Skip to content

muca-board/muca-firmware

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

15 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

MuCa - Firmware

Before starting

If you ordered the board online, the flashing is not required!

This code is a form from ft5x06-tool, largely inspired from the Focaltech GitHub driver.

Requirements

The source code itself isn't depending any external library, so no build dependency.

As for runtime dependency, the kernel must have i2c-dev support enabled.

You need to have a physical access to the i2c ports, like raspberry pi.

To enable i2c-dev:

sudo raspi-config
5 > Interfacing options
P5 I2C
<Enable>

Build instructions

Very straight-forward:

$ git clone https://github.com/muca-board/muca-firmware.git
$ cd muca-firmware/
$ make

Usage With Flashing Rig

I setup a flashing rig to flash the Muca board. You don't need this rig if you don't need to flash 650 boards.

$ sudo python3 muca-flash-autorun.py

Usage

To upload the firmware to the Muca Board (FT5316DME)

$ ./muca-flash -b 1 -c 0x0A -i MuCaFirmware.bin 

On a raspberry pi, the i2c bus is set to 1. The chip id has to be forced because the firmware is empty.

The tool has an help output which lists all the different parameters.

FT5x06 tool usage: ft5x06-tool [OPTIONS]
OPTIONS:
	-a, --address
		I2C address of the FT5x06 controller (hex). Default is 0x38.
	-b, --bus
		I2C bus the FT5x06 controller is on. Default is 1.
	-c, --chipid
		Force chip ID to the value (hex). Default is read from controller.
	-i, --input
		Input firmware file to flash.
	-o, --output
		Output firmware file read from FT5x06.
	-d, --debug
		Enable or disable I2C debug. Default 0, 1 to enable
	-h, --help
		Show this help and exit.

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published