for info command: controls generated output format. Valid
                        options are: "text", "dot". Default: text
 -h, --help           print this help
 --header=KV          A key value pair in the form of "key=value" used as a
                      routing- or binding-key. Can occur multiple times.
 --idle-timeout=DURATION end reading messages when no new message was received
                      for the given duration.  The value must be suffixed with 
                      a time unit, e.g. ms, s etc.
 -j, --json           deprecated. Use "--format json" instead.
 -k, --insecure       allow insecure TLS connections (no certificate check).
 --lazy               create a lazy queue.
 --limit=NUM          Stop afer NUM messages were received. When set to 0, will
                      run until terminated [default: 0].
 --mandatory          enable mandatory publishing (messages must be delivered to queue).
 --mode=MODE          mode for info command. One of "byConnection", "byExchange".
                      [default: byExchange].
 -n, --no-color       don't colorize output (see also environment variable NO_COLOR).
 --omit-empty         don't show echanges without bindings in info command.
 --offset=OFFSET      Offset when reading from a stream. Can be 'first', 'last',
                      'next', a duration like '10m', a RFC3339-Timestamp or
                      an integer index value. Basically it is an alias for
                      '--args=x-stream-offset=OFFSET'.
 --property=KV        A key value pair in the form of "key=value" to specify 
	              message properties like e.g. the content-type.
 --queue-type=TYPE    type of queue [default: classic].
 --reason=REASON      reason why the connection was closed [default: closed by rabtap].
 --reject             Reject messages. Default behaviour is to acknowledge messages.
 --requeue            Instruct broker to requeue rejected message
 -r, --routingkey=KEY routing key to use in publish mode. If omitted, routing key
                      will be taken from message being published (see JSON
                      message format).
 --saveto=DIR         also save messages and metadata to DIR.
 --show-default       include default exchange in output info command.
 -s, --silent         suppress message output to stdout.
 --speed=FACTOR       Speed factor to use during publish [default: 1.0].
 --stats              include statistics in output of info command.
 -t, --type=TYPE      type of exchange [default: fanout].
 --tls-cert-file=CERTFILE A Cert file to use for client authentication.
 --tls-key-file=KEYFILE   A Key file to use for client authentication.
 --tls-ca-file=CAFILE     A CA Cert file to use with TLS.
 --uri=URI            connect to given AQMP broker. If omitted, the
                      environment variable RABTAP_AMQPURI will be used.
 -v, --verbose        enable verbose mode.
 --version            show version information and exit.

Examples:
  rabtap tap --uri amqp://guest:guest@localhost/ amq.fanout:
  rabtap tap --uri amqp://guest:guest@localhost/ amq.topic:#,amq.fanout:
  rabtap pub --uri amqp://guest:guest@localhost/ --exchange amq.topic message.json --format=json
  rabtap info --api http://guest:guest@localhost:15672/api

  # use RABTAP_AMQPURI environment variable to specify broker instead of --uri
  export RABTAP_AMQPURI=amqp://guest:guest@localhost:5672/
  rabtap queue create JDQ
  rabtap queue bind JDQ to amq.topic --bindingkey=key
  echo "Hello"| gzip | rabtap pub --exchange amq.topic --routingkey "key" --property ContentType=gzip
  rabtap sub JDQ

  # print only messages that have ".Name == 'JAN'" in their JSON payload
  rabtap sub JDQ --filter="let b=fromJSON(r.toStr(r.body(r.msg))); b.Name == 'JAN'" 
  rabtap queue rm JDQ

  # use RABTAP_APIURI environment variable to specify mgmt api uri instead of --api
  export RABTAP_APIURI=http://guest:guest@localhost:15672/api
  rabtap info
  rabtap info --filter "r.binding.Source == 'amq.topic'" --omit-empty
  rabtap conn close "172.17.0.1:40874 -> 172.17.0.2:5672"

  # use RABTAP_TLS_CERTFILE | RABTAP_TLS_KEYFILE | RABTAP_TLS_CAFILE environments variables
  # instead of specifying --tls-cert-file=CERTFILE --tls-key-file=KEYFILE --tls-ca-file=CAFILE

Command overview

Rabtap understands the following commands:

  • tap - taps to an exchange and receives messages sent to the exchange, without affecting actual message delivery (using an exchange-to-exchange binding).
  • sub - subscribes to a queue and consumes from the queue
  • pub - publish messages to an exchange, optionally with the timing as recorded
  • info - show broker related info (exchanges, queues, bindings, stats).
  • queue - create,bind,unbind,remove or purge queues
  • exchange - create or remove exchanges
  • conn - close connections

See the below for detailed information.

Broker URI specification

The specification of the RabbitMQ broker URI follows the AMQP URI specification as implemented by the go RabbitMQ client library.

