Skip to content

tksc/tpm2-tss-engine

 
 

Repository files navigation

Linux Build Status Code Coverage Language grade: C/C++ Coverity Scan

Overview

The tpm2-tss-engine project implements a cryptographic engine for OpenSSL for Trusted Platform Module (TPM 2.0) using the tpm2-tss software stack that follows the Trusted Computing Groups (TCG) TPM Software Stack (TSS 2.0). It uses the Enhanced System API (ESAPI) interface of the TSS 2.0 for downwards communication. It supports RSA decryption and signatures as well as ECDSA signatures.

If you are looking for a provider following the OpenSSL 3.0 provider API instead of the engine API, please head over to tpm2-openssl

Operations

Key hierarchies

The keys used by this engine are all located underneath an ECC restricted primary storage decryption key. This key is created on each invocation (since ECC key creation is faster than RSA's). Thus, no persistent SRK key need to be predeployed.

The authorization value for the storage hierarchie (the owner password) is assumed to be clear (of zero length). If this is not the case, it needs to be set using the engine ctrl.

Key types

The RSA keys are created with the ability to sign as well as to decrypt. This allows all RSA keys to be used for either operation. Note: The TPM's RSA sign operation will enforce tagging payloads with an ASN.1 encoded identifier of the used hash algorithm. This is incompatible with OpelSSL's RSA interface structures. Thus, the TPM2_RSA_Decrypt method is also used for signing operations which also requires decrypt capabilities to be activated for this key.

The ECDSA keys are created as ECDSA keys with the ability to perform signature operations.

Build and install instructions

Instructions to build and install tpm2-tss are available in the INSTALL file.

Usage

For additional usage examples, please consider the integration tests under tests/*.sh.

Engine information

Engine informations can be retrieved using

openssl engine -t -c tpm2tss

Random data

A set of 10 random bytes can be retrieved using

openssl rand -engine tpm2tss -hex 10
engine "tpm2tss" set.
WARNING:esys:src/tss2-esys/esys_tcti_default.c:137:tcti_from_file() Could not load TCTI file: libtss2-tcti-default.so
WARNING:esys:src/tss2-esys/esys_tcti_default.c:137:tcti_from_file() Could not load TCTI file: libtss2-tcti-tabrmd.so
40ac9191079e490d17b7
WARNING:esys:src/tss2-esys/esys_tcti_default.c:137:tcti_from_file() Could not load TCTI file: libtss2-tcti-default.so
WARNING:esys:src/tss2-esys/esys_tcti_default.c:137:tcti_from_file() Could not load TCTI file: libtss2-tcti-tabrmd.so

Note: These warnings stem from the tpm2-tss libraries and are not an issue, as long as a TPM connection is established afterwards by a different tcti.

RSA operations

RSA decrypt

The following sequence of commands creates an RSA key using the TPM, exports the public key, encrypts a data file and decrypts it using the TPM:

tpm2tss-genkey -a rsa -s 2048 mykey
openssl rsa -engine tpm2tss -inform engine -in mykey -pubout -outform pem -out mykey.pub
openssl pkeyutl -pubin -inkey mykey.pub -in mydata -encrypt -out mycipher
openssl pkeyutl -engine tpm2tss -keyform engine -inkey mykey -decrypt -in mycipher -out mydata

Alternatively, the data can be encrypted directly with the TPM key using:

openssl pkeyutl -engine tpm2tss -keyform engine -inkey mykey -encrypt -in mydata -out mycipher

RSA sign

The following sequence of commands creates an RSA key using the TPM, exports the public key, signs a data file using the TPM and validates the signature:

openssl rsa -engine tpm2tss -inform engine -in mykey -pubout -outform pem -out mykey.pub
openssl pkeyutl -engine tpm2tss -keyform engine -inkey mykey -sign -in mydata -out mysig
openssl pkeyutl -pubin -inkey mykey.pub -verify -in mydata -sigfile mysig

Alternatively, the data can be validated directly using: openssl pkeyutl -engine tpm2tss -keyform engine -inkey mykey -verify -in mydata -sigfile mysig Note: mydata must not exceed the size of the RSA key, since these operation do not perform any hashing of the input data.

ECDSA operations

The following sequence of commands creates an ECDSA key using the TPM, signs a data file using the TPM and validates the signature:

tpm2tss-genkey -a ecdsa mykey
openssl pkeyutl -engine tpm2tss -keyform engine -inkey mykey -sign -in mydata -out mysig
openssl pkeyutl -engine tpm2tss -keyform engine -inkey mykey -verify -in mydata -sigfile mysig

To export the public key use:

openssl ec -engine tpm2tss -inform engine -in mykey -pubout -outform pem -out mykey.pub

Self Signed certificate generate operation

The following sequence of commands creates self signed certificate using TPM key. Openssl command sets tpm2tss as engine and generates a self signed certificate based on provided CSR configuration information.

$ tpm2tss-genkey -a rsa rsa.tss
$ openssl req -new -x509 -engine tpm2tss -key rsa.tss  -keyform engine -out rsa.crt

Signing using restricted key

Signing using a restricted ECDSA key is possible with the caveat that the TPM must be used for the digest, so higher-level digest & sign operations must be used instead, e.g.:

$ openssl dgst -engine tpm2tss -keyform engine -sha256 -sign ${HANDLE} -out mysig mydata.txt

Where ${HANDLE} is the TPM persistent handle ID for the restricted key created by an external tool (since tpm2tss-genkey doesn't support creating restricted keys).

TLS and s_server

This engine can be used in all places where OpenSSL is used to create a TLS secure channel connection. You have can specify the command

./tpm2tss-genkey -a rsa rsa.tss
openssl req -new -x509 -engine tpm2tss -key rsa.tss  -keyform engine  -out rsa.crt
openssl s_server -cert rsa.crt -key rsa.tss -keyform engine -engine tpm2tss -accept 8443

For ECDSA keys however, the Hash algorithm needs to be specified because the TPM does not support SHA512. You can blacklisting SHA512 universally. That is possible via openssl.cnf. See the "SignatureAlgorithms" configuration file command on this page: https://www.openssl.org/docs/man1.1.1/man3/SSL_CONF_cmd.html

Note: Usage of s_server with HSM-protected private keys is only supported on OpenSSL 1.1.0 and newer.

Development prefixes

In order to use this engine without make install for testing call:

export LD_LIBRAY_PATH=${TPM2TSS}/src/tss2-{tcti,mu,sys,esys}/.libs
export PKG_CONFIG_PATH=$PWD/../tpm2-tss/lib
./bootstrap
./configure \
    CFLAGS="-I$PWD/../tpm2-tss/include" \
    LDFLAGS="-L$PWD/../tpm2-tss/src/tss2-{esys,sys,mu,tcti}/.libs"
make
make check

About

OpenSSL Engine for TPM2 devices

Resources

License

Code of conduct

Security policy

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 72.8%
  • Shell 15.6%
  • M4 7.1%
  • Makefile 4.5%