philosophy | goals | for who? | screenshots | documentation | contribute | achievements | FAQ
![Gitter](https://badges.gitter.im/Join Chat.svg)
Quick Install:
git clone --recursive http://github.com/syl20bnr/spacemacs ~/.emacs.d
Table of Contents
- Introduction
- Features
- Batteries Included
- Nice UI
- Excellent Evil Support
- Convenient and Mnemonic Key Bindings
- [Great Documentation](#great-documentationdocumentationmd)
- Prerequisites
- Install
- Update
- Configuration
- Learning Spacemacs
- Contributions
- FAQ
Spacemacs
is a user-friendly and well-documented Emacs kit that integrates the
best Emacs packages out there. It uses Evil Mode to combine the ergonomic
editing features of Vim with the extensibility of Emacs.
Spacemacs is designed to be approachable to users coming from Vim--you do not need any prior experience with Emacs to get started.
If you are already an experienced Emacs user, you will appreciate the clean customization system and tight integration of the included packages.
Spacemacs is currently in beta, and contributions are welcome.
Spacemacs integrates hundreds of packages and is ready to use with no additional configuration. It provides excellent support for many languages, including the following:
It also comes with Git support and project management tools. All these features are loaded on-demand to keep startup time short.
The Spacemacs community provides additional configurations that extend the default distribution.
Spacemacs looks good. It comes with high-quality themes and a custom low-clutter modeline.
Spacemacs is designed around Vim keyboard bindings, provided by Evil Mode. The packages distributed with Spacemacs are customized to integrate seamlessly with Evil.
Spacemacs improves upon Vim by using task-specific states to group related commands. These states reduce the keystrokes needed to issue repetitive commands and reduce the number of keyboard bindings to learn.
Spacemacs
organizes key bindings into mnemonic groups. For example, commands
to operate on the buffer are prefixed by <SPC> b
, and commands to operate on
the project are under <SPC> p
.
There is no need to learn convoluted Emacs key chords--Spacemacs uses memorable bindings that are easy to type.
Great Documentation
Most of Spacemacs' features are extensively documented, along with key bindings and configuration options.
If you need help, ask your question in the Gitter Chat and a member of the community will help you out.
Spacemacs
is tested with Emacs 24.3 and 24.4. It should boot on all the major
OSes where these versions can be installed.
Some modes require third-party tools that you'll have to install via your favorite package manager.
The recommended version for OS X is emacs-mac-port. It can be installed from homebrew with the following commands:
$ brew tap railwaycat/emacsmacport
$ brew install emacs-mac
The default key handling is different from the official OS X port. To correct this you can add the osx layer to your dotfile layer list:
(setq-default dotspacemacs-configuration-layers '(osx))
Note that the emacs-mac-port
server behaves differently than the regular
Emacs server.
Details can be found on the emacs-mac-port README.
-
If you have an existing Emacs configuration, back it up:
cd ~ mv .emacs.d .emacs.bak
-
Clone this repository with its submodules:
git clone --recursive http://github.com/syl20bnr/spacemacs ~/.emacs.d
master
is the stable branch and is regularly updated. Switch to thedevelop
branch if you want to use the bleeding-edge version. -
Launch Emacs. Spacemacs will automatically install the packages it requires.
-
Restart Emacs to complete the installation. If you see something like this:
Loading............................................................Ready!
[121 packages loaded in 3.208s]
You should be good to go! Otherwise, see the troubleshooting guide.
Spacemacs currently requires manual updates using the following procedure:
-
Update Emacs packages by clicking (press
RET
) on the[Update]
link of the starting page -
Close Emacs and update the git repository:
git pull --rebase git submodule sync; git submodule update
-
Restart Emacs to complete the upgrade.
For convenience an indicator is displayed in the mode-line whenever a new
version of Spacemacs
is available.
Symbol | Description
:------------------------------------:|---------------------------------- | less than 3 releases behind | less than 5 releases behind | 5 or more releases behind
Note:
Update of Spacemacs
by clicking on the indicator will be implemented soon.
You can rollback ELPA packages to a previous version if anything went wrong during an update.
To rollback to a previous state click (press RET
) on the [Rollback]
link of the startup page and choose a rollback slot.
Rollback slot names are dates with the following format YYYY-MM-DD_HH.MM.SS
.
The date corresponds to the date of an update. The most recent slots are
listed first.
Spacemacs
divides its configuration into self-contained units called
configuration layers. These layers can be stacked on top of each other
to achieve a custom configuration.
Spacemacs
also uses a dotfile ~/.spacemacs
to control which layers to
load and to quick configure some Spacemacs
features.
A configuration layer is a directory containing at least the following files:
packages.el
: Defines and configures packages to be downloaded from Emacs package repositories usingpackage.el
extensions.el
: Configures packages which cannot be downloaded withpackage.el
such as built-in Emacs features and git submodules.
