DMD Extensions

Features for DMD owners* that aren't officially supported

Real DMDs for virtual pinball cabinets are pretty cool but they need to be supported by the software running the games. This is an attempt to fill some gaps.

* And even if you don't have a real DMD, there's awesome stuff too!

Supported Displays

Currently supported displays:

• PinDMD v3, full RGB support
• PinDMD v2, 4 bit (16 shades) support
• PinDMD v1, 2 bit (4 shades) support
• PIN2DMD, full RGB support
• Pixelcade, full RGB support
• Virtual DMD on a computer monitor, renders nice dots and is useful for debugging.
• Alphanumeric Virtual, a high-resolution virtual segmented display for pre-DMD area games.
• Network, use dmdext to send and receive data through the network.
• You can also stream the DMD to a browser in your LAN, because, why not!

Features

The primary goal of this project was to add support for real DMDs for games that don't provide support out of the box. Supported games are:

• Pinball FX2/3 through frame grabbing from screen
• Farsight's The Pinball Arcade through grabbing the DMD texture from memory
• Pro Pinball Timeshock through their message queue
• Visual PinMAME through DmdDevice.dll
• Future Pinball through using Macro's FP Intercept that sends DMD frames through a pipe.

The command line tool can also display image files on the DMD device and render frames to bitmap files. Many features like this are described in the command line options below, so have a close look at those as well.

Version 1.7

DMD Extensions also support dynamic DMD coloring previously onlyavailable for PIN2DMD displays (both side-channel and VNI).

Version 1.8

DMD Extensions supports high-resolution rendering of segmented alpha-numeric displays:

Documentation how to enable and customize this feature can be found here.

Since v1.8, DMD Extensions come with full network support. Documentation can be found here

Version 1.9

We've introduced a more complex shader with awesome effects for monitor users. Documentation can be found here.

Version 1.10

Thanks to Funkyman and Lucky1, we now have 64 color content support including all color modes (LCM, CM, MR, etc). 256x64 content also works and uses new scaling options (scale2x, doubler). All current PIN2DMD vin/pal content is now officially supported. Uncolorized and standard colorized content can also be scaled using the new modes as well. The new options are listed below.

Install Instructions

Download the installer and run it. A few notes:

• The installer will overwrite any existing dmddevice.dll in your VPM folder if you choose to install it (existing INI files are untouched).
• If you're on Windows x64, you probably want to install both 32 and 64-bit versions. They can live happily next to each other.
• The reason for installing both versions is that your VPM is probably 32-bit, so you'll need the 32-bit DmdDevice.dll and if you're using dmdext.exe with the 64-bit version of Pro Pinball, it will only work with the 64-bit version.
• However, if you don't have Pro Pinball, just 32-bit will do fine, and if don't use VPM then just 64-bit will do fine as well. And if you're on a 32-bit Windows, then just take the 32-bit version.
• The installer will add the install folder of dmdext.exe to the PATH environment variable, but only if the platform is the same:
  • DMD Extensions (64-bit) on Windows x64 is added to PATH
  • DMD Extensions (32-bit) on Windows 32-bit is added to PATH
  • All other combinations aren't added to PATH
• The installer will set the DMDDEVICE_CONFIG environment variable to the location of your DmdDevice.ini. That means from wherever you launch DmdDevice.dll (or run dmdext.exe with --use-ini), the same DmdDevice.ini will be used.
• During installation, when a feature is deactivated, that means the installer couldn't find the host program. For VPM that means that you haven't registered VPinMAME.dll. For Pro Pinball it means it's not installed via Steam, and you'll need to select its installation folder manually.

Test

1. Open a command prompt ([Windows]+[R], cmd, [enter])
2. Type dmdext test -d auto [enter]

You should see a test image on your DMD as well as on a virtual DMD.

Pinball FX2

1. Enable cabinet options in Pinball FX2
2. Resize the DMD to:
   • Width: 520
   • Height: 136
3. Move the DMD to somewhere hidden like off-screen or behind the playfield (usually at 0/0).
4. Open a command prompt ([Windows]+[R], cmd, [enter])
5. Type dmdext mirror --source=pinballfx2 --no-virtual [enter] (or pinballfx3 for FX3)
6. Start Pinball FX2/3

For further tweaking, see options below.