Examples:

  • amqp://guest:guest@localhost:5672/
  • amqps://guest:guest@my-broker.dev:5671/
  • amqps://guest:guest@my-broker.dev:5671/vhost

Note that according to RFC3986 it might be necessary to escape certain characters like e.g. ? (%3F) or # (%23) as otherwise parsing of the URI may fail with an error.

Authentication

Authentication is either by the username and password provided in the broker URI as desribed above (RabbitMQ PLAIN method), or by mTLS providing a client certificate and key using the --tls-key-file, --tls-cert-file options (RabbitMQ EXTERNAL method). If both mTLS and a username and password is provided, then rabtap will use mTLS and PLAIN authentication with the given username and password.

Environment variables

Use environment variables to specify standard values for broker and api endpoint.

Default RabbitMQ broker

In cases where the URI argument is optional, e.g. rabtap tap [-uri URI] exchange ..., the URI of the RabbitMQ broker can be set with the environment variable RABTAP_AMQPURI. Example:

$ export RABTAP_AMQPURI=amqp://guest:guest@localhost:5672/
$ rabtap tap amq.fanout:
...

Default RabbitMQ management API endpoint

The default RabbitMQ management API URI can be set using the RABTAP_APIURI environment variable. Example:

$ export RABTAP_APIURI=http://guest:guest@localhost:15672/api
$ rabtap info
...

Default RabbitMQ TLS config

The default TLS certificates path can be set using the RABTAP_TLS_CERTFILE and RABTAP_TLS_KEYFILE and RABTAP_TLS_CAFILE environments variables. All certificate and key files are expected in PEM format. Example:

$ export RABTAP_TLS_CERTFILE=/path/to/certs/user.crt
$ export RABTAP_TLS_KEYFILE=/path/to/certs/user.key
$ export RABTAP_TLS_CAFILE =/path/to/certs/ca.crt
$ echo "Hello" | rabtap pub --exchange amq.topic --routingkey "key"
...

Colored output

Output is colored, when writing to a terminal. This behaviour can be changed:

  • set environment variable NO_COLOR to disable color output (or set --no-color option)
  • set --color option to force colored output

Command reference and examples

The following examples assume a RabbitMQ broker running on localhost:5672 and the management API available on port localhost:15672. Easiest way to start such an instance is by running docker run -ti --rm -p 5672:5672 -p 15672:15672 rabbitmq:3-management or similar command to start a RabbitMQ container.

Broker info

The info command uses the REST API of RabbitMQ to gather and display topolgy related information from the broker.

The --mode MODE option controls how the output is structured. Valid options for MODE are byExchange (default) or byConnection.

The --format=FORMAT option controls the format of generated output. Valid options are text for console text format (default) or dot to output the tree structure in dot format for visualization with graphviz.

The features of an exchange are displayed in square brackets with D (durable), AD (auto delete) and I (internal). The features of a queue are displayed in square brackets with D (durable), AD (auto delete) and EX (exclusive).

If the --stats option is enabled, basic statistics are included in the output.

The --filter option allows to filter output. See filtering section for details. Use the --by-connection to sort output by connection (implies --consumers)

Examples (assume that RABTAP_APIURI environment variable is set):

  • rabtap info --consumers - shows virtual hosts exchanges, queues and consumers of given broker in a tree view (see screenshot).
  • rabtap info --mode=byConnection - shows virtual hosts, connections, consumers and queues of given broker in an tree view.
  • rabtap info --format=dot | dot -T svg > broker.svg - renders broker info into dot format and uses graphviz to render a SVG file for final visualization.

Wire-tapping messages

The tap command allows to tap to exchanges and transparently receive the messages sent to the exchanges. The general form of the tap command is either

rabtap tap EXCHANGES [--uri=URI] [--saveto=DIR] [--format=FORMAT]  [--limit=NUM]
       [--idle-timeout=DURATION] [--filter=EXPR] [-jkncsv]
       [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]

or, to connect to multiple brokers simultanously,

rabtap (tap --uri=URI EXCHANGES)... [--saveto=DIR] [--format=FORMAT]  [--limit=NUM]
       [--idle-timeout=DURATION] [--filter=EXPR] [-jkncsv]
       [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]

The EXCHANGES argument specifies the exchanges and binding keys to use. The EXCHANGES argument is of the form EXCHANGE:[KEY][,EXCHANGE:[KEY]]*. If the exchange name contains a colon, use \\: to escape it, e.g. myexchange\\:with\\:colons:KEY.

The acutal format of the binding key depends on the exchange type (e.g. direct, topic, headers) and is described in the RabbitMQ documentation.

