- Nevermore Micro V5 Duo (dual fan)
- Bearing stacks instead of toothed idlers
- Single MGN12
Klicky- ERCF
- Extrusion Backers (only on Y)
- Voron Tap
- Beefy Front Idlers
- GE5C Slim
$ labelle --qr "web+spoolman:s-XXX" "SUNLU" "ABS" "Black"
MMU_GATE_MAP GATE=2 MATERIAL=ABS+ COLOR=FFFF00 SPOOLID=2
$ ~/klipper_config/script/update_mcu.sh
$ cd ~/klipper
$ make menuconfig
[*] Enable extra low-level configuration options
Micro-controller Architecture (Linux process) --->
() GPIO pins to set at micro-controller startup
$ make clean && make
$ sudo service klipper stop
$ make flash
$ sudo service klipper start
https://github.com/FYSETC/FYSETC-SPIDER
[*] Enable extra low-level configuration options
Micro-controller Architecture (STMicroelectronics STM32) --->
Processor model (STM32F446) --->
Bootloader offset (64KiB bootloader) --->
Clock Reference (12 MHz crystal) --->
Communication interface (Serial (on USART1 PA10/PA9)) --->
(250000) Baud rate for serial port
() GPIO pins to set at micro-controller startup
$ make clean && make
$ sudo service klipper stop
$ ./scripts/flash-sdcard.sh /dev/ttyAMA0 fysetc-spider-v1
$ sudo service klipper start
https://github.com/bigtreetech/MMB
Micro-controller Architecture (STMicroelectronics STM32) --->
Processor model (STM32G0B1) --->
Build CanBoot deployment application (Do not build) --->
Clock Reference (8 MHz crystal) --->
Communication interface (CAN bus (on PB0/PB1)) --->
Application start offset (8KiB offset) --->
(1000000) CAN bus speed
() GPIO pins to set at micro-controller startup
[*] Support bootloader entry on rapid double click of reset button
[ ] Enable bootloader entry on button (or gpio) state
[ ] Enable Status LED
[*] Enable extra low-level configuration optionsMicro-controller
Micro-controller Architecture (STMicroelectronics STM32) --->
Processor model (STM32G0B1) --->
Bootloader offset (8KiB bootloader) --->
Clock Reference (8 MHz crystal) --->
Communication interface (CAN bus (on PB0/PB1)) --->
(1000000) CAN bus speed
() GPIO pins to set at micro-controller startup
$ python3 ~/katapult/scripts/flashtool.py -i can0 -u 13d7b8824ae8 -f ~/klipper/out/klipper.bin
https://github.com/bigtreetech/EBB/tree/master/EBB%20SB2240_2209%20CAN
Micro-controller Architecture (STMicroelectronics STM32) --->
Processor model (STM32G0B1) --->
Build CanBoot deployment application (8KiB bootloader) --->
Clock Reference (8 MHz crystal) --->
Communication interface (CAN bus (on PB0/PB1)) --->
Application start offset (8KiB offset) --->
(1000000) CAN bus speed
() GPIO pins to set at micro-controller startup
[*] Support bootloader entry on rapid double click of reset button
[ ] Enable bootloader entry on button (or gpio) state
[*] Enable Status LED
(PA13) Status LED GPIO Pin
[*] Enable extra low-level configuration optionsMicro-controller
Micro-controller Architecture (STMicroelectronics STM32) --->
Processor model (STM32G0B1) --->
Bootloader offset (8KiB bootloader) --->
Clock Reference (8 MHz crystal) --->
Communication interface (CAN bus (on PB0/PB1)) --->
(1000000) CAN bus speed
() GPIO pins to set at micro-controller startup
python3 ~/katapult/scripts/flashtool.py -i can0 -u f7ad7cd429e2 -f ~/klipper/out/klipper.bin