Pinball FX3

The DMD from Pinball FX3 is pulled directly from the memory.

1. Open a command line prompt ([Windows], type cmd, [enter])
2. Type dmdext mirror --source=pinballfx3 --no-virtual [enter]
3. Start Pinball FX3 and play a game.

It doesn't matter whether Pinball FX3 is started before or after dmdext, and it works with or without cabinet mode.

Note that while the current memory grabber code should also work for future Pinball FX3 versions, we obviously can't guarantee it. If a new version breaks dmdext, you should still be able to fall back to the legacy screen grabber that is used by Pinball FX2 by using the --fx3-legacy flag.

The Pinball Arcade

For TPA we're pulling frames off the DMD texture from TPA's memory.

1. Open a command line prompt ([Windows], type cmd, [enter])
2. Type dmdext mirror --source=pinballarcade --no-virtual [enter]
3. Start the DX11 version of The Pinball Arcade.
4. Select and start a game (only then it starts mirroring, during attract mode it doesn't, even though TPA does display the DMD).

Currently re-running dmdext while TPA is running doesn't work and will be addressed soon.

Also note that currently only 128x32 DMD games are supported, that means no EM games neither Frankenstein which has a different resolution.

If you happen switch tables often and the last DMD frame gets stuck on your DMD when changing to an EM game, you can use the --idle-after option to clear the screen.

Pro Pinball Ultra

In version 1.2.1, Barnstorm Games added support for external hardware through a message queue. To get it running, do the following:

1. Make sure you have dmdext.exe in your PATH
2. Copy ProPinballSlave.bat to the Pro Pinball installation folder (usually at %PROGRAMFILES(X86)%\Steam\SteamLibrary\steamapps\common\Pro Pinball Ultra)
3. Add the following command line parameters when launching ProPinball.exe: m3 dProPinballSlave

Note that this currently works only with the 64-bit version of Pro Pinball. 32 bit binaries will be provided with a later release. If you want to change the options (e.g. show the virtual DMD), edit ProPinballSlave.bat and adopt accordingly.

Visual PinMAME

VPM introduced the possibility of delegating DMD rendering to an external DLL. The main motivation is being able to ship a single build instead of having to release multiple binaries for multiple DMDs.

If you are a PC monitor user or have a RGB display (PinDMDv3 or PIN2DMD), the advantage of dmdext is that Lucky1's coloring features are fully supported. You can set this up as you would for a PIN2DMD:

1. Create an altcolor folder where VPM is installed (usually Visual Pinball\VPinMAME)
2. In that folder, create another one named after the ROM (e.g. simpprty)
3. Download the .pal and .vni file from your favorite virtual pinball site, put them into that folder and name them pin2dmd.pal and pin2dmd.vni
4. Run VPM setup, open the ROM's game options and enable Use external DMD (dll) as well as Colorize DMD.

Future Pinball

Copy Future Pinball/OpenGL32.dll to your Future Pinball folder, i.e. where Future Pinball.exe is located. Now, you can send frames to your DMD by running:

dmdext mirror -s futurepinball

Note that:

• The -q toggle works here, so instead of killing the process you could make it exit automatically when the table closes.
• With -g <name>, you can set the game's name, which will, when used along --use-ini, read the game-specific settings.

For more details check out TerryRed's guide here.

Build Instructions

1. Download and install Visual Studio 2019
2. The unmanaged exports library needs MS Build tools, which come with .NET 3.5. Install Instructions
3. Optional: If you want DmdDevice.dll copied to your VPM folder after build, point the VPM_HOME environment variable to your VPM installation folder.
4. Clone the repo: git clone https://github.com/freezy/dmd-extensions.git
5. Open the .sln file in Visual Studio and build the solution.

If you want to build the installer, you'll need the WiX Toolset and its Visual Studio Extension.