When --saveto=DIR is set, received messages will be written to the specified directory. The --formate=FORMAT option controls the format of output both on the console as well as in the written files (see below for details).

The --filter EXPR allows filtering of messages using an expression language. See Filtering for details and examples.

Use the --limit=NUM option to limit the number of received messages. If specified, rabtap will terminate, after NUM messages were read and passed the filter (if set).

When --idle-timeout=DURATION is set, the subscribe command will terminate when no new messages were received in the given time period. Look for the description of the --delay option for the format of the DURATION parameter.

Examples for binding keys used in tap command:

  • # on an exchange of type topic will make the tap receive all messages on the exchange.
  • a valid queue name for an exchange of type direct binds exactly to messages destined for this queue
  • an empty binding key for exchanges of type fanout or type headers will receive all messages published to these exchanges

Note: on exchanges of type headers the binding key is currently ignored and all messages are received by the tap.

The following examples assume that the RABTAP_AMQPURI environment variable is set, otherwise you have to pass the additional --uri URI parameter to the commands below.

  • $ rabtap tap my-topic-exchange:#
  • $ rabtap tap my-fanout-exchange:
  • $ rabtap tap my-headers-exchange:
  • $ rabtap tap my-direct-exchange:binding-key

The following example connects to multiple exchanges:

  • $ rabtap tap my-fanout-exchange:,my-topic-exchange:#,my-other-exchange:binding-key
Tap all messages published or delivered (RabbitMQ FireHose)

The RabbitMQ Firehose Tracer allows to "see" every message that is published or delivered. To use it, the FireHose tracer has to be enabled first:

$ rabbitmqctl trace_on

Afterwards, every message published or delivered will be CC'd to the topic exhange amq.rabbitmq.trace. The messages can now be tapped with rabtap:

$ rabtap --uri amqp://guest:guest@localhost:5672/ tap amq.rabbitmq.trace:published.#

RabbitMQ sends all messages published or delivered to the FireHose exchange. Published messages are sent with the routing key publish.{exchangename}, while delivered messages are sent with the routing key deliver.{queuename}. Depending on what you want to record, specify your binding accordingly.

Replaying messages from the FireHose exchange

When messages are tapped or subscribed from the FireHose tracer exchange, these messages have the original meta data stored in the headers section of the message. When published later, rabtap detects that these message was recorded from the FireHose (by examining the exchange attribute, which will be set to amq.rabbitmq.trace by RabbitMQ in that case) and automatically transform the message so that the originally published messages are replayed again.

Connect to multiple brokers

Rabtap allows you also to connect simultaneously to multiple brokers and exchanges:

$ rabtap tap --uri amqp://broker1 amq.topic:# tap --uri amqp://broker2 amq.fanout:

The example connects to broker1 and taps to the amq.topic exchange and to the amq.fanout exchange on broker2.

Message recorder

All tapped messages can be also be saved for later analysis or replay. Rabtap supports saving of messages in two formats: raw body and metadata in separate files or JSON message format with embedded metadata and message the body base64 encode. Examples:

  • $ rabtap tap amq.topic:# --saveto /tmp - saves messages as pair of files consisting of raw message body and JSON meta data file to /tmp directory.
  • $ rabtap tap amq.topic:# --saveto /tmp --format json - saves messages as JSON files to /tmp directory.

Files are created with file name rabtap-+<Unix-Nano-Timestamp>+ . + <extension>.

Subscribe messages

The sub command reads messages from a queue or a stream. The general form of the sub command is:

rabtap sub QUEUE [--uri URI] [--saveto=DIR] [--format=FORMAT] [--limit=NUM]
       [--offset=OFFSET] [--args=KV]... [(--reject [--requeue])] [-jkcsvn]
       [--filter=EXPR] [--idle-timeout=DURATION]
       [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]

Use the --reject option to 'nack' messages, which in turn will be discarded by the broker or routed to a configured dead letter exchange (DLX). if --requeue is also set, the message will be returned to the queue.

The --offset=OFFSET option is used when subscribing to streams. Streams are append-only data structures with non-destructive semantics and were introduced with RabbitMQ 3.9. The OFFSET parameter specifies where to start reading from the stream and must be any of: first, last, next, a numerical offset, a RFC3339-Timestamp or a duration specification like 10m. Consult the RabbitMQ documentation for more information on streams.

When --idle-timeout=DURATION is set, the subscribe command will terminate when no new messages were received in the given time period. Look for the description of the --delay option for the format of the DURATION parameter.

Refer to the tap command for a description of the --filter=EXPR, --limit=NUM, --saveto=DIR and --format=FORMAT options.