If you already have your own Emacs
configuration you can move it to your
own layer.
The following command creates a layer in the private
directory:
<SPC> : configuration-layer/create-layer RET
Any configuration layers you create must be explicitly loaded in your
~/.spacemacs
file.
Note: For your privacy, the contents of the private
directory are not
under source control. See the documentation for a discussion on how to
manage your private configuration.
The .spacemacs
file controls which configuration layers to load and provides
a way to customize Spacemacs
.
The following command will create a .spacemacs
file in your home directory:
<SPC> : dotspacemacs/install RET
To open the installed dotfile:
<SPC> f e d
Example to load some configuration layers using the variable
dotspacemacs-configuration-layers
:
;; List of configuration layers to load.
dotspacemacs-configuration-layers '(company-mode smex)
Some configuration layers have configuration variables to enable specific
support. For instance the git layer has several configuration variables,
they can be set directly in the dotspacemacs-configuration-layers
like this:
;; List of configuration layers to load.
dotspacemacs-configuration-layers '(company-mode
(git :variables
git-magit-status-fullscreen t
git-enable-github-support t
git-gutter-use-fringe t)
smex)
At anytime you can apply the changes made to the dotfile without restarting
Spacemacs
by pressing SPC m c c.
The comments in this file contain further information about how to customize Spacemacs. See the dotfile configuration section of the documentation for more information.
Press SPC h T to start the Vimtutor adapted for Evil.
Spacemacs key bindings use a leader key which is set by default to SPC key (space bar).
You can change it easily by setting the variable dotspacemacs-leader-key
in
your ~/.spacemacs
file.
In spacemacs the universal argument is by default on <SPC> u
instead of C-u
which is used to scroll up as in Vim.
By using helm-spacemacs
with SPC f e h you can quickly search
for a package and get the name of the layers using it.
You can also easily go to the README.md
of a layer or go to the initialization
function of a package.
Thanks to guide-key, whenever a prefix command is pressed (like <SPC>
)
a buffer appears after one second listing the possible keys for this prefix.
It is also possible to search for specific key bindings by pressing:
<SPC> ?
To narrow the list to Spacemacs
key bindings starting with prefix <SPC>
,
set the pattern to something like the regular expression:
SPC\ b
The example above will list all the buffer
related bindings.
Describe functions
are powerful Emacs introspection commands to get information
about functions, variables, modes and so on.
These functions are accessible with the following bindings:
Key Binding | Description |
---|---|
<SPC> h d f |
describe-function |
<SPC> h d k |
describe-key |
<SPC> h d m |
describe-mode |
<SPC> h d v |
describe-variable |
Spacemacs
needs you!
Especially to grow the number of configuration layers, for instance to support new languages.
If you are ready to contribute please consult the contribution guidelines first.
-
Which version of Spacemacs am I running ? The version is displayed on the upper right corner of the loading screen. It is also possible to display the version with SPC f e v.
-
Why are packages installed with package-install automatically deleted by Spacemacs when it starts ? To declare new packages you have to create a new configuration layer, see the quick start guide here.
-
The Spacemacs banner is ugly, what should I do ? Install the default font supported by Spacemacs or choose a fixed width font. More information in the font section of the documentation.
-
The powerline separators are ugly, how can I fix them ? Use the property
:powerline-scale
of the variabledotspacemacs-default-font
. More information in the font section of the documentation. -
Why don't the powerline arrows show in the terminal, even with a patched font ? Emacs powerline implementation does not use patched fonts. Currently there are no mode-lines in Emacs that support patched fonts. The corresponding feature request for the powerline can be found here.
-
The powerline separators have no anti-aliasing, what can I do ? Emacs powerline uses XMP images to draw the separators. Enabling anti-aliasing may not be a trivial task so unfortunately you'll have to live with it. Nevertheless there exist a large number of different separators -- you can try to set up a different one with less aliasing (arrows for instance), alternatively you can disable them (note that the tilde characters on buffer empty lines have the same limitations).
-
Why do the fonts on Windows looks so crappy ? You can install MacType on Windows to get very nice looking fonts. It is also recommended to disable smooth scrolling on Windows.
-
How to fix the error: The directory ~/.emacs.d/server is unsafe ? Change the owner of the directory
~/.emacs.d/server
:
- from Properties select the Tab “Security”,
- select the button “Advanced”,
- select the Tab “Owner”
- change the owner to your account name Source: Stackoverflow
- Why are the powerline colors not correct on OS X ?
This is a known issue as of Emacs 24.4 due to
ns-use-srgb-colorspace
defaulting to true. It is recommended to use the emacs-mac-port build. See the install OSX section for more info on this.