Configuration

Since DmdDevice.dll is called by VPM, we can't pass any configuration parameters to it. Instead, we use DmdDevice.ini which must be located in the same folder as VPinMAME.dll or at the path where the DMDDEVICE_CONFIG environment variable is pointing to.

Note however that it's also possible to make dmdext.exe use the ini instead of command line parameters (using the --use-ini parameter).

Output Configuration

Since v1.8 you can also tell dmdext.exe to read the output configuration from DmdDevice.ini instead of passing them as command line arguments. The options are described below.

The output are described by block below.

Command Line	DmdDevice.ini	Description
-r, --resize	[global] resize	How to downscale SEGA 192x64 pixel games to smaller displays. Can have three values: stretch - Just fill the available space and ignore the aspect ratio fill - Fill it up so the whole DMD is filled while keeping aspect ratio intact. Pixels will be cropped off. fit - Scale it so the whole image fits on the DMD while keeping aspect ratio intact. There will be white space (uh, more like black space).
--flip-x	[global] fliphorizontally	Flips the image horizontally (left/right)
--flip-y	[global] flipvertically	Flips the image vertically (top/down)
n/a	[global] colorize	Enable or disable frame-by-frame colorization (inactive in VPX bundle)
-d virtual --no-virtual	[virtualdmd] enabled	Shows a virtual DMD that renders on the computer screen somewhat nicely
--virtual-stay-on-top	[virtualdmd] stayontop	Virtual DMD stays on top of most other windows
n/a	[virtualdmd] ignorear	If true, allow free resizing of the virtual DMD, otherwise the aspect ratio is locked to the DMD's.
n/a	[virtualdmd] useregistry	If true, read the virtual DMD position from VPM's registry.
--virtual-position	[virtualdmd] left top width height	Position of the virtual DMD. Command line takes in all four in the shown order, where the last (height) is optional.
--virtual-dotsize	[virtualdmd] dotsize	Scale dot size. Use 0.8 for previous default setting.
-d pindmdv1	[pindmd1] enabled	Enables the 2-bit pinDMD display.
-d pindmdv2	[pindmd2] enabled	Enables the 4-bit pinDMD2 display.
-d pindmdv3	[pindmd3] enabled	Enables the RGB24 pinDMDv3 display.
--port	[pindmd3] port	COM port, e.g. COM3.
-d pin2dmd	[pin2dmd] enabled	Enables the RGB24 PIN2DMD display.
n/a	[pin2dmd] delay	Delay in milliseconds to wait after loading a palette.
n/a	[video] enabled	Enables creating an .avi video from the DMD frames.
n/a	[video] path	Path to folder or .avi file. If a folder is given, it will create a file named after the current game.
n/a	[browserstream] enabled	Enables streaming the DMD in real time to your browser in your LAN.
n/a	[browserstream] port	Port of the web server to listen on
--pinup	[pinup] enable	Enables output to PinUP.
--scaler-mode	[global] scalermode	Scaler mode for standard content (vpm frames). Note: This is only active if you have 256x64 colorized content files OR have the scaletohd option enabled. Can have two scaling modes: doubler - Doubles all pixels scale2x - Using Scale2x algorithm for smooth 2x scaling.
--scale-to-hd	[global] scaletohd	If true, always scale standard vpm frames to 256x64 Only works on 128x32 vpm games Virtual DMD output looks amazing with Scale2x! Console mirror options work and can be scaled up Also works with 128x32 output devices (pindmd3) using a down scale method to retain Scale2x look.

You can also override all options per game by using the game's name as section name and pre-fixing options with the name of the section (apart from [global] options, which aren't prefixed). For example if you have a PinDMD2 and don't want to use it for Baywatch which has a different resolution, you would create a section like this:

[baywatch]
pindmd2 enabled = false
virtualdmd enabled = true
virtualdmd left = 2500
virtualdmd top = 800
virtualdmd width = 1024
virtualdmd height = 256

This is also useful if you just want to fit the virtual DMD onto different backglasses which have slightly different positions.

Also note that dmdext can retrieve the DMD's position from VPM's registry setting. That means you can use VPM to position the DMD and dmdext will take the same setting for each game. This behavior can be enabled using the useregistry option.