Examples:

  • rabtap sub somequeue --format=json - will consume messages from queue somequeue and print out messages in JSON format. The Example assumes that RABTAP_AMQPURI environment variable is set, as the --uri=AMQPURI parameter is omitted
  • rabtap sub somequeue --limit=1 --reject --requeue - consume one message from the queue somequeue, then exit, and let the broker requeue the message
  • rabtap sub mystream --offset=first - read all messages from the stream mystream
  • rabtap sub mystream --offset=50 - read messages from stream mystream starting with the 50th message
  • rabtap sub mystream --offset=10m - read messages from stream mystream which are aged 10 minutes or less
  • rabtap sub somequeue --idle-timeout=5s - read messages from queue somequeue and exit when there is no new message received for 5 seconds

Publish messages

The pub command is used to publish messages to an exchange. The general form of the pub command is:

rabtap pub  [--uri=URI] [SOURCE] [--exchange=EXCHANGE] [--format=FORMAT]
            [--routingkey=KEY | (--header=KV)...] [ (--property=KV)... ]
            [--confirms] [--mandatory] [--delay=DELAY | --speed=FACTOR] [-jkv]
            [(--tls-cert-file=CERTFILE --tls-key-file=KEYFILE)] [--tls-ca-file=CAFILE]

The SOURCE parameter specifies the messages to be published. These are either read from a file, or from a directory which contains previously recorded messages (e.g. using the --saveto option of the tap command). If SOURCE is omitted, stdin is used.

Message routing is either specified with a routing key and the --routingkey option or, when header based routing should be used, by specifying the headers with the --header option. Each header is specified in the form KEY=VALUE. Multiple headers can be specified by specifying multiple --header options.

Messages can be published either in raw format, in which they are sent as-is, or in JSON-format, as described here (--format=json), which includes message metadata and the body in a single JSON document. When multiple messages are published with metadata, rabtap will calculate the time elapsed of consecutive recorded messages using the metadata, and delay publishing accordingly.

To set the publishing delay to a fix value, use the --delay option. To publish without delays, use --delay=0s. To modify publishing speed use the --speed option, which allows to set a factor to apply to the delays. A delay is a sequence of decimal numbers, each with optional fraction and a unit suffix, such as 300ms, -1.5h or 2h45m. Valid time units are ns, us (or µs), ms, s, m, h.

When the --confirms option is set, rabtap waits for publisher confirmations from the server and logs an error if a confirmation is negative or not received (slows down throughput),

When the --mandatory option is set, rabtap publishes message in mandatory mode. If set and a message can not be delivered to a queue, the server returns the message and rabtap will log an error.

Use the --property option to set message properties like ContentType etc. Multiple properties can be specified by specifying multiple --property options. Run rabtap help properties to see the list of available properties:

DeliveryMode    - delivery mode: 'transient' or 'persistent' 
Priority        - message priority for priority queues
Expiration      - message TTL (ms)
ContentType     - application use - MIME content type
ContentEncoding - application use - MIME content encoding
CorrelationId   - application use - correlation identifier
ReplyTo         - application use - address to reply to
MessageId       - application use - message identifier
Timestamp       - application use - RFC3339 message timestamp
Type            - application use - message type name
AppId           - application use - creating application id
UserId          - user id, validated if set

Examples:

  • echo hello | rabtap pub --exchange amq.fanout - publish "hello" to exchange amqp.fanout
  • echo "hello" | rabtap pub --exchange amq.header --header KEY=VAL --header X=Y - publish hello to exchange amq.header and set given message headers
  • rabtap pub messages.json --format=json - messages are read from file messages.json in rabtap JSON format. Target exchange and routing keys are read from the messages meta data. The messages.json file can contain multiple JSON documents as it is treated as a JSON stream. Rabtap will honor the XRabtapReceived timestamps of the messages and by default will delay the messages as they were recorded. This behaviour can be overridden by the --delay and --speed options
  • rabtap pub --exchange amq.direct -r myKey --format=json messages.json --delay=0s - as before, but publish messages always to exchange amq.direct with routing key myKey and without any delays
  • rabtap pub --exchange amq.direct -r myKey --format=raw somedir --delay=0s - as before, but assuming that somedir is a directory, the messages are read from message files previously recorded to this directory and replayed in the order they were recorded
  • echo hello | rabtap pub --exchange amq.fanout --property Expiration=1000 - publish hello to exchange amq.fanout and set the message expiration to 1000ms.
  • echo hello | gzip | rabtap pub --exchange amq.fanout --property ContentEncoding=gzip - publish gzip compressed hello to exchange amq.fanout and set the ContentEncoding message property accordingly.

Poor mans shovel

Rabtap instances can be linked through a pipe and messages will be read on one side and published to the other. Note that for publish to work in streaming mode, the JSON mode (--format json) must be used on both sides, so that messages are encapsulated in JSON messages.

