The work done under newpost-4th branch has been merged into main for 4th axis support.
The post processor will be using inverse-time feed mode for A-axis by default, but can be set to degree-per-minute feed if desired. The post processor will not be using RTCP (rotational tool center point control, G43.4, G43.5) or feature coordinate system (G68.2) since these features are optional and usually not purchased with Syil X7.
| Feature | Notes |
|---|---|
| 4th axis | Default to OFF, turn on via Use 4th/A-axis setting in post config |
| Turn on coolant early | Coolant on before G0 move |
| In process probing | Uses Renishaw macros |
| Custom table position | Configurable when posting, incl. A-axis |
| NC passthrough | |
| In process tool measure & break control | Configurable via Fusion tool library, manual NC, or enable for all in post |
| M7 air blast | |
| M10/11 clamp/unclamp code | For 4th axis |
| Degree-per-minute feed option | For 4th axis |