Command Line Configuration

Input options only apply to dmdext.exe, because the DLL is called externally from VPM where no configuration is necessary (apart from enabling it in VPM).

The following parameters are valid for all of dmdext's commands:

Parameter	Description	Default
--use-ini	Use output configuration from DmdDevice.ini	none
-c, --color	Sets the color of a grayscale source that is rendered on an RGB destination.	ff3000
-q, --quit-when-done	Exit the program when finished, e.g. when Pinball FX2 doesn't receive any frames anymore.	false
--quit-after	Exit after n milliseconds. If set to -1, waits indefinitely or until source finishes when -q used.	-1
--no-clear	Don't clear screen when quitting.	false
-o, --output-to-file	If set, writes all frames as PNG bitmaps to the provided folder.

Note that all options of dmdext.exe are also available via command line:

dmdext --help
dmdext mirror --help
dmdext play --help
dmdext test --help

Mirror

The mirror command has the following additional parameters:

Parameter	Description	Default
-s, --source	Required. The source you want to retrieve DMD data from. One of: [ pinballfx2, pinballfx3, pinballarcade, propinball, screen ].	n/a
-f, --fps	How many frames per second should be mirrored.	25
--idle-after	Wait for number of milliseconds until clearing the screen. Disable with 0.	0
--idle-play	Play this file while idleing instead of blank screen. Supported formats: JPG, PNG, GIF. Animated GIFs are supported.	none
--position	screen - Position and size of screen grabber source. Four values: <Left> <Top> <Width> <Height>.	0 0 128 32
--resize-to	screen - Resize captured screen to this size. Two values: .	128 32
--grid-spacing	screen - How much of the white space around the dot should be cut off (grid size is defined by --resize-to). 1 means same size as the dot, 0.5 half size, etc. 0 for disable.	0
--propinball-args	propinball - Arguments send from the Pro Pinball master process. Usually something like: ndmd w0_0_0_0_w m392. Will be set automatically when called through Pro Pinball.
--fx3-legacy	pinballfx3 - If set, don't use the memory grabber but the legacy screen grabber, like Pinball FX2.	false

Play

The play command has the following additional parameters:

Parameter	Description	Default
-f, --file	Path to the file to play. Currently supported file types: PNG, JPG, BIN (raw).	none

Compatibility

This application is based on .NET 4.5, which only runs on Windows 7 or later. Probably on Vista too, but who cares. If you're still running WinXP then you have my sincerest sympathy, but that's as far as I go. ;)

Breaking Changes

v1.8.0

• Data types in configuration files are now culture invariant. Meaning if you are running under a Windows UI Culture such as German which normally represents decimals with commas instead of periods you will need to change your configuration file (such as DMDDevice.ini) to use periods for decimal data. The most common example would be those users who are using dotsize setting in your DMDDevice.ini. This was done to standardize the format of numeric data accross different languages.
• Hardware DMDs aren't probed per default anymore, unless you specifically set the destination. For most people that means that you'll need to provide the -d option when running dmdext.exe.
• If you are a PinDMD3 user and are using colored ROMs, you'll want to upgrade your firmware.

Troubleshooting

Flickering with PinDMDv3

Some users reported heavy flickering when running via PinballX. Seems that this is linked to the desktop settings. This seems to help:

• Go to My Computer
• Click on Performance Information and Tools on the bottom left
• Click on Adjust Visual Effects at the top left.
• When the Performance Window pops up, click on Adjust for Best Appearance. All the boxes should automatically get check marked.
• Click on Apply, and then OK to get out.

Thanks to xman72!

Still flickering?

Try boosting how fast dmdext grabs the frames. For example, for Pinball FX2, try:

dmdext mirror --source=pinballfx2 --no-virtual -q --fps 60

Default is 25, which seems too slow for some games.

Thanks smoke007 for the tip!

DmdDevice.ini Ignored?

This project comes bundled in two versions: A library which is loaded by VPM called DmdDevice.dll, and an executable, dmdext.exe for all the other applications.