The example taps messages on broker1 and publishes the messages to the amq.direct exchange on broker2

$ rabtap tap --uri amqp://broker1 my-topic-exchange:# --format json | \
  rabtap pub --uri amqp://broker2 --exchange amq.direct -r routingKey --format json

Close connection

The conn command allows to close a connection. The name of the connection to be closed is expected as parameter. Use the info command with the --consumers option to find the connection associated with a queue. Example:

$ rabtap info --consumers
http://localhost:15672/api (broker ver='3.6.9', mgmt ver='3.6.9', cluster='rabbit@ae1ad1477419')
└── Vhost /
    ├── amq.direct (exchange, type 'direct', [D])
    :
    └── test-topic (exchange, type 'topic', [AD])
        ├── test-q-test-topic-0 (queue, key='test-q-test-topic-0', running, [])
        │   └── __rabtap-consumer-4823a3c0 (consumer user='guest', chan='172.17.0.1:59228 -> 172.17.0.2:5672 (1)')
        │       └── '172.17.0.1:59228 -> 172.17.0.2:5672' (connection client='https://github.com/streadway/amqp', host='172.17.0.2:5672', peer='172.17.0.1:59228')
        ├── test-q-test-topic-1 (queue, key='test-q-test-topic-1', running, [])
        :
$ rabtap conn close '172.17.0.1:59228 -> 172.17.0.2:5672'

Exchange commands

The exchange command is used to create, remove and bind exchanges:

$ rabtap exchange create myexchange --type topic
$ rabtap exchange rm myexchange

The create commands allows to specify additional arguments to be passed to RabbitMQ using the --args=key=value syntax:

$ rabtap exchange create myexchange --type topic --args=alternate-exchange=myae

The bind command creates an exchange-to-exchange binding (similar to a queue-to-exchange binding):

$ rabtap exchange bind myechange to destexchange --bindingkey=KEY

Queue commands

The queue command is used to create, remove, bind or unbind queues:

$ rabtap queue create myqueue
$ rabtap info --show-default
http://localhost:15672/api (broker ver='3.7.8', mgmt ver='3.7.8', cluster='rabbit@b2fe3b3b6826')
└── Vhost /
    ├── (default) (exchange, type 'direct', [D])
    │   └── myqueue (queue, key='myqueue', idle since 2018-12-07 20:46:15, [])
    :
    └── amq.topic (exchange, type 'topic', [D])
$ rabtap queue bind myqueue to amq.topic --bindingkey hello
$ rabtap info --show-default
http://localhost:15672/api (broker ver='3.7.8', mgmt ver='3.7.8', cluster='rabbit@b2fe3b3b6826')
└── Vhost /
    ├── (default) (exchange, type 'direct', [D])
    │   └── myqueue (queue, key='myqueue', idle since 2018-12-07 20:46:15, [])
    :
    └── amq.topic (exchange, type 'topic', [D])
        └── myqueue (queue, key='hello', idle since 2018-12-07 20:46:15, [])
$ rabtap queue unbind myqueue from amq.topic --bindingkey hello
$ rabtap info --show-default
http://localhost:15672/api (broker ver='3.7.8', mgmt ver='3.7.8', cluster='rabbit@b2fe3b3b6826')
└── Vhost /
    ├── (default) (exchange, type 'direct', [D])
    │   └── myqueue (queue, key='myqueue', idle since 2018-12-07 20:46:15, [])
    :
    └── amq.topic (exchange, type 'topic', [D])
$ rabtap queue purge myqueue
$ rabtap queue rm myqueue
$ rabtap info
http://localhost:15672/api (broker ver='3.7.8', mgmt ver='3.7.8', cluster='rabbit@b2fe3b3b6826')
└── Vhost /
    :
    └── amq.topic (exchange, type 'topic', [D])

The create commands allows to specify additional arguments to be passed to RabbitMQ using the --args=key=value syntax. This allows for example to specify the queue type or mode:

  • rabtap queue create quorum_queue --args=x-queue-type=quorum --durable - create a quorum queue named quorum_queue. The same can be achieved by using the --queue-type option, which is an alias for setting the arg x-queue-type: rabtap queue create quorum --queue-type=quorum --durable
  • rabtap queue create mystream --queue-type=stream --durable - create a stream
  • rabtap queue create lazy_queue --lazy - create a classic queue in lazy mode that is named lazy_queue. --lazy is an alias for setting the arg x-queue-mode

Format specification for tap and sub command

The --format=FORMAT option controls the format of the tap and sub commands when writing messages to the console and optionally to the filesystem (i.e. when --saveto=DIR is set). The FORMAT parameter has the following effect on the output:

FORMAT Format on console Format of saved messages (--saveto DIR)
raw (default) Pretty-printed metadata + raw Message body Metadata as JSON-File + Body as-is
json Pretty-printed JSON wiht base64 encoded body Pretty-printed JSON with base64 encoded body
json-nopp Single line JSON wiht base64 encoded body Pretty-printed JSON with base64 encoded body

Notes:

  • the --json option is now deprecated. Use --format=json instead
  • nopp stands for no pretty-print
  • When the message body is output on the console in raw format, Rabtap takes the ContentEncoding property into account and decompresses the body if necessary. Currently supported encodings are gzip, deflate, zstd, and bzip2.

JSON message format

When using the --format json option, messages are print/read as a stream of JSON messages in the following format:

{
  "ContentType": "text/plain",
  "ContentEncoding": "",
  "DeliveryMode": 0,
  "Priority": 0,
  "CorrelationID": "",
  "ReplyTo": "",
  "Expiration": "",
  "MessageID": "",
  "Timestamp": "2017-11-10T00:13:38+01:00",
  "Type": "",
  "UserID": "",
  "AppID": "rabtap.testgen",
  "DeliveryTag": 27,
  "Redelivered": false,
  "Exchange": "amq.topic",
  "RoutingKey": "test-q-amq.topic-0",
  "XRabtapReceivedTimestamp": "2019-06-13T19:33:51.920711583+02:00",
  "Body": "dGhpcyB0ZXN0IG1lc3NhZ2U .... IGFuZCBoZWFkZXJzIGFtcXAuVGFibGV7fQ=="
}

Note that in JSON mode, the Body is base64 encoded.

Filtering output

When your brokers topology is complex, the output of the info command can become very bloated. The --filter helps you to narrow output to the desired information. The same filtering mechanism can be applied to the tap and sub commands to filter only messages of interest.

Filtering expressions

A filtering expression is a function that evaluates to true or false (i.e. a predicate). When a filter is used, output will be supressed, if the predicate evalautes to false.

Rabtap uses Expr to evaluate predicates. This allows for complex expressions. See the official expr-lang documentation for further information.

Note: prior to version 1.40, rabtap used govaluate to evaluate expressions. With the switch to Expr, the syntax has changed in some aspects (e.g. =~ vs matches in regular expression matches). Consult the documentation for details.

Evaluation context

During evaluation, the context (i.e. the current exchange, queue, etc.) is made available to the filter expression as variables. In the info command, the following context is set:

When using rabtap --info --mode=byExchange (which is the default), the following variables are bound:

  • the current exchange is bound to the variable r.exchange
  • the current queue is bound to the variable r.queue
  • the current binding is bound to the variable r.binding

When using rabtap --info --mode=byConnection , the following variables are bound:

  • the current connection is bound to the variable r.connection
  • the current channel is bound to the variable r.connection

In the sub and tap commands, the following context is set:

  • the current received message is bound to the variable r.msg, which allows access to the message-metadata and the body
  • the current count of messages received that passed the filter is bound to r.count
  • Helper functions are provided to access the message body:
    • the r.toStr function converts a byte buffer into a string, e.g. let b=toJSON(r.toStr(r.msg.Body))
    • the r.gunzip function decompresses the given byte buffer, e.g. let b=toJSON(r.toStr(r.gunzip(r.msg.Body))), allowing to inspect a compressed body
    • the r.body function returns the message body, decompressing if necessary (i.e. if ContentType is gzip), e.g. let b=toJSON(r.toStr(r.body(r.msg))
Examples

The examples assume that the RABTAP_APIURI environment variable points to the broker to be used, e.g. http://guest:guest@localhost:15672/api).

  • rabtap info --filter "exchange.Name == 'amq.direct'" --omit-empty - print only queues bound to exchange amq.direct and skip all empty exchanges.
  • rabtap info --filter "queue.Name matches '.*test.*'" --omit-empty - print all queues with test in their name
  • rabtap info --filter "queue.Name matches '.*test.*' && exchange.Type == 'topic'" --omit-empty - like before, but consider only exchanges of type topic.
  • rabtap info --filter "queue.Consumers > 0" --omit --stats --consumers - print all queues with at least one consumer
  • rabtap info --mode=byConnection --filter="r.channel.PrefetchCount > 1 - list all connection with channel that have a prefetch-count > 1
  • rabtap info --mode=byConnection --filter="r.connection.PeerCertSubject matches '.*CN=guest.*'" - list all connection that were authenticated using mTLS and which certificates subject contains CN=guest
  • rabtap sub JDQ --filter="r.msg.RoutingKey == 'test'" - print only messages that were sent with the routing key test
  • rabtap sub JDQ --filter="let b=fromJSON(r.toStr(r.gunzip(r.msg.Body))); b.Name == 'JAN'" - print only messages that have .Name == "JAN" in their gzipped payload, interpreted as JSON

Type reference

The types reflect more or less the JSON API objects of the REST API of RabbitMQ transformed to golang types.