The executable ignores DmdDevice.ini because it's configured through command line options.

Slow rendering on certain ROMs with VPM?

Use VPM 3.1. If you can't wait there's a beta build here.

Thanks to djrobx for the fix an all others at #52 for reporting.

Weird positioning or no DMD visible at all?

When you override High DPI scaling in the host app (e.g. vpinballx.exe), dmdext is put into a different coordinate system, so your DmdDevice.ini's position settings are applied differently. This can lead to wrong positioning or complete off-screen rendering.

Thanks to outhere for the tip!

Reporting Bugs

Make sure you include the application log. You can usually find it at the same place you copied your DmdDevice.dll or dmdext.exe. However, there are two premises for the log to be created:

1. You need a log config file. If there's no log config file, no log is created. The log config file is called DmdDevice.log.config for DmdDevice.dll and dmdext.log.config for dmdext.exe. They must be at the same place as the DLL and EXE respectively.

2. The user running the host app must have write permissions to the log folder. Per default that's the current directory. If you have copied the DLL to the Windows\SysWOW64 folder, you don't have write access. In this case you need to write the log elsewhere. You can do that by editing the log config file. The format of the log file is XML. To change the log file location, find this line:

   <target xsi:type="File" name="file" fileName="DmdDevice.log"
   

   And change the fileName attribute to somewhere you can write, for example:

   <target xsi:type="File" name="file" fileName="C:\Users\youruser\DmdDevice.log"
   

For problems with DmdDevice.dll, specially with coloring, set the log level to Trace and reproduce the problem. You can do that by editing DmdDevice.log.config and changing:

<logger name="*" minlevel="Info" writeTo="file" />

to

<logger name="*" minlevel="Trace" writeTo="file" />

If you have a crash, please also include which OS/bitness you're using. If it's about the DLL, let us know where you copied the DLL and which host application you're using (VPM's setup.exe orvpinball.exe, also which version).

You can post bugs at VPF or VPU, but preferably here.

Manual Installation

1. Download the .zip archive, copy its content to your hard drive, preferable in your PATH, and unblock the .exe file (right-click, properties, unblock).
2. Download and install the Visual C++ Redistributables for Visual Studio 2017.
3. If you haven't already, download and install the .NET Framework 4.5.2.

If you want to use DMD Extensions with VisualPinMAME:

1. Copy DmdDevice.dll, DmdDevice.ini and DmdDevice.log.config into your VPM folder (usually at Visual Pinball\VPinMAME).
2. Run the VPM setup
3. Click on Test, select the game and click on Game Options.
4. Enable Use External DMD and optionally disable Show DMD.

You can also set this as the default by selecting Default Options in the VPM setup, however note that games that you've already configured won't be affected.

x64 vs x86

• For dmdext.exe, take the bitness of your OS. This is important for Pro Pinball, where the bitness of the binary must be the same as dmdext's.
• For dmddevice.dll you probably want the 32-bit version unless you've set up VPM with Setup64.exe and you know what you're doing.

Developer Setup

After cloning the repo, you'll need to restore the DllExport dependency. There is a script that does it for you. Go into the cloned repo and run:

DllExport -action Restore -sln-file DmdExtensions.sln

Then there is an issue with Fody third party addin that may give you an error ith the $(IntermediateOutputPath).

If this occurs, simply close Visual Studio and re-launch the DMD Extensions project and the issue will go away.

Reference

Credits

• NoEx for the excellent TPA grabber code, as well as the Pinball FX3 memory grabber.
• Tom Speirs, Lucky1, CarnyPriest and Russdx for their help on the DMD code
• Lucky1 for instructions and details about the coloring features and Pin2DMD support.
• DJRobX for helping with the dynamic coloring, better performance and much more.
• mjrgh for debugging and optimizing stuff.
• Adrian Page from Barnstorm for his help setting up the slave correctly.
• Funkyman for 64 color support, 256x64 scaling options, bug fixes and code cleanup.

Finally, thanks to JetBrains for their awesome tools and support of the Open Source Community!

License

GPLv2, see LICENSE.