Exchange type
Definition of the Exchange type
type Exchange struct {
    Name       string
    Vhost      string
    Type       string
    Durable    bool
    AutoDelete bool
    Internal   bool
    MessageStats struct {
        PublishOut
        PublishOutDetails struct {
            Rate float64
        }
        PublishIn        int
        PublishInDetails struct {
            Rate float64
        }
    }
}
Queue type
Definition of the Queue type
type Queue struct {
    MessagesDetails struct {
        Rate float64
    }
    Messages
    MessagesUnacknowledgedDetails struct {
        Rate float64
    }
    MessagesUnacknowledged int
    MessagesReadyDetails   struct {
        Rate float64
    }
    MessagesReady     int
    ReductionsDetails struct {
        Rate float64
    }
    Reductions int
    Node       string
    Exclusive            bool
    AutoDelete           bool
    Durable              bool
    Vhost                string
    Name                 string
    MessageBytesPagedOut int
    MessagesPagedOut     int
    BackingQueueStatus   struct {
        Mode string
        Q1   int
        Q2   int
        Q3  int
        Q4  int
        Len int
        NextSeqID         int
        AvgIngressRate    float64
        AvgEgressRate     float64
        AvgAckIngressRate float64
        AvgAckEgressRate  float64
    }
    MessageBytesPersistent     int
    MessageBytesRAM            int
    MessageBytesUnacknowledged int
    MessageBytesReady          int
    MessageBytes               int
    MessagesPersistent         int
    MessagesUnacknowledgedRAM  int
    MessagesReadyRAM           int
    MessagesRAM                int
    GarbageCollection          struct {
        MinorGcs        int
        FullsweepAfter  int
        MinHeapSize     int
        MinBinVheapSize int
        MaxHeapSize     int
    }
    State string
    Consumers int
    IdleSince string
    Memory    int
}
Binding type
Definition of the Binding type
type Binding struct {
    Source          string
    Vhost           string
    Destination     string
    DestinationType string
    RoutingKey      string
    PropertiesKey string
}
Connection type
Definition of the Connection type
type Connection struct {
    ReductionsDetails struct {
        Rate float64
    }
    Reductions     int
    RecvOctDetails struct {
        Rate float64
    }
    RecvOct        int
    SendOctDetails struct {
        Rate float64
    }
    SendOct          int
    ConnectedAt      int64
    ClientProperties struct {
        Product        string
        Version        string
        ConnectionName string
        Capabilities   struct {
            ConnectionBlocked    bool
            ConsumerCancelNotify bool
        }
    }
    ChannelMax        int
    FrameMax          int
    Timeout           int
    Vhost             string
    User              string
    Protocol          string
    SslHash           string
    SslCipher         string
    SslKeyExchange    string
    SslProtocol       string
    AuthMechanism     string
    PeerCertValidity  string
    PeerCertIssuer    string
    PeerCertSubject   string
    Ssl               bool
    PeerHost          string
    Host              string
    PeerPort          int
    Port              int
    Name              string
    Node              string
    Type              string
    GarbageCollection struct {
        MinorGcs        int
        FullsweepAfter  int
        MinHeapSize     int
        MinBinVheapSize int
        MaxHeapSize     int
    }
    Channels int
    State    string
    SendPend int
    SendCnt  int
    RecvCnt  int
}
Channel type
Definition of the Channel type
type Channel struct {
    ReductionsDetails struct {
        Rate float64
    }
    Reductions   int
    MessageStats struct {
        ReturnUnroutableDetails struct {
            Rate float64
        }
        ReturnUnroutable int
        ConfirmDetails   struct {
            Rate float64
        }
        Confirm        int
        PublishDetails struct {
            Rate float64
        }
        Publish    int
        Ack        int
        AckDetails struct {
            Rate float64
        }
        Deliver        int
        DeliverDetails struct {
            Rate float64
        }
        DeliverGet        int
        DeliverGetDetails struct {
            Rate float64
        }
        DeliverNoAck        int
        DeliverNoAckDetails struct {
            Rate float64
        }
        Get        int
        GetDetails struct {
            Rate float64
        }
        GetEmpty        int
        GetEmptyDetails struct {
            Rate float64
        }
        GetNoAck        int
        GetNoAckDetails struct {
            Rate float64
        }
        Redeliver        int
        RedeliverDetails struct {
            Rate float64
        }
    }
    Vhost             string
    User              string
    Number            int
    Name              string
    Node              string
    ConnectionDetails ConnectionDetails // see below
    GarbageCollection struct {
        MinorGcs        int
        FullsweepAfter  int
        MinHeapSize     int
        MinBinVheapSize int
        MaxHeapSize     int
    }
    State                  string
    GlobalPrefetchCount    int
    PrefetchCount          int
    AcksUncommitted        int
    MessagesUncommitted    int
    MessagesUnconfirmed    int
    MessagesUnacknowledged int
    ConsumerCount          int
    Confirm                bool
    Transactional          bool
    IdleSince              string
}

type ConnectionDetails struct {
    PeerHost string
    PeerPort int
    Name     string
}
Message type
Definition of the Message type

The currently received messages in the sub and pub commands is exposed to the filter predicate under the name r.msg. The Message type is more or less the same as the amqp.Delivery type from the golang amqp package:

type Message struct {
    Headers Table

    // Properties
    ContentType     string    // MIME content type
    ContentEncoding string    // MIME content encoding
    DeliveryMode    uint8     // queue implementation use - non-persistent (1) or persistent (2)
    Priority        uint8     // queue implementation use - 0 to 9
    CorrelationId   string    // application use - correlation identifier
    ReplyTo         string    // application use - address to reply to (ex: RPC)
    Expiration      string    // implementation use - message expiration spec
    MessageId       string    // application use - message identifier
    Timestamp       time.Time // application use - message timestamp
    Type            string    // application use - message type name
    UserId          string    // application use - creating user - should be authenticated user
    AppId           string    // application use - creating application id

    // Valid only with Channel.Consume
    ConsumerTag string

    // Valid only with Channel.Get
    MessageCount uint32

    DeliveryTag uint64
    Redelivered bool
    Exchange    string // basic.publish exchange
    RoutingKey  string // basic.publish routing key

    Body []byte
}

Build from source

Download and build using go install

$ go install github.com/jandelgado/rabtap/cmd/rabtap@latest

Build using Makefile and tests

To build rabtap from source, you need go (version >= 1.18) and golangci-lint installed.

$ git clone https://github.com/jandelgado/rabtap && cd rabtap
$ make test  -or- make short-test
$ make

In order to run all tests (make test) an instance of RabbitMQ is expected to run on localhost. Easiest way to start one is running make run-broker, which will start a RabbitMQ docker container (i.e. docker run -ti --rm -p 5672:5672 -p 15672:15672 rabbitmq:3-management). Another target, short-tests runs only unit-tests that down reach out to RabbitMQ.

Experimental WASM/wasip1 port

Rabtap can be compiled for Web Assembly (WASM) and the new wasip1 GOOS and run on the console using, e.g. wasirun. Example:

$ go version
go version go1.21.3 linux/amd64
$ make wasm-build
CGO_ENABLED=1 GOOS=wasip1 GOARCH=wasm go build -o ./bin/rabtap-wasm ./cmd/rabtap
$ wasirun --version
wasirun v0.6.5
$ wasirun  bin/rabtap-wasm -- --api "http://guest:password@localhost:15672/api" info --no-color
http://localhost:15672/api (broker ver='3.12.6', mgmt ver='3.12.6', cluster='rabbit@3ea5bf2bac2f')
└─ Vhost /
   ├─ amq.direct (exchange(direct), [D])
   ├─ amq.fanout (exchange(fanout), [D])
   ├─ amq.headers (exchange(headers), [D])
   ├─ amq.match (exchange(headers), [D])
   ├─ amq.rabbitmq.trace (exchange(topic), [D|I])
   └─ amq.topic (exchange(topic), [D])

Another example using wasirun and wasmedge to publish and subscribe to a queue:

$ URI="amqp://guest:password@localhost/"
$ rabtap queue create test
$ rabtap queue bind test to amq.topic --bindingkey=key
$ echo "hello" | wasmedge  bin/rabtap-wasm  --uri "$URI" pub --exchange amq.topic --routingkey=key
$ wasirun  bin/rabtap-wasm -- --uri "$URI" sub test --limit=1
------ message received on 2023-10-29T11:48:56Z ------
exchange.......: amq.topic
routingkey.....: key
hello

See my blog for details.

Limitations:

  • environment variables like RABTAP_AMQPURI not supported, must specify all options on the command line
  • depending on the runtime, colors must explicitly set or disabled using --color and --no-color, since terminal detection not working.

Test data generator

A simple test data generator tool for manual tests is included in the cmd/testgen directory.

Contributing

  • fork this repository
  • create your feature branch
  • add code
  • add tests and make sure test coverage does not fall (make test)
  • add documentation
  • commit changes
  • submit a PR

Author

Jan Delgado (jdelgado at gmx dot net)

Copyright and license

Copyright (c) 2017-2024 Jan Delgado. rabtap is licensed under the GPLv3 license.